HWS80A-12

TDK Electronics

Single Output 15W 節?150W

Manufacturer: TDK Electronics

Document: 56 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from TDK Electronics Browse H parts

Online Datasheet

Read HWS80A-12 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 56

Technical content

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS-A SERIES ˙ Product Line up 4JOHMF0VUQVU8 ʙ 8 Output Voltage 15W 30W 50W 80W 100W 150W Output Current MODEL Output Current MODEL Output Current MODEL Output Current MODEL Output Current MODEL Output Current MODEL 3.3V 3A HWS15A-3 6A HWS30A-3 10A HWS50A-3 16A HWS80A-3 20A HWS100A-3 30A HWS150A-3 5V 3A HWS15A-5 6A HWS30A-5 10A HWS50A-5 16A HWS80A-5 20A HWS100A-5 30A HWS150A-5 15V 1A HWS15A-15 2A HWS30A-15 3.5A HWS 50A-15 5.4A HWS80A-15 7A HWS100A-15 10A HWS150A-15 XBSSBOUZ $4" &/6-$4"$ )84"""" 8JUIDPWFS HWS-A $POUFOUT ˔ #MPDL%JBHSBN 4FRVFODF5JNF$IBSU ‛ B@)84"@1BHF ˔ *OTUSVDUJPO.BOVBM ‛ B@)84"@1BHF ʤ)84""ʥ )84"ʵ˘ ˙ Features ˙Model naming method Blank: Without cover(standard) / AɿWith cover / Rɿ Remote ON/OFF control, withoout cover (HWS50A,80A,100A,150A only) / RAɿ Remote ON/OFF control, with cover (HWS50A,80A,100A,150A only) / ADINɿ DIN rail mountable (24Vout of 15-150W models with cover only) / Bɿ Connector connection(JST) (HWS50A,80A,100A,150A only, 100A and 150A,12V-48V only) Nominal Output Voltage ɹɹex. 3 : 3.3V, 5 : 5V, 48 : 48V 4FSJFTOBNF 0VUQVUQPXFS ˙ Applications ˔ Environmentally-friendly ɾ Contributing to energy conservation of the customer's equipment in a further high efﬁciency ɾAlso improve efﬁciency at light load ɾReduction of no-load power ˔ Easy to use ɾEnlarge ambient temperature to ensure the load factor of 100% to 50 ˆ from 40 ˆ , the customer's equipment is up the degree of freedom of the mechanism design even at high temperatures ʢAmbient temperatureɹ-10ˆ to +70ˆʣ ˔ Safety and security ɾReduce the maintenance frequency of your device by a long life ɾDouble-sided board adopted inherited the conventional model ɾ"Safety terminal" covering current ﬂowing part secures safety for users. "No screw-dropping" design prevents from losing screws during maintenance operation. 5IJTNFBOTUIBU JODPOGPSNJUZXJUI&6%JSFDUJWF MFBE DBENJVN NFSDVSZ IFYBWBMFOUDISPNJVN BOE TQFDJpDCSPNJOFCBTFEqBNFSFUBSEBOUT 1##BOE1#%& IBWFOPUCFFOVTFE FYDFQUGPSFYFNQUFEBQQMJDBUJPOT ˙ Conformity to RoHS Directive ZHE

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. For start up at low ambient temperature and low input voltage, output ripple noise might not meet speciﬁcation. However, speciﬁcation can be met after one second. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. )84 ITEMS/UNITS MODEL HWS15A-3 HWS15A-5 HWS15A-12 HWS15A-15 HWS15A-24 HWS15A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Efﬁciency(100VAC) (typ) (*1) % 70 77 80 81 82 82 Efﬁciency(200VAC) (typ) (*1) % 71 79 83 84 85 82 Input Current (100/200VAC) (typ) (*1) A 0.24/0.15 0.35/0.2 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 3 3 1.3 1 0.65 0.33 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Remote ON/OFF - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:80%, +70ˆ:60%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 160 (With cover: 190) Size (W x H x D) mm 26.5 x 82 x 80 ʢRefer to Outline Drawing ʣ HWS15A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS15A

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board ʲ)84"ʳ [unit: mm] VOLTAGE ADJUSTMENT LED (GREEN) AC(L) AC(N) FG 5-M3.5 (10.1) (14) 31.5±1 (WITH COVER) (17) 8.4 7.3 (67.5) 26.5±1 (WITHOUT COVER) COVER ([/A]TYPE) NAME PLATE 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm (5) 67±0.5 (5.5) 17 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm (10) 62±0.5 8 80±1 8 68±0.5 19MAX 82±1 Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm ˔HWS15A/A (WITH COVER) (OPTIONS/ADDIN INCLUDING)˔HWS15A Ta (°C) LOAD (%) Ta (°C) LOAD (%) MOUNTING (A) MOUNTING (B), (C), (D)MOUNTING (A), (B), (C), (D) MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE Output Derating Outline Drawing HWS15A

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. For start up at low ambient temperature and low input voltage, output ripple noise might not meet speciﬁcation. However, speciﬁcation can be met after one second. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by t he each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. )84 *5&.46/*54 .0%&- HWS30A-3 HWS30A-5 HWS30A-12 HWS30A-15 HWS30A-24 HWS30A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Efﬁciency(100VAC) (typ) (*1) % 75 80 84 85 86 86 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 7 78 28 68 78 88 7 Input Current (100/200VAC) (typ) (*1) A 0.5/0.3 0.65/0.4 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 6 6 2.5 2 1.3 0.65 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Remote ON/OFF - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:60%, +70ˆ:40%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Ou tput : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 200 (With cover: 240) Size (W x H x D) mm 26.5 x 82 x 95 ʢRefer to Outline Drawing ʣ HWS30A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS30A

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE ʲ)84"ʳ [unit: mm] 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm (5) 82±0.5 (5.5) 17 LED (GREEN) AC(L) AC(N) FG (14) (17) 8.4 7.3 (10.1) 5-M3.5 (67.5) COVER ([/A]TYPE) 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm 8 68±0.5 (10) 77±0.5 8 19MAX 95±1 82±1 31.5±1 (WITH COVER) 26.5±1 (WITHOUT COVER) VOLTAGE ADJUSTMENT NAME PLATE Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm MOUNTING (A) MOUNTING (B), (C), (D) ˔HWS30A/A (WITH COVER) (OPTIONS/ADDIN INCLUDING)˔HWS30A Ta (°C) LOAD (%) Ta (°C) LOAD (%) MOUNTING (A), (B), (C), (D) Output Derating Outline Drawing HWS30A

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) N o load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or max imum output current, do not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. 1MFBTFSFGFSUP5%,-BNCEB &.$'JMUFSTDBUBMPH ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 HWS50A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS50A *5&.46/*54 .0%&- HWS50A-3 HWS50A-5 HWS50A-12 HWS50A-15 HWS50A-24 HWS50A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.85 0.97/0.91 Efﬁciency(100VAC) (typ) (*1) % 76 82 83 83 84 84 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 7 88 48 58 68 78 6 Input Current (100/200VAC) (typ) (*1) A 0.45/0.25 0.65/0.35 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 10 10 4.3 3.5 2.2 1.1 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Remote ON/OFF - (/R Option: Output ON in the external voltage is applied) Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:70%, +70ˆ:40%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Weight (typ) g 260 (With cover: 300) Mechanical Size (W x H x D) mm 26.5 x 82 x 120 ʢRefer to Outline Drawing ʣ

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm ʶ PIN HEADER SOCKET HOUSING TERMINAL PINS HAND CRIMRING TOOL /R (Option) Remote ON / OFF control connector (JST) ˞ Housing and terminal pin are not attached to the product. B2B-XH-AM XHP-2 BXH-001T-P0.6PSSXH-001T-P0.6 YC-110RPSYRS-110 "$ / "$ - ʶ (WITH COVER) ʶ (WITHOUT COVER) COVER ([/A]TYPE) 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm REMOTE ON/OFF CONTROL CONNECTOR ([/R] TYPE) 3 3 ."9 ʶ ʶ ʶ ʶ ."9 SOCKET HOUSING (CN1 SOCKET HOUSING (CN51 TERMINAL PINS (CN1,CN51) /B (Option) Recommended connector (it is not affixed to the product) HAND CRIMRING TOOL: YC-160R JST) 1"35/".& 7)3/ 7)3/ #7)51PS47)51 MANUFACT +45 +45 +45 25: CONNECTOR INPUT SIDE(CN1) CONNECTOR OUTPUT SIDE(CN51) /B (Option)6TFDPOOFDUPS ˞Output terminal, please use one pin per 5A below. 1"35/".& ʣ/4ʢʣ'-ʢ)71# ʣ/4ʢʣ'-ʢ)71# MANUFACT +45 +45 25: VOLTAGE ADJUSTMENT LED (GREEN) [unit: mm] "$ - "$ / NAME PLATE Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm /B (OPTION) CONNECTOR HWS50A Outline Drawing MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE ʲ)84"ʳ Ta (°C) LOAD (%) Ta (°C) LOAD (%) ˔HWS50A/A (WITH COVER) (Including options model/RA, /ADDIN)˔HWS50A(Including options model/R, /B) MOUNTING (B), (D) MOUNTING (A) MOUNTING (C) MOUNTING (B), (D) MOUNTING (A) MOUNTING (A) Output Derating

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 *5&.46/*54 .0%&- HWS80A-3 HWS80A-5 HWS80A-12 HWS80A-15 HWS80A-24 HWS80A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.87 0.98/0.91 Efﬁciency(100VAC) (typ) (*1) % 81 83 85 85 86 87 Efﬁciency(200VAC) (typ) (*1) % 83 85 87 87 88 89 Input Current (100/200VAC) (typ) (*1) A0 . 7 2 / 0 . 3 6 1 . 0 4 / 0 . 5 2 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 16 16 6.7 5.4 3.4 1.7 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Remote ON/OFF - (/R Option: Output ON in the external voltage is applied) Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47(200VAC Line only) Environment Operating Temperature (*10) ˆ -10 ʙ+70(-10ʙ+50ˆ:100%, +60ˆ:80%, +70ˆ:60%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 420 (With cover: 470) Size (W x H x D) mm 28 x 82 x 160 ʢRefer to Outline Drawing ʣ HWS80A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS80A 1MFBTFSFGFSUP5%,-BNCEB &.$'JMUFSTDBUBMPH ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, const ant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load ( %) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives.

