HVR3700003304JA100 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260 HVR25, HVR37 Vishay BCcomponents High Ohmic/High Voltage Metal Film Leaded Resistors A homogenous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps. The resistors are coated with a blue, non-flammable lacquer, which provides electrical, mechanical, and climatic protection.

FEATURES

  • Metal film technology
  • High pulse loading (up to 10 kV) capability
  • Small size (0207/0411)
  • Compatible with lead (Pb)-free and lead containing soldering processes
  • Compliant to RoHS directive 2002/95/EC

APPLICATIONS

  • Power supplies
  • Electronic ballast
  • White goods
  • Television TECHNICAL SPECIFICATIONS DESCRIPTION HVR25 HVR37 Resistance Range 100 kΩ to 10 MΩ 100 kΩ to 10 MΩ 100 kΩ to 10 MΩ 100 kΩ to 10 MΩ Resistance Tolerance ± 5 % E24 series ± 1 % E24/E96 series ± 5 % E24 series ± 1 % E24/E96 series Temperature Coefficient ± 200 ppm/K Climatic Category (LCT/UCT/Days) 55/155/56 Rated Dissipation, P 70 0.25 W 0.5 W Maximum Permissible Voltage Umax. DC 1600 V 3500 V RMS 1150 V 2500 V Basic Specification IEC 60115-1 Stability After: Load (1000 h, P

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com Revision: 02-Dec-09 149 HVR25, HVR37 High Ohmic/High Voltage Metal Film Leaded Resistors Vishay BCcomponents Notes (1) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system (2) Please refer to table PACKAGING, see next page DIMENSIONS PART NUMBER AND PRODUCT DESCRIPTION (1) PART NUMBER: HVR2500001503JA100 MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (2) SPECIAL HVR2500 HVR3700 0 = Neutral 0 = Standard 3 digit value 1 digit multiplier MULTIPLIER 3 = *103 4 = *104 5 = *105 F = ± 1 % J = ± 5 % Up to 2 digits 00 = Standard PRODUCT DESCRIPTION: HVR25 5 % A1 150K HVR25 5 % A1 150K MODEL TOLERANCE PACKAGING (2) RESISTANCE VALUE HVR25 HVR37 ± 1 % ± 5 % 150K = 150 kΩ 4M64 = 4.64 MΩ PACKAGING MODEL TAPING AMMO PACK REEL PIECES CODE PIECES CODE HVR25 Axial, 52 mm

5000 A5 5000 R5

HVR37 Axial, 52 mm 1000 A1 5000 R5 Ø D Ø d A DIMENSIONS - Resistor types, mass and relevant physical dimensions TYPE L1 max. (mm) L2 max. (mm) Dmax. (mm) Ø d (mm) A (mm) MASS (mg) HVR37 10 12 4 0.78 ± 0.05 52.5 ± 1.5 500 25RVH0 0 0 0 1 5 0 3 J A 1 0 0

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260 HVR25, HVR37 Vishay BCcomponents High Ohmic/High Voltage Metal Film Leaded Resistors PRODUCTS WITH RADIAL LEADS (HVR25) Note  Please refer document number 28721 “Packaging” for more detail MARKING The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062, marking codes for resistors and capacitors. Standard values of nominal resistance are taken from the E24 and E24/E96 series for resistors with a tolerance of ± 5 % or ± 1 % respectively. The values of the E24/E96 series are in accordance with IEC 60063. Yellow and grey are used instead of gold and silver because metal particles in the lacquer could affect high-voltage properties. DIMENSIONS - Radial Taping SYMBOL PARAMETER VALUE TOLERANCE UNIT P Pitch of components 12.7 ± 1.0 mm P 0 Feed-hole pitch 12.7 ± 0.2 mm P1 Feed-hole centre to lead at topside at the tape 3.85 ± 0.5 mm P2 Feed-hole center to body center 6.35 ± 1.0 mm F Lead-to-lead distance 4.8 + 0.7/- 0 mm W Tape width 18.0 ± 0.5 mm W 0 Minimum hold down tape width 5.5 - mm H1 Component height 29 Max. mm H0 Lead wire clinch height 16.5 ± 0.5 mm H Height of component from tape center 19.5 ± 1 mm D 0 Feed-hole diameter 4.0 ± 0.2 mm L Maximum length of snipped lead 11.0 - mm L 1 Minimum lead wire (tape portion) shortest lead 2.5 - mm PP2 W D0P1P0 L1L F H

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com Revision: 02-Dec-09 151 HVR25, HVR37 High Ohmic/High Voltage Metal Film Leaded Resistors Vishay BCcomponents FUNCTIONAL PERFORMANCE PULSE LOADING CAPABILITY Note  Maximum allowed peak pulse voltage in accordance with IEC 60065, 14.1.a; 50 discharges from a 1 nF capacitor charged to Umax.; 12 discharges/min Maximum dissipation (Pmax.) in percentage of rated power as a function of ambient temperature (Tamb) HVR25 HVR37 For 5 % tolerance ΔR = ± (4.0 % R + 0.1 Ω) For 1 % tolerance ΔR = ± (2.0 % R + 0.1 Ω) 100 - 55 0 70 155 Ambient temperature amb Power Dissipation P Derating - Standard Operation ϑ 10-2 10-1 100 101 102 (MΩ)R Û max. (kV) 10-2 10-1 100 101 102 (MΩ)R Û max. (kV)

