HWZT-3.58MD ABRACON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

  • Clock oscillation for microcontrollers
  • Telephones
  • Household electric appliances
  • Low resonant impedance
  • Small size, Light weight.
  • Low cost timing solution Siz e Varies LEADED CERAMIC RESONATOR STANDARD SPECIFICATIONS: APPLICATIONS:FEATURES:

30332 Esperanza, Rancho Santa Margarita, California 92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Revised: 05.07.13Visit www.abracon.com for Terms & Conditions of Sale TEST CONDITION AND TEST CIRCUIT: OPTIONS & PART IDENTIFICATION: ABRACON IS CERTIFIED ABRACON IS ISO9001:2008 CERTIFIED X: Ceramic Resonator Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±2°C, Humidity: 65±5% R.H.) is regulated to measure Parameters Minimum Typical Maximum Units Notes Frequency Range 2.00 6.00 MHz 12.51 60.00 Resonant Impedance (Ro) Ω 2.00 MHz ~ 2.99 MHz 30 3.00 MHz ~ 6.00 MHz 30 12.51 MHz ~ 60.00 MHz Standard Load Capacitance for test circuit (C1=C2) 24 30 36 pF 2.00 MHz ~ 6.00 MHz 24 30 36 12.51 MHz ~ 20.00 MHz 12 15 18 20.01 MHz ~ 25.99 MHz 4 5 6 26.00 MHz ~ 60.00 MHz Frequency Tolerance -0.5 +0.5 % Frequency Stability -0.3 +0.3 % -25ºC to +85ºC Withstanding Voltage 50 Vdc DC , 1 min Insulation Resistance 100 MΩ 10Vdc, 1min Operation Temperature -25 +85 ºC Storage Temperature -55 +85 ºC Aging Rate (Fosc) -0.3 0.3 % From initial value HWZT - MD - Frequency Frequency in MHz Packaging Blank: Bulk A: AMMO package* *AMMO package lead length 13.5mm Pb in ceramic, exemption (7c-I) RoHS/RoHS II Compliant

OUTLINE DRAWING: CAUTION HWZT-MD Siz e Varies LEADED CERAMIC RESONATOR tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Revised: 05.07.13Visit www.abracon.com for Terms & Conditions of SaleABRACON IS CERTIFIED ABRACON IS ISO9001:2008 CERTIFIED Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Freq. Range: 2.00 ~ 6.00MHz (Low Profile) Bulk: AMMO: Freq. Range: 12.51 ~ 60.00MHz Bulk: AMMO: H : 12.51 ~ 23.99MHz, 10.0mm max 24.00 ~ 31.99MHz, 7.5mm max 32.00 ~ 60.00MHz, 6.5mm max 10.0max H 5.0max 0.25±0.1 5.0±1.0 5.0±0.30 0.5±0.1 *:EIAJ MONTHLY CODE Pb in ceramic, exemption (7c-I) RoHS/RoHS II Compliant (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliability life dependant applications. ContactAbracon Corporation prior to using this product when in doubt., Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod- uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability.