DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
features
- Superior to RK73 series in maximum working voltage
- Suitable for flow and reflow solderings
- Marking: White three-digit on black protective coat 1J: no marking
- Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC 28 KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.12/16/08 HV73 flat chip resistors for high voltage dimensions and construction Protective Coating Inner Electrode Resistive Film Ceramic Substrate Solder Plating Ni Plating L cc W t d D: ±0.5% F: ±1% G:±2% J: ±5% T: Sn ±0.5%, ±1%: 3 significant figures + 1 multiplier ±2%, ±5%: 2 significant figures + 1 multiplier 1J: 0.1W 2A: 0.125W 2B: 0.25W 2H: 0.5W 3A: 1W TD: 0603, 0805, 1206: 7" 2mm pitch punched paper TDD: 0603, 0805, 1206: 10" paper tape TE: 2010 & 2512: 7" punched plastic TED: 2010 & 2512: 10" punched plastic For further information on packaging, please refer to Appendix A HV73 Type Size Nominal Resistance Resistance Tolerance Termination Material Packaging New Part # 2B TD 1004 FT Type L .012+.008 -.004 (0.3+0.2)-0.1 .016+.008 -.004 (0.4+0.2)-0.1 .02±.004 (0.5±0.1) .024±.004 (0.6±0.1) .016±.008 (0.4±0.2) .02±.012 (0.5±0.3) .063±.008 (1.6±0.2) .126±.008 (3.2±0.2) .049±.004 (1.25±0.1) .079±.008 (2.0±0.2) (0805) (1206) (Inch Size Code) Wc d t Dimensions inches(mm) resistors .016+.008 -.004 (0.4+0.2)-0.1 .024±.004 (0.6±0.1) .02±.012 (0.5±0.3) .098±.008 (2.5±0.2) .197±.008 (5.0±0.2) (2010) .016+.008 -.004 (0.4+0.2)-0.1 .024±.004 (0.6±0.1) .02±.012 (0.5±0.3) .122±.008 (3.1±0.2) .248±.008 (6.3±0.2) (2512) .012±.004 (0.3±0.1) .018±.004 (0.45±0.1) .012±.004 (0.3±0.1) .031±.004 (0.8±0.1) .063±.008 (1.6±0.2) (0603)
ordering information
1733 Reader's Spreads pg1-203:document 1/27/09 4:03 PM Page 26
flat chip resistors for high voltage 29KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.11/07/08 Derating Curve environmental applications% Rated Power 100 -60 -40 0 406 08 01 001 60 Ambient Temperature (°C) -55 120 155 -20 140 PMS 300 neg. Black neg. resistors Absolute Maximum Working Voltage E-24 (F±1%) E-24 (G±2%) E-24 (J±5%) Part Designation Maximum Overload Voltage (D.C.)* Operating Temperature Range Power Rating @ 70°C 100k - 10M 100k - 10M —— 11M - 51M 100k - 10M 400V 800V* 500V 1000V* 11M - 51M ±100 0.125W 0.25W ±200 ±200 Resistance RangeT.C.R. (ppm/°C) Max. -55°C to +155°C E-24 (D±0.5%) 100k - 1M 100k - 10M 100k - 10M 100k - 10M±100 100k - 1M 100k - 10M 100k - 10M 100k - 10M±100 100k - 1M 3A 11M - 20M 11M - 20M 11M - 51M 3000V(*D.C.) 4000V*1W ±200 — 43k - 10M 43k - 10M 43k - 10M±100 43k - 1M Performance Characteristics Parameter Requirement ∆ R Limit Typical Test Method Resistance T.C.R. 25°C +25°C/-55°C and +25°C/+125°C Within regulated tolerance Within specified T.C.R. Overload (Short time) Rated Voltage (D.C.) x 2.5 for 5 seconds±2% ±0.5% Resistance to Solder Heat 260°C ± 5°C, 10 seconds ± 1 second±1% ±0.5% Rapid Change of Temperature -55°C (30 minutes), +125°C (30 minutes), 100 cycles±0.5%, ±1%* ±0.3%, ±0.5%** Moisture Resistance 40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle±2% ±0.75% Endurance at 70°C 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle±2% ±0.75% High Temperature Exposure +155°C, 1000 hours±2% ±0.3% 1J 350V 500V*0.1W ±100** — 10k - 10M 10k - 10M 10k - 10M * AC Voltage Reference: When using for A.C. Voltage, use the peek A.C. Voltage, which should not exceed the Maximum DC Overload Voltage (Max. DC Voltage/√2) ** Cold T.C.R. of 1.1MΩ~ 10MΩis +200x10-6/K applications and ratings Additional environmental applications can also be found at www.koaspeer.com