I100N50X4 ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
USA/Canada: Toll Free: Europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 Model I100 N50 X4 Features:
- RoHS Compliant
- 100 Watts
- DC – 3.0 GHz
- AlN Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Flange Mount Termination
100 Watts, 50 ΩΩ ΩΩ
Description
The I100N50X4 is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternat ive to Beryllium Oxide (BeO). The termination is well suited to all cellul ar frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high pow er handling makes the part ideal for terminating circulators, a nd for use in power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick Film Substrate AlN Ceramic Cover Alumina Ceramic Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, ± 2% Power: 100 Watts Frequency Range: DC – 3.0GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Storage temperature is -20° C to 85 ºC . Operating temperature is -55ºC to 125ºC (see chart for derating temperatures). Specifications subject to change with out notice. Outline Drawing Note: All dimensions in inches – 1inch = 2.54cm. Le ad Length: 0.150in min. I100N50X4 (097) Rev D. ROHS Compliant
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model I100 N50 X4 Typical Performance: Power De-rating: Mounting Footprint and Procedure: I100N50X4 (097) Rev D. ROHS Compliant