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS80A MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE PIN HEADER SOCKET HOUSING TERMINAL PINS HAND CRIMRING TOOL B2B-XH-AM XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 YC-110R or YRS-110 [unit: mm] 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 15.5 (5.5) (15) 125±0.5 20 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm REMOTE ON/OFF CONTROL CONNECTOR ([/R] TYPE) (10) 19MAX (17) 135±0.5 160±1 8 68±0.5 82±1 5MAX (75) AC(N) FG AC(L) AC(N) FG AC(L) 7-M3.5 (10.1) 8.6 109.2 7.3 8.4(9) (14) 33±1 (WITH COVER) 28±1 (WITHOUT COVER) COVER ([/A]TYPE) VOLTAGE ADJUSTMENT LED (GREEN) CN1 CN51 FG AC(L) AC(N) NAME PLATE Qty(max) 2 pcs 1 pcs 2 pcs t(max) 0.8mm 1.0mm 0.8mm D(max) 8.1mm 6.8mm Recommended Solderless Terminal Others Terminal PART DESCRIPTION SOCKET HOUSING (CN1) SOCKET HOUSING (CN51) TERMINAL PINS (CN1,CN51) /B (Option) Recommended connector (it is not affixed to the product) HAND CRIMRING TOOL: YC-160R (JST) PART NAME VHR-5N VHR-6N BVH-21T-P1.1 or SVH-21T-P1.1 MANUFACT JST JST JST QTY PART DESCRIPTION CONNECTOR INPUT SIDE(CN1) CONNECTOR OUTPUT SIDE(CN51) /B (Option) Use connector ˞Output terminal, please use one pin per 5A below. PART NAME ʣNSʢʣFLʢHV-5P3B ʣNSʢʣFLʢHV-P4B MANUFACT JST JST QTY /R (Option) Remote ON / OFF control connector (JST) ˞ Housing and terminal pin are not attached to the product. /B (OPTION) CONNECTOR Outline Drawing ʲ)84"ʳ Ta (°C) LOAD (%) Ta (°C) LOAD (%) ˔HWS80A/A (WITH COVER) (Including options model/RA, /ADDIN)˔HWS80A(Including options model/R, /B) MOUNTING (B), (D) MOUNTING (A) MOUNTING (C) MOUNTING (B) MOUNTING (A) MOUNTING (C), (D) Output Derating

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board *5&.46/*54 .0%&- HWS100A-3 HWS100A-5 HWS100A-12 HWS100A-15 HWS100A-24 HWS100A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.89 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 82 84 86 86 87 88 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 8 48 68 88 88 99 0 Input Current (100/200VAC) (typ) (*1) A 0.9/0.45 1.3/0.65 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 20 20 8.5 7 4.5 2.1 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Remote ON/OFF - (/R Option: Output ON in the e xternal voltage is applied) Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:65%, +70ˆ:30%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 420 (With cover: 470) Size (W x H x D) mm 28 x 82 x 160 ʢRefer to Outline Drawing ʣ HWS100A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS100A 1MFBTFSFGFSUP5%,-BNCEB &.$'JMUFSTDBUBMPH ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, const ant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (% ) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives.

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS100A MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE [unit: mm] 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 15.5 (5.5) (15) 125±0.5 20 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm REMOTE ON/OFF CONTROL CONNECTOR ([/R] TYPE) (10) 19MAX (17) 135±0.5 160±1 8 68±0.5 82±1 5MAX (75) AC(N) FG AC(L) AC(N) FG AC(L) 7-M3.5 (10.1) 8.6 109.2 7.3 8.4(9) (14) 33±1 (WITH COVER) 28±1 (WITHOUT COVER) COVER ([/A]TYPE) /B (OPTION) CONNECTOR CN1 CN51 FG AC(L) AC(N) NAME PLATE Qty(max) 2 pcs 1 pcs 2 pcs t(max) 0.8mm 1.0mm 0.8mm D(max) 8.1mm 6.8mm Recommended Solderless Terminal Others Terminal PART DESCRIPTION SOCKET HOUSING (CN1) SOCKET HOUSING (CN51) TERMINAL PINS (CN1,CN51) /B (Option) Recommended connector (it is not affixed to the product) HAND CRIMRING TOOL: YC-160R (JST) PART NAME VHR-5N VHR-6N BVH-21T-P1.1 or SVH-21T-P1.1 MANUFACT JST JST JST QTY PART DESCRIPTION CONNECTOR INPUT SIDE(CN1) CONNECTOR OUTPUT SIDE(CN51) /B (Option) Use connector ˞Output terminal, please use one pin per 5A below. PART NAME ʣNSʢʣFLʢHV-5P3B ʣNSʢʣFLʢHV-P4B MANUFACT JST JST QTY /R (Option) Remote ON / OFF control connector (JST) ˞ Housing and terminal pin are not attached to the product. PIN HEADER SOCKET HOUSING TERMINAL PINS HAND CRIMRING TOOL B2B-XH-AM XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 YC-110R or YRS-110 VOLTAGE ADJUSTMENT LED (GREEN) Outline Drawing ʲ)84"ʳ ∗ Refer to dotted line for output derating curve, when input voltage range is "85VACÙVin<90VAC" for the Mounting (A). MOUNTING (B) MOUNTING (A) MOUNTING (C), (D) MOUNTING (B) MOUNTING (A) MOUNTING (C) MOUNTING (D) Ta (°C) LOAD (%) Ta (°C) LOAD (%) ˔HWS100A/A (WITH COVER) (Including options model/RA, /ADDIN)˔HWS100A(Including options model/R, /B) Output Derating

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 *5&.46/*54 .0%&- HWS150A-3 HWS150A-5 HWS150A-12 HWS150A-15 HWS150A-24 HWS150A-48 Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.89 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 8 28 58 58 68 88 9 Efﬁciency(200VAC) (typ) (*1) % 8 48 78 88 99 09 1 Input Current (100/200VAC) (typ) (*1) A 1.3/0.65 1.9/0.95 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 30 30 13 10 6.5 3.3 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Remote ON/OFF - (/R Option: Output ON in the external voltage is applied) Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:60%, +70ˆ:20%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDCC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. With cover models only ɿApproved by UL508, CSA C22.2 No.107.1-01. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*11) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*11) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 470 (With cover: 520) Size (W x H x D) mm 37 x 82 x 160 ʢRefer to Outline Drawing ʣ (*1) At 100VAC/200VAC, Ta=25ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, d o not exceed its derating of maximum load. (*11) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. 1MFBTFSFGFSUP5%,-BNCEB &.$'JMUFSTDBUBMPH ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 HWS150A SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS150A

B@)84"@ HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS150A MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE [unit: mm] 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm (6.1) 17 18.5 (15) 131±0.5 14 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm REMOTE ON/OFF CONTROL CONNECTOR ([/R] TYPE) (17) 135±0.5 8 19MAX 160±1 8 68±0.5 82±1 (10) 3.5MAX (75) VOLTAGE ADJUSTMENT LED (GREEN) AC(N) AC(L) FG (14.6) (10.7) (9) 8.4 7.3 9.2 10 8.6 7-M3.5 COVER ([/A]TYPE) 42±1 (WITH COVER) 37±1 (WITHOUT COVER) CN1 CN51 FG AC(L) AC(N) NAME PLATE /B (OPTION) CONNECTOR PIN HEADER SOCKET HOUSING TERMINAL PINS HAND CRIMRING TOOL B2B-XH-AM XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 YC-110R or YRS-110 Qty(max) 2 pcs 1 pcs 2 pcs t(max) 0.8mm 1.0mm 0.8mm D(max) 8.1mm 6.8mm Recommended Solderless Terminal Others Terminal PART DESCRIPTION SOCKET HOUSING (CN1) SOCKET HOUSING (CN51) TERMINAL PINS (CN1,CN51) /B (Option) Recommended connector (it is not affixed to the product) HAND CRIMRING TOOL: YC-160R (JST) PART NAME VHR-5N VHR-6N BVH-21T-P1.1 or SVH-21T-P1.1 MANUFACT JST JST JST QTY PART DESCRIPTION CONNECTOR INPUT SIDE(CN1) CONNECTOR OUTPUT SIDE(CN51) /B (Option) Use connector ˞Output terminal, please use one pin per 5A below. PART NAME ʣNSʢʣFLʢHV-5P3B ʣNSʢʣFLʢHV-P6B MANUFACT JST JST QTY /R (Option) Remote ON / OFF control connector (JST) ˞ Housing and terminal pin are not attached to the product. Outline Drawing ʲ)84"ʳ MOUNTING (A) MOUNTING (B), (C), (D) ∗ In the case of using at the input voltage range "85 VAC ʽ Vin <90VAC", output derating will be dashed line. (Mounting direction(A) only) Ta (°C) LOAD (%) Ta (°C) LOAD (%) ˔HWS150A/A (WITH COVER) (Including options model/RA, /ADDIN)˔HWS150A(Including options model/R, /B) MOUNTING (B) MOUNTING (A) MOUNTING (C), (D) Output Derating