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260 HVR25, HVR37 Vishay BCcomponents High Ohmic/High Voltage Metal Film Leaded Resistors TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with IEC 60115-1, catego ry 55/155/56 (rated temperature range - 55 °C to + 155 °C; damp heat, long term, 56 days) and along the lines of IEC 60068-2-xx test method. The tests are carried out under standard atmospheric conditions according to IEC 60068-1, 5.3 unless otherwise specified. In some instances deviations from IEC recommendations were necessary for our method of specifying. PERFORMANCE IEC 60115-1 CLAUSE IEC 60068-2-xx TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (ΔR) HVR25 HVR37 4.8 - Temperature coefficient Between - 55 °C and + 155 °C ± 200 ppm/K 4.25.1 - Endurance at 70 °C 1000 h; loaded with P 70 or Umax.; 1.5 h ON; 0.5 h OFF for 5 % tolerance ± (5 % R + 0.1 Ω) for 1 % tolerance ± (1.5 % R + 0.1 Ω) 4.24 78 (Cab) Damp heat, steady state 56 days; 40 °C; 90 % to 95 % RH loaded with 0.01 P70 for 5 % tolerance ± (5 % R + 0.1 Ω) for 1 % tolerance ± (1.5 % R + 0.1 Ω)

4.23 Climatic sequence

4.23.2 2 (Ba) Dry heat 16 h, 155 °C 4.23.3 30 (Db) Damp heat, cyclic 24 h; 25 °C to 55 °C 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) Cold 2 h, - 55 °C 4.23.6 30 (Db) Damp heat, (accelerated) remaining cycles 5 days; 25 °C to 55 °C 90 to 100 % RH 4.19 14 (Na) Rapid change of temperature 30 min at LCT; 30 min at UCT; LCT = - 55 °C; UCT = 155 °C; 5 cycles No visual damage ± (1 % R + 0.1 Ω) 4.13 - Short time overload Room temperature; dissipation 6.25 x P70 (voltage not more than 2 x limiting voltage, 10 000 Vmax.); 10 cycles 5 s ON and 45 s OFF for 5 % tolerance ± (2 % R + 0.1 Ω) for 1 % tolerance ± (1 % R + 0.1 Ω) 4.12 - Noise IEC 60195 Max. 5 µV/V Max. 2.5 µV/V

4.16 Robustness of

terminations: No damage ± (1 % R + 0.1 Ω) 4.16.2 21 (Ua1) Tensile all samples Load 10 N; 10 s 4.16.3 21 (Ub) Bending half number of samples Load 5 N; 4 x 90° 4.16.4 21 (Uc) Torsion other half of samples 3 x 360° in opposite direction

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com Revision: 02-Dec-09 153 HVR25, HVR37 High Ohmic/High Voltage Metal Film Leaded Resistors Vishay BCcomponents 12NC INFORMATION FOR HISTORICAL CODING REFERENCE ONLY

  • The resistors have a 12 digit ordering code starting with 2306
  • The next 4 or 5 digits indicate the resistor type and packaging
  • For 5 % tolerance the last 3 digits indicate the resistance value: - The first 2 digits indicate the resistance value - The last digit indicates the resistance decade in accordance with table
  • For 1 % tolerance the last 4 digits indicate the resistance value: - The first 3 digits indicate the resistance value - The last digit indicates the resistance decade in accordance with table Last Digit of 12NC Indicating Resistance Decade 12NC Example HVR25, 150 kΩ, ± 5 %, ammopack 1000 pieces is 2306 241 13154 4.22 6 (Fc) Vibration Frequency 10 Hz to 500 Hz; displacement 1.5 mm or acceleration 10 g; 3 directions; total 6 h (3 x 2 h) 4.17 20 (Ta) Solderability (after ageing) 2 s; 235 °C: Solder bath method; SnPb40 3 s; 245 °C: Solder bath method; SnAg3Cu0.5 Good tinning (≥ 95 % covered); no visible damage 4.18 20 (Tb) Resistance to soldering heat Thermal shock: 10 s; 260 °C; 3 mm from body ± (1 % R + 0.1 Ω) 4.29 45 (XA) Component solvent resistance Isopropyl alcohol No visible damage 4.6.11 - Insulation resistance U = 500 VDC during 1 min, V-block method Rins min. 104 MΩ 4.7 - Voltage proof on insulation URMS = 700 V during 1 min, V-block method No flashover or breakdown PERFORMANCE IEC 60115-1 CLAUSE IEC 60068-2-xx TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (ΔR) HVR25 HVR37 RESISTANCE DECADE (5 %) RESISTANCE DECADE (1 %) LAST DIGIT 100 kΩ to 910 kΩ 100 kΩ to 976 kΩ 4 1 MΩ to 9.1 MΩ 1 MΩ to 9.76 MΩ 5 = 10 MΩ = 10 MΩ 6 12NC - Resistor type and packaging

DESCRIPTION

BANDOLIER IN AMMOPACK BANDOLIER ON REEL TYPE TAPE WIDTH TOLERANCE RADIAL TAPED

1000 UNITS 5000 UNITS 5000 UNITS

4000 UNITS

HVR25 52.5 HVR37 52.5

Document Number: 91000 www.vishay.com Revision: 11-Mar-11 1 Disclaimer Legal Disclaimer Notice Vishay ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in gene ric applications. Such statements are not binding statements about the suitability of products for a partic ular application. It is the customer’s responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. Parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product co uld result in person al injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.