HVC JIANGHAI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • Solid Aluminium Electrolytic Capacitor with Conductive Polymer
  • Very low ESR
  • High Ripple Current
  • Switchmode Power Supplies, Computer, DC/DC Converter
  • Noise Suppression in Smoothing / High-Frequency Circuits Item Characteristics Operating Temperature Range (°C) -55 ~ +105 Voltage Range (V) 2,5 ~ 16 Capacitance Range (µF) 100 ~ 1500 Capacitance Tolerance (20°C, 120Hz) ± 20% Surge Voltage Rated Voltage x 1,15 Leakage Current (µA) The initial specified value or less (20°C, 2min) Dissipation Factor (20°C, 120Hz) The initial specified value or less Equivalent Series Resistance (20°C, 100kHz) The initial specified value or less Temperature Characteristics Z (+105°C) / Z (+20°C) : 0,75 ~ 1,0 Stability at 100kHz Z Z (-55°C) / Z (+20°C) : 1,0 ~ 1,25 Stability at 100kHz Load Life 2000h, Rated voltage applied at 105°C Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value Moisture Resistance 500h, Rated Voltage applied at 60°C, 90~95% RH Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value Surge Voltage Characteristics 1000 cycles at 105°C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change: Dissipation Factor Tan δ: ESR: DC Leakage Current: within ± 20% of the initial measured value ≤150% of initial specified value ≤150% of initial specified value ≤ the initial specified value VDC Code Rated Capacitance Max ESR 20°C, 100kHz Max Ripple Current 105°C, 100kHz Dissipation Factor 20°C, 120Hz Leakage Current Size Ø D x L (V) (µF) (mΩ) (mArms) (µA) (mm) 2,5 680 4 520 0,18 340 8 x 11,8 1 000 5 200 0,18 500 10 x 12,7 1 500 5 440 0,18 750 10 x 12,7 560 4 520 0,18 448 8 x 11,8 1 200 5 440 0,18 960 10 x 12,7 6,3 470 4 210 0,15 595 8 x 11,8 820 5 440 0,15 1 035 10 x 12,7 330 3 950 0,15 660 8 x 11,8 560 5 230 0,15 1 120 10 x 12,7 Ratings for HVC Series Custom products are available on request. CD VZ VZ lower ESR HVC lowest ESR CD VH VH 105°C CD VS BS Polymer Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2

R PT 101 M FF 0611 JExxxxx Technology Terminal Type Rated Voltage Code Series Code Capacitance Code (in µF) Capacitance Tolerance Lead Form Terminal/ Pitch Size Dimension for Specials only EC = Electrolytic Capacitor SMD = V For coding please refer to the pages of ratings CD VS = BS 0,47 = R47 ±20% = M SMD: 4x7 = 0407 Radial = R CD VH = VH 1,0 = 010 ±10% = K Taped = FF Terminal = T2 5x11,5 = 0511 PC = Polymer Capacitor Snap-In = S CD VZ = VZ Radial: 6,3x11,5 = 0611 CD 261 = LK 100 = 101 +50 / -10% = T Long Lead = LL 2,0mm = 20 35x80 = 3580 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 CD 262 = QM 10 000 = 103 Cut 4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY on request: alternative lead forms (axial, 90° - angle, others) 12,5mm = 12 CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4

2 Pin

= P2 CD 294 = BW 6,3mm Pin Length = T6

3 Pin

= P3 CD 295 = BC Soldering Pin = S4

4 Pin

= P4 CD 296 = KC

5 Pin

= P5 CD 297 = BB preferred CD 299 = PG CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Order Code SMD, Radial, Snap-In Technical Specification SMD Type Dimensions Ø DxL 4x5,4 5x5,4 6,3x5,4 6,3x7,7 8x10,5 8x11,8 10x10,5 10x12,7 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 0,5 - 0,8 0,7 - 1,1 in mm Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Taping Dimensions Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Allowable Range of Peak Temperature Size T (°C) t (second) t1 (second) Ø 4 ~ 6,3 250 Ø 8 x 10,5 240 Ø 10 x 10,5 235 Soldering Profile (Aluminium Electrolytic Capacitors) Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2