B@)84"@

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board ˙ Features ˔Power supply for harsh environment, heavy industry equipment, etc. ɹɾGuaranteed start-up at Ta=-40ˆ . (*1) ɹɾInternal PCB coating (*2) ɹɾ Compliant to MIL-STD-810F , the standard for the products for military use (vibration resistance/shock resistance). ˔ Environmentally-friendly ɹɾ Contributing to energy conservation of the customer's equipment in a further high efﬁciency ˔ Easy to use ɹɾAll models in the same hight of 82mm. Mountable in 2U-height racks without dead space. ˔ Safety and security ɹɾReduce the maintenance frequency of your device by a long life ɹɾDouble-sided board adopted inherited the conventional model ɹɾ"Safety terminal" covering current ﬂowing part secures safety for users. "No screw-dropping" design prevents from losing screws during maintenance operation. HWS-A/HD ˙ Product Line up 4JOHMF0VUQVU8 ʙ 8 XBSSBOUZ $4" Output Voltage 30W 50W 100W 150W Output Current MODEL Output Current MODEL Output Current MODEL Output Current MODEL 3.3V 6A HWS30A-3/HD 10A HWS50A-3/HD 20A HWS100A-3/HD 30A HWS150A-3/HD 5V 6A HWS30A-5/HD 10A HWS50A-5/HD 20A HWS100A-5/HD 30A HWS150A-5/HD 12V 2.5A HWS30A-12/HD 4.3A HWS50A-12/HD 8.5A HWS100A-12/HD 13A HWS150A-12/HD 15V 2A HWS30A-15/HD 3.5A HWS50A-15/HD 7A HWS100A-15/HD 10A HWS150A-15/HD 24V 1.3A HWS30A-24/HD 2.2A HWS50A-24/HD 4.5A HWS100A-24/HD 6.5A HWS150A-24/HD 48V 0.65A HWS30A-48/HD 1.1A HWS50A-48/HD 2.1A HWS100A-48/HD 3.3A HWS150A-48/HD ˙Model naming method ʤ)84""ʥ )84"ʵ)% Nominal Output Voltage ex. 3 : 3.3V, 5 : 5V, 48 : 48V 4FSJFTOBNF 0VUQVUQPXFS ˙ Applications (*1) The power supply might not start up according to the input voltage and the load condition at the low temperature (Ta: -40 to -10ˆ). For details, please refer to" Start-up condition at the low temperature". (*2) For resistance against humidity, dust-related improvement-resistant, board both sides are coated. But it may not be completely possible for the effect because there is the point that is not coated partly. Please refer for the details to us HD ɿWithout cover for harsh environment HDAɿWith cover for harsh environment 5IJTNFBOTUIBU JODPOGPSNJUZXJUI&6%JSFDUJWF MFBE DBENJVN NFSDVSZ IFYBWBMFOUDISPNJVN BOE TQFDJpDCSPNJOFCBTFEqBNFSFUBSEBOUT 1##BOE1#%& IBWFOPUCFFOVTFE FYDFQUGPSFYFNQUFEBQQMJDBUJPOT ˙ Conformity to RoHS Directive

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. For start up at low ambient temperature and low input voltage, output ripple noise might not meet speciﬁcation. However, speciﬁcation can be met after one second. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by th e each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. - For conditions of start up at -40 ˆ to -10ˆ , refer to Start-up condition at low temperature. (*11) Category 4 exposure levels : Track transportation over U.S. highways, Composite two-wheeled trailer. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. )84 MODEL HWS30A -3/HD HWS30A -5/HD HWS30A -12/HD HWS30A -15/HD HWS30A -24/HD HWS30A -48/HD Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Efﬁciency(100VAC) (typ) (*1) % 75 80 84 85 86 86 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 7 78 28 68 78 88 7 Input Current (100/200VAC) (typ) (*1) A 0.5/0.3 0.65/0.4 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 6 6 2.5 2 1.3 0.65 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0 ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10 ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +71 (-10 to +50ˆ:100%, +60ˆ:60%, +71ˆ:40%), , start up -40 to -10 Storage Temperature ˆ -40 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration (*11) At no operating, 10-55HzʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Designed to meet MIL-STD-810F 514.5 Category 4, 10 Shock Less than 196.1m/s Designed to meet MIL-STD-810F 516.5 Procedure I, VI Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed to meet Den-an Appendix 8 at 100VAC only. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 200 Size (W x H x D) mm 26.5 x 82 x 95 ʢRefer to Outline Drawing ʣ HWS30A/HD SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS30A/HD

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board ʲ)84")%ʳ VOLTAGE ADJUSTMENT LED (GREEN) NAME PLATE 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm [unit: mm] (14) 26.5±1 (17) 8.4 7.3 (10.1) AC(L) AC(N) FG 8 68±0.5 (10) 77±0.5 8 19MAX 95±1 82±1 (67.5) (5) 82±0.5 (5.5) 17 5-M3.5 Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm Output Derating MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE Ta (ˆ) .06/5*/( " -0"% ˋ −10UPʴ50 100 Ta (°C) LOAD (%) MOUNTING (A), (B), (C), (D) Start-up condition at low temperature Stable start up. Stable output after 1 min from start up Input Voltage (VAC) LOAD (%) Input Voltage (VAC) Normal start up. LOAD(%) Stable output after 1 min from start up 85 ʽ Vin < 100 30 100 100 ʽ Vin < 132 50 100 132 ʽ Vin ʽ 265 100 100 ˔DERATING TO START UP AT Ta : -40 to -10ˆ Outline Drawing =NOTES= * At Ta : -40 to -10 ˃C. * Input voltage : Not gradual start up. * Do not use the load that is constant current mode. * Avoid forced air cooling. It is assumed that inside of power supply is heated by self-heating within 1 minutes. * No condensing. * Pay attention to above items before using the unit. Incorrect usage could lead to unstable output voltage. HWS30A/HD

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) N o load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or max imum output current, do not exceed its derating of maximum load. - For conditions of start up at -40 ˆ to -10ˆ , refer to Start-up condition at low temperature. (*11) Category 4 exposure levels : Track transportation over U.S. highways, Composite two-wheeled trailer. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-ev aluated that it meets EMC directives. Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 HWS50A/HD SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS50A/HD -3/HD HWS50A -5/HD HWS50A -12/HD HWS50A -15/HD HWS50A -24/HD HWS50A -48/HD Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.85 0.97/0.91 Efﬁciency(100VAC) (typ) (*1) % 76 82 83 83 84 84 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 7 88 48 58 68 78 6 Input Current (100/200VAC) (typ) (*1) A 0.45/0.25 0.65/0.35 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 10 10 4.3 3.5 2.2 1.1 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0 ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10 ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Output Voltage Range Function Remote Sensing - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +71 (-10 to +50ˆ:100%, +60ˆ:70%, +71ˆ:40%), , start up -40 to -10 Storage Temperature ˆ -40 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration (*11) At no operating, 10-55HzʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Designed to meet MIL -STD-810F 514.5 Category 4, 10 Shock Less than 196.1m/s Designed to meet MIL-STD-810F 516.5 Procedure I, VI Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950-1 Designed t o meet Den-an Appendix 8 at 100VAC only. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Weight (typ) g 260 Mechanical Size (W x H x D) mm 26.5 x 82 x 120 ʢRefer to Outline Drawing ʣ

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board ʲ)84")%ʳ VOLTAGE ADJUSTMENT LED (GREEN) 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm [unit: mm] 5-M3.5 (10.1) (67.5) (15) 19MAX 97±0.5 120±1 8 68±0.5 82±1 (14) 26.5±1 (17) 8.4 7.3 (5.5) 17 (5) 105±0.5 10 AC(N) AC(L) FG NAME PLATE Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm Output Derating Ta (ˆ) MOUNTING (C) LOAD (ˋ) -10 to +45 MOUNTING (A) 100 100 MOUNTING (B),(D) 100 100 100 Start-up condition at low temperature Stable start up. Stable output after 1 min from start up Input Voltage (VAC) LOAD (%) =NOTES= * At Ta : -40 to -10 ˃C. * Input voltage : Not gradual start up. * Do not use the load that is constant current mode. * Avoid forced air cooling. It is assumed that inside of power supply is heated by self-heating within 1 minutes. * No condensing. * Pay attention to above items before using the unit. Incorrect usage could lead to unstable output voltage. Input Voltage (VAC) Normal start up. LOAD(%) Stable output after 1 min from start up ʽ7JO ʽ7JOʽ ˔DERATING TO START UP AT Ta : -40 to -10ˆ Outline Drawing MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE Ta (°C) LOAD (%) MOUNTING (B), (D) MOUNTING (A) MOUNTING (C) HWS HWS50A/HD

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board -3/HD HWS100A -5/HD HWS100A -12/HD HWS100A -15/HD HWS100A -24/HD HWS100A -48/HD Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.89 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 82 84 86 86 87 88 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 8 48 68 88 88 99 0 Input Current (100/200VAC) (typ) (*1) A 0.9/0.45 1.3/0.65 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 20 20 8.5 7 4.5 2.1 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0 ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10 ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +71 (-10 to +50ˆ:100%, +60ˆ:65%, +71ˆ:30%), , start up -40 to -10 Storage Temperature ˆ -40 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration (*11) At no operating, 10-55HzʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Designed to meet MIL-STD-810F 514.5 Category 4, 10 Shock Less than 196.1m/s Designed to meet MIL-STD-810F 516.5 Procedure I, VI Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety Approved by UL60950-1, CSA60950-1, EN6095 0-1 Designed to meet Den-an Appendix 8 at 100VAC only. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 420 Size (W x H x D) mm 28 x 82 x 160 ʢRefer to Outline Drawing ʣ HWS100A/HD SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS100A/HD Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, const ant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (% ) is percent of maximum output power or maximum output current, whichever is greater. - As for other mountings, refer to derating curve. - For conditions of start up at -40 ˆ to -10ˆ , refer to Start-up condition at low temperature. (*11) Category 4 exposure levels : Track transportation over U.S. highways, Composite two-wheeled trailer. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives.

