I100N50X4B ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
USA/Canada: Toll Free: Europe (315) 432 8909 (800) 544 2414 +44 2392 232392 M odel I 100N50X4B Features: RoHS Compliant 100 Watts DC GHz Al N Ceramic Non Nichrome Resistive Element Low VSWR 100% Tested Half Flange Termination 100 Watts, 50
Description
I 100 N50X B is high performance A luminum Nitride (AlN) half flang e term ination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating c irculators , and for use in power combiners The t ermination is a lso RoHS complia nt! General Specifications Resistive Element Thick F ilm Substrate AlN Ceramic Mounting Flange Copper, nickel plated per QC N 290 Operating Temperature C to +150 C (see de rating chart) Tolerance is 0.010”, unless otherwise specified. Designed to meet o r exceed applicable portions of MIL E 5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 O hms, Power: Watts Frequency Range: DC
4.0 GHz
26 dB to 1.3 GHz > 2 dB to 4.0GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change with out notice. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES LEAD LENGTH: 0.150” MIN 1 of 2
USA/Canada: Toll Free: Europe: (315) 432 8909 (800) 544 2414 +44 2392 232392 Model I 100N50X4B Typical Performance: 0.00 1.00 2.00 3.00 4.00 Freq (GHz) -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 Return Loss (dB) 2.00 1.00 0.50 1.00 -1.00 0.50 -0.50 0.20 -0.20 0.00 100 110 120 130 140 150 160 170 180 -170 -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 Smith Chart 1 Power De rating: Mounting Footprint and Procedure: Actual performance could be limited by the solder properties of the application 2 of 2