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS100A/HD ʲ)84")%ʳ Output Derating ʵ10 to ʴ40 100 100 Ta (ˆ) MOUNTING (C),(D) LOAD (ˋ) MOUNTING (A) MOUNTING (B) 100 100 Start-up condition at low temperature Stable start up. Stable output after 1 min from start up Input Voltage (VAC) LOAD (%) =NOTES= * At Ta : -40 to -10 ˃C. * Input voltage : Not gradual start up. * Do not use the load that is constant current mode. * Avoid forced air cooling. It is assumed that inside of power supply is heated by self-heating within 1 minutes. * No condensing. * Pay attention to above items before using the unit. Incorrect usage could lead to unstable output voltage. ʽ7JO ʽ7JOʽ Input Voltage (VAC) Normal start up. LOAD(%) Stable output after 1 min from start up ˔DERATING TO START UP AT Ta : -40 to -10ˆ Outline Drawing VOLTAGE ADJUSTMENT LED (GREEN) NAME PLATE 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm AC(N) FG AC(L) 7-M3.5 (10.1) 8.6 109.2 7.3 8.4(9) (14) 28±1 19MAX 160±1 (17) 135±0.5 8 8 68±0.5 82±1 15.5 17(5.5) (15) 125±0.5 20 (75) [unit: mm] Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE Ta (°C) LOAD (%) MOUNTING (B) MOUNTING (A) MOUNTING (C), (D)

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 -3/HD HWS150A -5/HD HWS150A -12/HD HWS150A -15/HD HWS150A -24/HD HWS150A -48/HD Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.96/0.89 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 8 28 58 58 68 88 9 Efﬁciency(200VAC) (typ) (*1) % 8 48 78 88 99 09 1 Input Current (100/200VAC) (typ) (*1) A 1.3/0.65 1.9/0.95 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 3.3 5 12 15 24 48 Maximum Output Current A 30 30 13 10 6.5 3.3 Maximum Line Regulation (*5) mV 20 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0 ʽTaʽ70ˆ) (*4) mV 120 120 150 150 150 200 Maximum Ripple & Noise(-10 ʽTa<0ˆ) (*4) mV 160 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Output Voltage Range Function Remote Sensing Possible Parallel Operation - Series Operation Possible Line DIP Designed to meetSEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +71 (-10 to +50ˆ:100%, +60ˆ:60%, +71ˆ:20%), , start up -40 to -10 Storage Temperature ˆ -40 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration (*11) At no operating, 10-55HzʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Designed to meet MIL-STD-810F 514.5 Category 4, 10 Shock Less than 196.1m/s Designed to meet MIL-STD-810F 516.5 Procedure I, VI Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety Approved by UL60950-1, CSA60950-1, EN60950- 1 Designed to meet Den-an Appendix 8 at 100VAC only. PFHC Designed to meet IEC61000-3-2 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 470 Size (W x H x D) mm 37 x 82 x 160 ʢRefer to Outline Drawing ʣ (*1) At 100VAC/200VAC, Ta=25ˆ , nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, CSA, EN and Den-an (at 60Hz), Ta=25 ˆ. (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not ex ceed its derating of maximum load. - For conditions of start up at -40 ˆ to -10ˆ , refer to Start-up condition at low temperature. (*11) Category 4 exposure levels : Track transportation over U.S. highways, Composite two-wheeled trailer. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 HWS150A/HD SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS150A/HD

B@)84"@ HWS-A/HD ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS150A/HD ʲ)84")%ʳ Output Derating ʵ10 to ʴ30 100 100 100 100 100 100 Ta (ˆ) MOUNTING (C),(D) LOAD (ˋ) MOUNTING (A) MOUNTING (B) Start-up condition at low temperature Input Voltage (VAC) LOAD (%) Stable start up. Stable output after 1 min from start up =NOTES= * At Ta : -40 to -10 ˃C. * Input voltage : Not gradual start up. * Do not use the load that is constant current mode. * Avoid forced air cooling. It is assumed that inside of power supply is heated by self-heating within 1 minutes. * No condensing. * Pay attention to above items before using the unit. Incorrect usage could lead to unstable output voltage. ʽ7JO ʽ7JOʽ Input Voltage (VAC) Normal start up. LOAD(%) Stable output after 1 min from start up ˔DERATING TO START UP AT Ta : -40 to -10ˆ M4M4 ʴSʴV− V − S F G LN (14.6) 37±1 (17) 135±0.5 8 19MAX 160±1 (6.1) 17 18.5 (15) 131±0.5 8 68±0.5 82±1 (75) (10.7) VOLTAGE ADJUSTMENT (9) 8.4 7.3 9.2 10 8.6 5-M3.5 2-M4 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm LED (GREEN) NAME PLATE [unit: mm] 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm ʴV AC(N) AC(L) FG ʴS Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm Outline Drawing MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE Ta (°C) LOAD (%) MOUNTING (B) MOUNTING (A) MOUNTING (C), (D)

B@)84"@

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board ˙ Features ˔AC-DC switching power supply for medical equipment. ɹɾApproval ES60601-1 (*1) ɹɾApproval EN60601-1 (*1) ɹɾApproval CSA-C22.2 No.60601-1 (*1) ˔Environmentally-friendly ɹɾ Contributing to energy conservation of the customer's equipment in a further high efﬁciency ˔ Easy to use ɹɾAll models in the same hight of 82mm. Mountable in 2U-height racks without dead space. ˔Safety and security ɹɾReduce the maintenance frequency of your device by a long life ɹɾDouble-sided board adopted inherited the conventional model ɹɾ"Safety terminal" covering current ﬂowing part secures safety for users. "No screw-dropping" design prevents from losing screws during maintenance operation. HWS-A/ME ˙ Product Line up 4JOHMF0VUQVU8 ʙ 8 Output Voltage 30W 50W 100W 150W Output Current MODEL Output Current MODEL Output Current MODEL Output Current MODEL 5V 6A HWS30A-5/ME 10A HWS50A-5/ME 20A HWS100A-5/ME 30A HWS150A-5/ME 12V 2.5A HWS30A-12/ME 4.3A HWS50A-12/ME 8.5A HWS100A-12/ME 13A HWS150A-12/ME 15V 2A HWS30A-15/ME 3.5A HWS50A-15/ME 7A HWS100A-15/ME 10A HWS150A-15/ME 24V 1.3A HWS30A-24/ME 2.2A HWS50A-24/ME 4.5A HWS100A-24/ME 6.5A HWS150A-24/ME 48V 0.65A HWS30A-48/ME 1.1A HWS50A-48/ME 2.1A HWS100A-48/ME 3.3A HWS150A-48/ME ˙Model naming method ʤ)84""ʥ )84"ʵ.& /PNJOBM0VUQVU7PMUBHF FY7ɺ7 4FSJFTOBNF 0VUQVUQPXFS ˙ Applications (*1) The following conditions are required. ˔ Please use the insulating material for the equipment chassis when the power supply is used in the equipment near patients. ˔ Approved with the basic insulation, an additional insulation circuit is required outside of the power supply. ME ɿWithout cover, approved by safety standardss for medical equipment MEAɿWith cover, approved by safety standardss for medical equipment 5IJTNFBOTUIBU JODPOGPSNJUZXJUI&6%JSFDUJWF MFBE DBENJVN NFSDVSZ IFYBWBMFOUDISPNJVN BOE TQFDJpDCSPNJOFCBTFEqBNFSFUBSEBOUT 1##BOE1#%& IBWFOPUCFFOVTFE FYDFQUGPSFYFNQUFEBQQMJDBUJPOT ˙ Conformity to RoHS Directive XBSSBOUZ &/&4 $4"$

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˃C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. For start up at low ambient temperature and low input voltage, output ripple noise might not meet speciﬁcation. However, speciﬁcation can be met after one second. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by t he each measuring method of UL, EN, and CSA (at 60Hz),Ta = 25ˆ (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) It is the third edition, authorization in MOOP of ES60601-1, EN60601-1, CSA-C22.2 No. 60,601-1. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. )84 -5/ME HWS30A -12/ME HWS30A -15/ME HWS30A -24/ME HWS30A -48/ME Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Efﬁciency(100VAC) (typ) (*1) % 80 84 85 86 86 E f ﬁ c i e n c y ( 2 0 0 V A C ) ( t y p ) ( * 1 ) % 8 28 68 78 88 7 Input Current (100/200VAC) (typ) (*1) A0 . 6 5 / 0 . 4 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 51 2 1 5 2 4 4 8 Maximum Output Current A 6 2.5 2 1.3 0.65 Maximum Line Regulation (*5) mV 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:60%, +70ˆ:40%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety (*11) Approved by ES60601-1, EN60601-1, CSA-C22.2 No.60601-1 PFHC Designed to meet IEC61000-3-2 Voltage Fluctuations / Flicker Emissions Designed to meet IEC61000-3-3 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 200 Size (W x H x D) mm 26.5 x 82 x 95 ʢRefer to Outline Drawing ʣ HWS30A/ME SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS30A/ME

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE ʲ)84".&ʳ VOLTAGE ADJUSTMENT LED (GREEN) NAME PLATE 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm [unit: mm] (14) 26.5±1 (17) 8.4 7.3 (10.1) AC(L) AC(N) FG 8 68±0.5 (10) 77±0.5 8 19MAX 95±1 82±1 (67.5) (5) 82±0.5 (5.5) 17 5-M3.5 Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm Ta (°C) LOAD (%) MOUNTING (A), (B), (C), (D) Output Derating Outline Drawing HWS30A/ME

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board )84HWS50A/ME SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS50A/ME -5/ME HWS50A -12/ME HWS50A -15/ME HWS50A -24/ME HWS50A -48/ME Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.97/0.91 Efﬁciency(100VAC) (typ) (*1) % 82 83 83 84 84 Efﬁciency(200VAC) (typ) (*1) % 84 85 86 87 86 Input Current (100/200VAC) (typ) (*1) A0 . 6 5 / 0 . 3 5 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less tha n 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 51 2 1 5 2 4 4 8 Maximum Output Current A 10 4.3 3.5 2.2 1.1 Maximum Line Regulation (*5) mV 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing - Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:70%, +70ˆ:40%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety (*11) Approved by ES60601-1, EN60601-1, CSA-C22.2 No.60601-1 PFHC Designed to meet IEC61000-3-2 Voltage Fluctuations / Flicker Emissions Designed to meet IEC61000-3-3 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (* 12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Weight (typ) g 260 Mechanical Size (W x H x D) mm 26.5 x 82 x 120 ʢRefer to Outline Drawing ʣ (*1) At 100VAC/200VAC, Ta=25 ˃C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring meth od of UL, EN, and CSA (at 60Hz),Ta = 25ˆ (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) It is the third edition, authorization in MOOP of ES60601-1, EN60601-1, CSA-C22.2 No. 60,601-1. (*12) The power supply is considered a component which will be installed into a ﬁn al equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS VOLTAGE ADJUSTMENT LED (GREEN) 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm [unit: mm] 5-M3.5 (10.1) (67.5) (15) 19MAX 97±0.5 120±1 8 68±0.5 82±1 (14) 26.5±1 (17) 8.4 7.3 (5.5) 17 (5) 105±0.5 10 AC(N) AC(L) FG NAME PLATE Recommended Solderless Terminal Qty(max) 2 pcs t(max) 0.8mm D(max) 6.8mm HWS50A/ME Outline Drawing MOUNTING A STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE ʲ)84".&ʳ Ta (°C) LOAD (%) MOUNTING (B), (D) MOUNTING (A) MOUNTING (C) Output Derating

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board -5/ME HWS100A -12/ME HWS100A -15/ME HWS100A -24/ME HWS100A -48/ME Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 84 86 86 87 88 Efﬁciency(200VAC) (typ) (*1) % 86 88 88 89 90 Input Current (100/200VAC) (typ) (*1) A1 . 3 / 0 . 6 5 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 51 2 1 5 2 4 4 8 Maximum Output Current A 20 8.5 7 4.5 2.1 Maximum Line Regulation (*5) mV 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:65%, +70ˆ:30%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety (*11) Approved by ES60601-1, EN60601-1, CSA-C22.2 No.60601-1 PFHC Designed to meet IEC61000-3-2 Voltage Fluctuations / Flicker Emissions Designed to meet IEC61000-3-3 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 420 Size (W x H x D) mm 28 x 82 x 160 ʢRefer to Outline Drawing ʣ HWS100A/ME SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS100A/ME Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003 (*1) At 100VAC/200VAC, Ta=25 ˃C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, cons tant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, EN, and CSA (at 60Hz),Ta = 25 ˆ (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is pe rcent of maximum output power or maximum output current, do not exceed its derating of maximum load. (*11) It is the third edition, authorization in MOOP of ES60601-1, EN60601-1, CSA-C22.2 No. 60,601-1. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives.

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS100A/ME MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE VOLTAGE ADJUSTMENT LED (GREEN) NAME PLATE 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mm AC(N) FG AC(L) 7-M3.5 (10.1) 8.6 109.2 7.3 8.4(9) (14) 28±1 19MAX 160±1 (17) 135±0.5 8 8 68±0.5 82±1 15.5 17(5.5) (15) 125±0.5 20 (75) [unit: mm] Qty(max) 2 pcs 1 pcs 2 pcs t(max) 0.8mm 1.0mm 0.8mm D(max) 8.1mm 6.8mm Recommended Solderless Terminal Others Terminal Outline Drawing ʲ)84".&ʳ MOUNTING (B) MOUNTING (A) MOUNTING (C), (D) Ta (°C) LOAD (%) Output Derating

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board )84 -5/ME HWS150A -12/ME HWS150A -15/ME HWS150A -24/ME HWS150A -48/ME Input Input Voltage Range (*2) V AC85 - 265 (47 - 63Hz) or DC120 - 370 Power Factor(100/200VAC) (typ) (*1) 0.98/0.93 Efﬁciency(100VAC) (typ) (*1) % 8 58 58 68 88 9 Efﬁciency(200VAC) (typ) (*1) %8 7 8 8 8 9 9 0 9 1 Input Current (100/200VAC) (typ) (*1) A 1.9/0.95 Inrush Current (100/200VAC) (typ) (*1)(*3) A 14/28 (Ta = 25 ˆ, Cold Start) Leakage Current (*9) mA Less than 0.5 (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC) Output Nominal Output Voltage VDC 51 2 1 5 2 4 4 8 Maximum Output Current A 30 13 10 6.5 3.3 Maximum Line Regulation (*5) mV 20 48 60 96 192 Maximum Load Regulation (*6) mV 40 96 120 150 240 Temperature Coefﬁcient Less than 0.02% / ˆ Maximum Ripple & Noise(0ʽTaʽ70ˆ) (*4) mV 120 150 150 150 200 Maximum Ripple & Noise(-10ʽTa<0ˆ) (*4) mV 160 180 180 180 240 Hold-up Time (typ) (*1) ms 20 Function Remote Sensing Possible Parallel Operation - Series Operation Possible Line DIP Designed to meet SEMI-F47 ʢ200VAC Line onlyʣ Environment Operating Temperature (*10) ˆ -10 to +70 (-10 to +50ˆ:100%, +60ˆ:60%, +70ˆ:20%) Storage Temperature ˆ -30 to +85 Operating Humidity ˋRH 30 - 90 ʢNo Condensing ʣ Storage Humidity ˋRH 10 - 95 ʢNo Condensing ʣ Vibration At no operating, 10-55Hz ʢSweep for 1minʣ 19.6m/s Constant, X,Y,Z 1hour each. Shock Less than 196.1m/s Cooling Convection Cooling Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Ou tput : 3kVAC (20mA) Output - FG : 500VAC (20mA) for 1min Isolation Resistance More than 100M Њ at 25ˆ and 70%RH Output - FG : 500VDC Standards Safety (*11) Approved by ES60601-1, EN60601-1, CSA-C22.2 No.60601-1 PFHC Designed to meet IEC61000-3-2 Voltage Fluctuations / Flicker Emissions Designed to meet IEC61000-3-3 Conducted Emission, Radiated Emission (*12) Designed to meet EN55011/EN55022-B, FCC-B, VCCI -B Immunity (*12) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11 Mechanical Weight (typ) g 470 Size (W x H x D) mm 37 x 82 x 160 ʢRefer to Outline Drawing ʣ HWS150A/ME SPECIFICATIONS (Read instruction manual carefully, before using the power supply unit.) HWS150A/ME (*1) At 100VAC/200VAC, Ta=25˃C, nominal output voltage and maximum output power. (*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50 - 60Hz). (*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms. (*4) Measure with JEITA RC-9131B probe, Bandwidth of scope :100MHz. (*5) 85 - 265VAC, constant load. (*6) No load-Full load, constant input voltage. (*7) Constant current limit and hiccup with automatic recovery. Avoid to operate at over load or short circuit condition. (*8) OVP circuit will shut down output, manual reset (Re power on). (*9) Measured by the each measuring method of UL, EN, and CSA (at 60Hz),Ta = 25 ˆ (*10) Output Derating - Refer to Output Derating Curve. - Load (%) is percent of maximum o utput power or maximum output current, do not exceed its derating of maximum load. (*11) It is the third edition, authorization in MOOP of ES60601-1, EN60601-1, CSA-C22.2 No. 60,601-1. (*12) The power supply is considered a component which will be installed into a ﬁnal equipment. The ﬁnal equipment should be re-evaluated that it meets EMC directives. Please refer to "TDK-Lambda EMC Filters" catalog. ˔Recommended EMC Filter RSEN-2003D or RSEN-2003

B@)84"@ HWS-A/ME ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS HWS150A/ME MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D DON’T USE VOLTAGE ADJUSTMENT 2-M3 EMBOSSED, TAPPED AND COUNTERSUCK HOLES SCREW PENETRATION DEPTH MAX. 6mm 2-M3 TAPPED HOLES SCREW PENETRATION DEPTH MAX. 6mmLED (GREEN) (14.6) 37±1 (17) 135±0.5 8 19MAX 160±1 (6.1) 17 18.5 (15) 131±0.5 8 68±0.5 82±1 (75) (10.7) (9) 8.4 7.3 9.2 10 8.6 7-M3.5 AC(N) AC(L) FG NAME PLATE [unit: mm] Qty(max) 2 pcs 1 pcs 2 pcs t(max) 0.8mm 1.0mm 0.8mm D(max) 8.1mm 6.8mm Recommended Solderless Terminal Others Terminal Outline Drawing ʲ)84".&ʳ Ta (°C) LOAD (%) MOUNTING (B) MOUNTING (A) MOUNTING (C), (D) Output Derating

B@)84"@

B@)84"@ HWS-A HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board Block Diagram ʲ)84" )84"ʳ ʲ)84"ʳ ʲ)84")84"ʳ Line Filter Rectifier Circuit Filter Circuit Switching Circuit Rectifier & Filter Control Circuit Control Circuit OCP Circuit OVP Circuit Photo- Coupler Photo- Coupler Photo- Coupler OVP Sensing Output Sensing OutputInput 85 -265VAC Inrush Current Limit Circuit PFHC Circuit Remote ON/OFF Control ˞0QUJPO Line Filter Rectifier Circuit Filter Circuit Switching Circuit Rectifier & Filter OutputInput 85 -265VAC Inrush Current Limit Circuit PFHC Circuit Control Circuit Control Circuit OCP Circuit OVP Circuit Photo- Coupler Photo- Coupler Photo- Coupler OVP Sensing Output Sensing Remote ON/OFF Control µ Fuse ratingjµ Circuit topology, swtching frequency HWS15A-50A: Flyback topology 100kHz (fixed) HWS80A-150A: Cascade forward topology 120kHz (fixed) PFHC circuitjactive filter 65kHz (fixed) HWS15A: 2A HWS30A-100A: 3.15A HWS150A: 5A ˞0QUJPO Line Filter Rectifier Circuit Filter Circuit Switching Circuit Rectifier & Filter Control Circuit OCP Circuit OVP Circuit Photo- Coupler Photo- Coupler OVP Sensing Output Sensing OutputInput 85 -265VAC Inrush Current Limit Circuit

B@)84"@ HWS-A HWS-A ɾAll specifications are subject to change without notice. UNITɾ PC Board ʲ)84" )84"ʳ ʲ)84")84"ʳ Sequence Time Chart INPUT ON OVP ACT ON OCP ACT ON INPUT OFF INPUT ON Input Voltage Output Voltage OVP Point(∗1) OCP RESET INPUT OFF (∗1) OVP Point 3V : 125 - 150% 5 - 48V : 125 - 145% INPUT ON OCP ACT ON OVP ACT ON INPUT OFF INPUT ON Input Voltage Output Voltage OVP Point(∗1) Remote ON/OFF Control(∗2) REMOTE OFF REMOTE ON OCP RESET INPUT OFF (∗1) OVP Point 3V : 125 - 150% 5 - 48V : 125 - 145% (∗2) +R & -R level 4.5V or higher : ON 0.8V or less: OFF

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS15A, 30A, 50A, 80A, 100A, 150AɹInstruction Manual Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product. Incorrect usage could lead to an electrical shock, damage to the unit or a ﬁre hazard. %"/(&3 Never use this product in locations where ﬂammable gas or ignitable substances are present. There are risks of igniting these substances and exploding by an arcing. 8"3/*/( ˔ Do not touch this product or its internal components while circuit is live, or shortly after shutdown. There may be high voltage or high temperature present and you may receive an electric shock or burn. ˔ While this product is operating, keep your hands and face away from it as you may be injured by an unexpected situation. ˔ Do not make unauthorized changes to this product, otherwise you may rec eive an electric shock and void your warranty. ˔ Do not drop or insert anything into this product. It might cause a failure, ﬁre and electric shock. ˔ Do not use this product under unusual condition such as emission of smoke or abnormal smell and sound etc. It might lead to ﬁre and electric shock. In such cases, please contact us. Do not attempt repair by yourself, as it is dangerous for the user. ˔ Do not operate these products in the presence of condensation. It might lead ﬁre and electric shock. $"65*0/ ˔ This power supply is designed and manufactured for use within an end product such that it is accessible to SERVICE ENGINEERS only. ˔ Conﬁrm connections to input/output terminals and signal terminal are correct as indicated in the instruction manual before switching on. ˔ Input voltage, Output current, Output power, ambient temperature and ambient humidity should be kept within speciﬁcations, other wise the product will be damaged. ˔ Do not operate and store this product in an environment where condensation might occur. In such case, waterproof treatment is necessary. ˔ Do not use this product in environment with a strong electromagnetic ﬁeld, corrosive gas or conductive substances. ˔ For applications, which require very high reliability (Nuclear related equipment, medical equipment, trafﬁc con trol equipment, etc.), it is necessary to provide a fail-safe mechanism in the end equipment. ˔ Do not inject abnormal voltages into the output or signal of this product. The injection of reverse voltage or over voltage exceeding nominal output voltage into the output or signal terminals might cause damage to internal components. ˔ Never operate the product under over current or short- circuit condit ions, or outside its speciﬁed Input Voltage Range. Insulation failure, smoking, burning or other damage may occur. ˔ This product contains a printed circuit board utilizing surface mounted devices. PCB stress such as bending, twisting etc. could cause damage. Therefore, please handle with care. ˔ This power supply has possibility that hazardous voltage may occur in output terminal depending on fail ure mode. The output of these products must be protected in the end use equipment to maintain SELV. ˔ The information in this document is subject to change without prior notice. Please refer to the latest version of the data sheet, etc., for the most up-to date speciﬁcations of the product. ˔ No part of this document may be copied or reproduced in any form without prior written consent of TDK-Lambda . /PUFTGPS)84".& /05&4 ˔ The product should be completely enclosed in the application according to the speciﬁcations, and contact to the I/O part with the patient be limited. Be careful when designing the outline. Please refer to section 16, IEC/EN/UL60601-1. ˔ This product is not suitable for the use of the combustible narcotic that oxygen or the nitrous oxide mixed. ˔ The signal port connects only the device that suits IEC/EN/ UL60601-1. ˔ It is necessary to fuse it in two poles of the main power supply in the overall equipment into which this product is built excluding the permanent installation type equipment deﬁ ned by IEC/EN/UL60601-1 section 57.6. The fuse is installed in the monopole of the input of this product (live line). ˔ Between I/O of this product is evaluated as the basic insulation by IEC/EN/UL60601-1. Please add further insulation for safe contact to the output part. ˔ This product is compatible with MOOP (operator protection means). It does not correspond to patient protection means (MOPP). ˔ If you want to include this product in medical equipment, it must be ﬁtted with a device to disconnect the input to the two poles of this product. ˔ Please refer to local regulations for the disposal of t he product that passes the life. Note : CE MARKING CE Marking when applied to a product covered by this handbook indicates compliance with the low voltage directive (2006/95/EC) in that it complies with EN60950-1. BEFORE USING THE POWER SUPPLY UNIT HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board .PEFMOBNFJEFOUJGJDBUJPONFUIPE )84"r˘ Output Power type Series Name Rated Output Voltage Option (*1) (*1) Blankɿ Open frame type. (Standard) /A ɿ With cover type /R ɿ Open frame type with remote ON/OFF control model.(*2) /RA ɿ Remote ON/OFF control,with cover.(*2) /ADIN ɿ DIN rail mountable (Only cover type of 24V) /B ɿ Connector type.(*2) (100A,150A : Only 12-48V output model) (*2) Option of HWS50A,80A,100A,150A 5FSNJOBM&YQMBOBUJPO )84" )84" )84" /g3/g3 ᶃ +V : + Output terminal (15A max. / terminal) ᶄ rV : –Output terminal (15A max. / terminal) ᶅ FG : Frame Ground ᶆ L : Input terminal Live line (Fuse in line) ᶇ N : Input terminal Neutral line ᶈ Output voltage adjustment trimmer ᶉ Output monitoring indicator (Green LED) /g13 All screws size is M3.5 )84"3 3"Include ᶊ rR : Remote ON/OFF control ᶋ +R : Remote ON/OFF control /g13/g3Connector (JST) for Remote ON/OFF control Connector Housing Terminal Pin B2B-XH-AM XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 Hand Crimping Tool : YC-110R (JST) or YRS-110 (JST) Use recommended crimping tool. Matching housing and terminal pin Not included with the product. )84"# 㻔㻕㻖㻗㻘 ᶃ +V : + Output terminal (5A max. / pin) ᶄ rV : rOutput terminal (5A max. / pin) ᶅ FG : Frame Ground ᶆ L : Input connector Live line (Fuse in line) ᶇ N : Input connector Neutral line /g13/g3Connector (JST) for CN1,CN51 Connector Housing Terminal Pin CN1 : Input connector B3P5-VH(LF)(SN) VHR-5N BVH-21T-P1.1 or SVH-21T-P1.1CN51 : Output connector B4P-VH(LF)(SN) VHR-4N The recommended wire type : AWG18-22 Note: Up to 3A/pin : AWG18-22 Up to 5A/pin : AWG18-20 Hand Crimping Tool : YC-160R (JST) Use recommended crimping tool. Matching housing and terminal pin Not included with the product. HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board )84" )84" )84" ᶃ +V : + Output terminal (30A max. / terminal) ᶄ rV : rOutput terminal (30A max. / terminal) ᶅ FG : Frame Ground ᶆ L : Input terminal Live line (Fuse in line) ᶇ N : Input terminal Neutral line ᶈ +S : + Remote sensing terminal ᶉ rS : rRemote sensing terminal ᶊ Output voltage adjustment trimmer ᶋ Output monitoring indicator (Green LED) /g13/g3All screws size is M3.5 )84"3 )84"3 )84"3 3"*ODMVEF ᶌ rR : Remote ON/OFF control ᶍ +R : Remote ON/OFF control /g13/g3Connector (JST) for Remote ON/OFF control Connector Housing Terminal Pin B2B-XH-AM XHP-2 BXH-001T-P0.6 orSXH-001T-P0.6 Hand Crimping Tool : YC-110R (JST) or YRS-110 (JST) Use recommended crimping tool. Matching housing and terminal pin Not included with the product. )84"# )84"# )84"# 㻖㻗㻘㻔㻕 ᶃ +V : + Output terminal (5A max. / pin) ᶄ rV : r Output terminal (5A max. / pin) ᶅ FG : Frame Ground ᶆ L : Input connector Live line (Fuse in line) ᶇ N : Input connector Neutral line * Connector (JST) for CN1,CN51 Connector Housing Terminal Pin CN1 : Input connector B3P5-VH(LF)(SN) VHR-5N BVH-21T-P1.1 or SVH-21T-P1.1CN51 : Output connector B6P-VH(LF)(SN) VHR-6N The recommended wire type : AWG18-22 Note: Up to 3A/pin : AWG18-22 Up to 5A/pin : AWG18-20 Hand Crimping Tool : YC-160R (JST) Use recommended crimping tool. Matching housing and terminal pin Not included with the product. HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS15A, HWS30A, HWS50A Load HWS80A, HWS100A, HWS150Aɹ ɾ Basic connection (Local sensing) Connect ʠ+Sʡ terminal to ʠ+Vʡ terminal, and ʠrSʡ terminal to ʠrVʡ terminal with the attached short pieces . (Short pieces are mounted at time of shipment.) Load ɾRemote sensing connection Connect ʠ+Sʡ terminal to ʠ+ʡ terminal of load, and ʠ–Sʡ terminal to ʠ–ʡ terminal of load with wires. If remote sensing terminals are opened, the output will rise and OVP may be triggered. Load Recommended torque : HWS15A - HWS150A M3.5 screw 1.0Nŋm(10.2kgfŋcm) - 1.6Nŋm(16.3kgfŋcm) Pay attention to the input wiring. If it is connected to wrong terminal, the power supply will be damaged. ɾ Input must be off when making connections. ɾ Connect FG terminal to earth (frame ground of the equipmen t etc.) by thick wire for safety and improvement of noise sensitivity. $POOFDUJOHNFUIPE HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board &YQMBOBUJPOPG'VODUJPOTBOE1SFDBVUJPOT ⬟. Input Voltage Range Input voltage range is single phase 85-265VAC(47-63Hz) or 20-370VDC. Input voltage, which is out of speciﬁcation, might lead unit damage. For cases where conformance to various safeties required, described as 100-240VAC (50-60Hz). Note : HWS-A series is able to withstand input of 300VAC for 5 seconds (No damage). Please note that to satisfy the electrical characteristics, the input voltage range must be within 85-265VAC ⬡Output Voltage Range Output voltage is set the rated value at shipment. V.ADJ trimmer can adjust the output voltage within the range. Output voltage range is within +/– 20% (3.3V : +20%/–10%, 48V : +10%/–20%) of nominal output voltage. To turn the trimmer clockwise, the output voltage will beincreased. Take note when the output voltage is increased excessively, over voltage protection (OVP) function may trigger and voltage will be shut down. Furthermore, when increasing the output voltage reduce the output current so as not to exceed the maximum output power. ⬣Inrush Current This series equipped Power thermistor to limit the inrush current. This series are Power thermistor method so that higher current will ﬂow at higher ambient temperature or re- input condition. Please select input switch and fuse carefully with the high temperature and re-input the power condition. The inrush current value is under cold start at 25 ˆ in the specification. ⬥Over Voltage Protection (OVP) The OVP function (Inverter shut down method, manual reset type) is provided. OVP function operates within 3.3V: 125% - 150%, 5-24V: 125% - 145%, 48V: 115%-135% of nominal output voltage. When OVP triggers, the output will be shut down. To reset OVP, remove the input of power supply for a few minutes, and then re-input. In addition, the setting value of OVP is ﬁxed and not adjustable. Pay attention not to apply higher voltage externally to the output terminal to avoid unit failure. In case of inductive load, put protective diode in series to the output power line. ⬧Over Current Protection (OCP) HWS15A, HWS30A, HWS50A : Fold back limit and Hiccup mode with automatic recovery. HWS80A, HWS100A, HWS150A : Constant current limit and Hiccup with automatic recovery. OCP function operates when the output current exceeds 105% of maximum DC output current of specification. The outputs will be automatically recovered when the overload condition is canceled. Never operate the unit un der over current or shorted conditions, which may leads damage. OCP setting is fixed and not to be adjusted externally. ⬩Remote Sensing (+S, –S terminal) (For HWS80A, HWS100A, HWS150A) This function compensates voltage drop of wiring from output terminals to load terminals. Connect ʠ+Sʡ terminal to ʠ+ʡ terminal of load and ʠ–Sʡ terminal to ʠ–ʡ terminal of load with sensing wires. The total line voltage drop (+ side line and – side line) shall be less than 0.3V. In case that sensing line is too long, it is necessary to put an electrolytic capacitor in following 3 placed; 1) Across the load terminal, 2) Between ʠ+Sʡ terminal and ʠ+Vʡ terminal, 3) Between ʠ–Sʡ terminal and ʠ–Vʡ terminal. If remote sensing terminal is opened, the output will rise and OVP may be triggered. Power Supply Load ⬫Output Ripple & Noise The standard speciﬁcation for maximum ripple value is measured according to measurement circuit speciﬁed by JEITA RC-9131B. When load lines are longer, ripple will becomes larger. In this case, electrolytic capacitor, ﬁlm capacitor, etc. might be necessary to use across the load terminal. The output ripple cannot be measure accurately if the probe ground lead of oscilloscope is too long. Power Supply Oscilloscope Load R:50Ω C:4700pF R C 100MHz Coaxial Cable 1.5m 50Ω HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board ⬭Series Operation For series operation, either method ( A ) or ( B ) is possible. ( A ) Power Supply Power Supply Load 㸩㸫 Note : In case of (A).please connect bypass diodes to prevent reverse voltage. Please select a bypass diode with maximum forward current rating more than output load current. And maximum reveres voltage must withstand each power supply output voltage. *Series operation for HWS80A, HWS100A, HWS150A possible without bypass diode. Never use when one of the unit not operate, which may leads damage. ( B ) Power Supply Power Supply Load Load 㸩㸩㸫㸫 ⬯Parallel Operation (A) Operation to increase the Output Current is not possible. (B) Operation as a Backup Power Supply is possible as follows. 1. Set the power supply output voltage higher by the amount of forward voltage drop ( VF ) of the diode. 2. Please adjust the output voltage of each power supply to be the same. 3. Please use within the speciﬁcations for output voltage and output power. 4. Plea se select a reverse current prevention diode with maximum forward current rating more than output load current. ( A ) Power Supply Power Supply Load 㸩㸫 ( B ) Power Supply Power Supply Load 㸩㸫 ⵌIsolation Test Isolation resistance between Output . FG terminal is more than 100MЊat 500VDC. For safety operation, voltage setting of DC isolation tester must be done before the test. Ensure that the unit is fully discharged after the test. ˙Output - FG terminal : 500VDC More than 100M Њ ( A )HWS15A,HWS30A AC(L) AC(N) +V FG Isolation Tester ( B )HWS50A AC(L) AC(N) +V FG Isolation Tester ( C )HWS80A,HWS100A,HWS150A AC(L) AC(N) +V FG Isolation Tester HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board ˙Input - FG (solid line) : 2.0kVAC, 1min (20mA) Input - Output (dotted line) : 3.0kVAC, 1min (20mA) ( A )HWS15A, HWS30A AC(L) AC(N) +V FG Withstand Voltage Tester ( B )HWS50A AC(L) AC(N) +V FG Withstand Voltage Tester ( C )HWS80A, HWS100A, HWS150A AC(L) AC(N) +V FG Withstand Voltage Tester ˙Output - FG : 500VAC, 1min (20mA) ( A )HWS15A, HWS30A AC(L) AC(N) +V FG Withstand Voltage Tester ( B )HWS50A AC(L) AC(N) +V FG -RWithstand Voltage Tester ( C )HWS80A, HWS100A, HWS150A AC(L) AC(N) +V FG -RWithstand Voltage Tester ⵍ. Withstand Voltage This series is designed to withstand 3.0kVAC between input and output, 2.0kVAC between input and FG and 500VAC between output and FG each for 1 minute. When testing withstand voltage, set current limit of withstand voltage test equipment at 20mA. The applied voltage must be gradually increased from zero to testing value and then gradually decreased for shut down. When timer is used, the power supply may be damaged by high impulse voltage at timer switch on and off. Connect input and output as follows. Note1 : This product have monolithic ceramic capacitor in secondary circuit to frame ground. Some of the withstand voltage tester may generate high voltage at the matching with monolithic ceramic capacitor and may cause the unit damage. So, please check the waveform of test vo ltage. Note2 : In case of using external noise ﬁlter, capacitance between ʠInput and FGʡ might be increased. When testing withstand voltage between ʠInput and Outputʡ, there is a possibility exceeding withstand voltage between ʠOutput and FGʡ (500VAC). Please check the voltage between ʠOutput and FGʡ. If the voltage exceeding withstand voltage, please add external capacitor to ʠOutput and FGʡ. It can decrease the voltage. On the other hand, no need to check the voltage in case of ʠOutput and FGʡ is shorted. /g3 FG AC(L) AC(N) /g3 AC(L) AC(N) FG Withstand Voltage Tester External capacitor adding point or short point. Even in the case of "+V and FG", There is a similar effect. The example of noise filter circuit that may increasing capacitance value between "Input and FG" (Capacitance value in dashed line is added.) Power SupplyNoise filter HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board ⵎRemote ON/OFF Control ( HWS50A-150A Option) Remote ON/OFF control function is available as option with model name followed by /R. Using this function allows the user to turn the output on and off without having to turn the AC input off and on. It is controlled by the voltage applied to +R and –R. This circuit is in the Secondary side of the power supply unit. Do not connect in the primary side of power supply unit. And this circuit is isolated from the output of power supply unit. E Power Supply 1kΩ SW R R : External resistance E : External voltage +R & –R terminal condition SW ON (Higher than 4.5V) SW OFF (Lower than 0.8V) Ouput condition ON OFF External voltage : E 4.5 ~ 12.5VDC 12.5 ~ 24.5VDC External resistance : R No required 1.5kΩ HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board .PVOUJOH.FUIPE ⬟Mounting Method (1) This is convection cooling type power supply. In the consideration for the heat radiation and safety. Please take a distance more than 15mm between the power supply and the peripheral parts. When lining up multiple units, please make sure to place them 15mm or more apart from each other. (2) Please take insulation distance (space) more than 5mm for the component side at the open frame type. (3) The maximum allowable penetration of mounting screws is 6mm. (4) Recommended torque for mounting screw HWS15A-150A (M3 screw) : 0.49N ɾm ( 5.0 kgfɾcm ) Air flow Sheet Metal 15mm or more Provide punching, etc. to allow air to pass. 15mm or more Component side More than 5mm of insulation distance (space) ⬡Output Derating according to the Mounting Directions Recommend standard mounting is direction ( A ). Direction ( B ), ( C ) and ( D ) are also possible. For other mounting directions, please inquire to TDK-Lambda. Refer to the derating below. Please do not use mounting direction ( E ), where the PCB will be on the topside and heat will be trapped inside the unit. Load (%) is percent of maximum outpu t power or maximum output current, do not exceed its derating of maximum load. ˙Mounting direction Standard Mounting (A) (B) (C) (D) (E) Not Possible ˙Output Derating HWS15A Mounting (A),(B),(C),(D) Ta (°C) LOAD (%) Load (%) Mounting (A),(B),(C),(D) 100 Ta(Υ) -10㹼50 HWS30A Mounting (A),(B),(C),(D) Ta (°C) LOAD (%) -10㹼+50 100 60 60 70 40 Load (%) Mounting (A),(B),(C),(D) Ta(Υ) HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS50A (Include option model /R, /B) Mounting (A) Mounting (B),(D) Mounting (C) Ta (°C) LOAD (%) Load (%) Mounting (A) Mounting (B),(D) Mounting (C) -10㹼+45 100 100 100 50 100 100 86 60 70 65 58 70 40 30 30 Ta(Υ) HWS80A (Include option model /R, /B) Mounting (A) Mounting (B) Mounting (C),(D) Ta (°C) LOAD (%) 100 100 100 100 100 -10㹼+45 Load (%) Mounting (A) Mounting (B),(D) Mounting (C) Ta(Υ) HWS100A (Include option model /R, /B) Mounting (A) Mounting (B) Mounting (C),(D) Ta (°C) LOAD (%) 100 100 100 50 100 80 80 60 65 60 60 70 30 30 20 -10㹼+40 Load (%) Mounting (A) Mounting (B) Mounting (C),(D) Ta(Υ) HWS150A (Include option model /R, /B) Mounting (A) Mounting (B) Mounting (C),(D) Ta (°C) LOAD (%) 100 100 100 40 100 100 90 50 100 80 80 60 60 60 60 70 20 20 20 -10㹼+30 Load (%) Mounting (A) Mounting (B) Mounting (C),(D) Ta(Υ) HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS15A/A (Include option model /ADIN) Mounting (A) Mounting (B),(C),(D) Ta (°C) LOAD (%) (With cover type) -10ʙ+40 100 100 100 Load (%) Mounting (A) Mounting (B),(C),(D) Ta(Υ) HWS30A/A (Include option model /ADIN) Mounting (A) Mounting (B),(C),(D) Ta (°C) LOAD (%) (With cover type) 100 100 100 -10ʙ+40 Load (%) Mounting (A) Mounting (B),(C),(D) Ta(Υ) HWS50A/A (Include option model /RA,/ADIN) Mounting (A) Mounting (B),(D) Mounting (C) Ta (°C) LOAD (%) (With cover type) 100 100 100 100 -10㹼+40 Load (%) Mounting (A) Mounting (B),(D) Mounting (C) Ta(Υ) HWS80A/A (Include option model /RA,/ADIN) Mounting (A) Mounting (B),(D) Mounting (C) Ta (°C) LOAD (%) (With cover type) -10㹼+45 Load (%) 100 100 Mounting (A) 100 Mounting (B),(D) 100 Mounting (C) Ta(Υ) HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board HWS100A/A (Include option model /RA,/ADIN) Mounting (A) Mounting (B) Mounting (D) Mounting (C) Ta (°C) LOAD (%) (With cover type) ∗ Refer to dotted line for output derating curve, when input voltage range is "85VACʽVin<90VAC" for the Mounting (A). Load (%) 100 100 100 Mounting (A) 100 100 Mounting (B) 100 Mounting (C) 100 100 Mounting (D) -10㹼+30 Ta(Υ) HWS150A/A (Include option model /RA,/ADIN) Mounting (A) Mounting (B), (C), (D) Ta (°C) LOAD (%) (With cover type) ∗ Refer to dotted line for output derating curve, when input voltage range is "85VACʽVin<90VAC" for the Mounting (A). 100 100 100 Load (%) Mounting (A) Mounting (B),(C),(D) -10㹼+30 Ta(Υ) HWS-A

B@)84"@ HWS-A औѻઆ໌ ɾAll specifications are subject to change without notice. UNITɾ PC Board ̒8JSJOH.FUIPE (1) The output load line and input line shall be separated, and use all lines as thick and short as possible to make lower impe dance. The output load line and input line shall be twiste d or use shielded wire to improve noise sensitivity. (2) Remote sensing lines and remote ON/OFF control lines shall be twisted or use shielded wire, and separated from the output lines. (3) Noise can be eliminated by attaching a capacitor to the load terminals. (4) The recommended wire type, torque and crimp-type terminal : MODEL Recommended Wire Recommended torque Recommended crimp-type terminal D (MAX) t (MAX) Mounting piecs (MAX) HWS15A-50A AWG14-22 All terminal M3.5 Screws HWS80A HWS100A AWG12-22 Output terminal M3.5 Screws 1.0mm 1piece 0.8mm 2piece AWG14-22 Other terminal M3.5 Screws HWS150A AWG10-22 Output terminal M3.5 Screws 1.0mm 1piece 0.8mm 2piece AWG14-22 Other terminal M3.5 Screws Note 1 : When using separate loads, use of two pcs. of 0.8mm thick crimp-type terminal is recommended. Note 2 : For recommended diameter, refer to wire maker recommended allowable current and voltage drop. Especially, for 3V or 5V models, output current is large. Thick diameter wire is recommended. HWS-A

a_HWS-A_50 HWS-A 取扱説明・All specifications are subject to change without notice. UNIT・ PC Board 7. The life expectancy The life of the power supply depends on the life of the built- in aluminum electrolytic capacitor. The life is described in reliability data. The life of the aluminum electrolytic capacitor varies depending on the method of mounting the power supply, the load current, and the ambient temperature. Please refer to “Electrolytic Capacitor Lifetime”. Please do not use the product which passed over the life expectancy. There is a risk of unexpected output shutdown and speciﬁcations may not be satisﬁed. Please contact us for maintenance or exchange the product which passed over the life expectancy. ９. Before concluding that the unit is at fault… Before concluding that the unit is at fault, make the following checks. (1) Check if the rated input voltage is connected. (2) Check if the wiring of input and output is correct. (3) Check if the wire size is not too thin. (4) Check if the output voltage control (V.ADJ) is properly adjusted. (5) Check if the remote sensing terminal is not opened. The output will rise and OVP may be triggered. (6) Check if the output current and output power does not over speciﬁcation. Maximum external capacitance MODEL 3.3V 5V 12V 15V 24V 48V HWS15A 10,000uF 5,000uF 2,000uF 1,000uF 500uF HWS30A,HWS50A 10,000uF 5,000uF 2,000uF 500uF HWS80A,HWS100A,HWS150A 10,000uF 5,000uF 1,000uF (7) Audible noise can be heard when input voltage waveform is not sinusoidal wave. (8) Audible noise can be heard during Dynamic-Load operation. (9) Ensure that a large capacitor is not connected on the output side. Please use within maximum capacitance shown below. If connecting more than the following capacity,conditioning is needed.Please contact us for details 8. External Fuse Rating Refer to the following fuse rating when selecting the external input fuse. Surge current ﬂows when input turn on. Use slow-blow fuse or time-lug fuse.Fast-blow fuse can not be used. Fuse rating is speciﬁed by inrush current value at input turn on. Do not select the fuse according to actual input current (rms.) values. HWS15A ： 2A HWS30A-100A ： 3.15A HWS150A ： 5A 10. Warranty Period This product is warranted for a period of 5 years from the date of shipment. For damages occurring at normal operation within this warranty period, repair is free of charge. Please read the General Safety Instruction before using the products. HWS-A

a_HWS-A_51

a_HWS-A_52

a_HWS-A_53

a_HWS-A_54

a_HWS-A_55

)84"@& Please see the Web of relevant companies for latest updates. *1. Note that the contents of this catalog may be changed without prior warning. Be sure to read catalogs and instruction manuals for each product before using them. For accuracy purposes, please ask for specifications, and check contents. *2. All included company names, products names and service marks, etc., are the trademarks or registered trademarks of TDK, TDK-Lambda or their subsidiaries in Japan and other countries. Note that the registered mark ® or TM are not used in this material, excluding one section. *3. The TDK logo is the registered trademark of TDK Corporation. 3-9-1 , Shibaura , Minato-ku , Tokyo 108-0023 , Japan TDK-Lambda Corporationhttp://www.tdk-lambda.com/ Catalog Usage Precaution s Please observe the following points when using this catalog for power supplies and related products of TDK-Lambda Corporation (hereafter referred to simply as "our products"). Be sure to carefully read all precautions stated below before beginning to use our products. ̍ɽThe contents of this catalog are subject to change without notice, for example related to product improvements and other instances. Always check the latest information before deciding on a product. ̎ɽOur products are designed and manufactured under the assumption that they will be used as integrated power supplies for normal industrial applications. They are not designed and manufactured for use in high-safety applications (applications requiring very high reliability and safety levels, where a reliability or safety problem could directly involve the risk of serious injury or death). If the customer decides to use our products in a high-safety application, appropriate fail-safe design features must be provided (such as incorporating protective circuitry and/or protective equipment in the system, or incorporating redundancy in the system so that a single failure cannot lead to instability). TDK-Lambda Corporation does not assume liability for any claims or damages either by the customer or third parties arising from the use of our products for high-safety applications. ̏ɽWhen designing equipment in which our products are to be used, as well as peripheral circuitry for such equipment, always observe the "Product Usage Precautions" noted in this catalog and/or the product documentation and ensure that maximum ratings, power supply voltage range, operation temperature range and other speciﬁcations are not exceeded. TDK-Lambda Corporation does not assume liability for any claims or damages arising from the use of our products in a way that exceeds speciﬁcations, or from a type of usage indicated as unsuitable for the respective product in this catalog. ̐ɽThe operation outline and usage descriptions given in this catalog are examples. Before actual use of a product, all external factors must be examined carefully in order to ensure appropriate circuit and implementation design. TDK-Lambda Corporation does not assume liability for any claims or damages arising from indirect problems such as EMI or mechanical effects from our products. ̑ɽThe technical information included in this catalog is intended only for the purpose of illustrating representative operation or application of our products. It does not imply any guarantee or granting of license for intellectual property rights or other rights held either by TDK-Lambda Corporation or third parties. TDK-Lambda Corporation does not assume liability for any problems with third parties related to intellectual property rights arising from the use of our products. ̒ɽProducts listed in this catalog may require export permission or authorization in compliance with the Foreign Exchange and Foreign Trade Act. ̓ɽThe contents of this catalog may not be reproduced or copied without permission by TDK-Lambda Corporation. ̔ɽFor any inquiries regarding this catalog, please contact the Sales Department of TDK-Lambda Corporation.

Product Information

HWS80A-12 specifications and overview.

Summary

Single Output 15W 節?150W

Description

Single Output 15W 節?150W

Source title HWS80A-12 Datasheet(PDF) - TDK Electronics

Related Parts

More parts from the same family.

Browse manufacturer