HSSR-711E

HSSR-7110 BOARDCOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

 Dual marked with device part number and DLA Standard Microcircuit Drawing (SMD)  ac/dc signal and power switching  Compact solid-state bidirectional switch  Manufactured and tested on a MIL-PRF-38534 certified line  QML-38534, Class H and Class E  Hermetically sealed 8-pin, dual-in-line package  Small size and weight  Performance guaranteed over –55°C to +125°C  Connection A 0.8A, 1.0Ω  Connection B 1.6A, 0.25Ω  1500 Vdc withstand test voltage  High transient immunity  5 Amp output surge current

Applications

 Military and space  High reliability systems  Standard 28 Vdc and 48 Vdc load driver  Standard 24 Vac load driver  Aircraft controls  ac/dc electromechanical and solid-state relay replacement  I/O modules  Harsh industrial environments CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation that may be induced by ESD. HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-93140021 90V/1.0Ω, Hermetically Sealed, Power MOSFET Optocoupler Data Sheet

• 2 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Functional Diagrams Functional Diagrams All devices are manufactured and tested on a MIL-PRF-38534 certified line, and Class H and Class E devices are included in the DLA Qualified Manufacturers List, QML-38534 for Hybrid Microcircuits. Each device contains an AlGaAs light-emitting diode optically coupled to a photovoltaic diode stack, which drives two discrete power MOSFETs. The device operates as a solid-state replacement for single-pole, normally open (1 Form A) relay used for general-purpose switching of signals and loads in high reliability applications. The devices feature logic level input control and very low output on-resistance, making them suitable for both ac and dc loads. Connection A, as shown in the Functional Diagrams, allows the device to switch either ac or dc loads. Connection B, with the polarity and pin configuration as shown, allows the device to switch dc loads only. The advantage of Connection B is that the on-resistance is significantly reduced, and the output current capability increases by a factor of two. The devices are convenient replacements for mechanical and solid-state relays where high component reliability with standard footprint lead configuration is desirable. Devices may be purchased with a variety of lead bend and plating options. See Selection Guide – Lead Configuration Options table for details. Standard microcircuit drawing (SMD) parts are available for each package and lead style. The HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, and SMD 5962-9314001, 5962-9314002 are designed to switch loads on 28 Vdc power systems. They meet 80V surge and ±600V spike requirements. CAUTION Maximum Switching Frequency – Care should be taken during repetitive switching of loads so as not to exceed the maximum output current, maximum output power dissipation, maximum case temperature, and maximum junction temperature. CONNECTION A AC/DC CONNECTION NC NC CONNECTION B DC CONNECTION IF V F IO V O NC NC IF V F IO V O TRUTH TABLE INPUT OUTPUT H CLOSED L OPEN Selection Guide – Lead Configuration Options Avago Technologies Part Number and Options Commercial HSSR-7110 MIL-PRF-38534 Class H HSSR-7111 HSSR-7112 MIL-PRF-38534 Class E HSSR-711E Standard Lead Finish a a. Gold Plate lead finish: Maximum gold thickness of leads is <100 μin. Typical is 60 μin to 90 μin. Gold Plate Gold Plate Gold Plate Solder Dippedb b. Solder lead finish: Sn63/Pb37. Option #200 Option -200 Option -200 Butt Joint/Gold Platea Option #100 Option -100 Gull Wing/Solderedb Option #300 Option -300 ASSR-711E-300 Crew Cut/Gold Platea Option #600 Option -600 SMD Part Number Prescript for all below 5962- 5962- 5962- Gold Platea 9314001HPC 9314002HPC 9314001EPC Solder Dippedb 9314001HPA 9314002HPA 9314001EPA Butt Joint/Gold Platea 9314001HYC 9314002HYC Butt Joint/Solderedb 9314001HYA 9314002HYA Gull Wing/Solderedb 9314001HXA 9314002HXA Crew Cut/Gold Platea 9314001HZC 9314002HZC Crew Cut/Solderedb 9314001HZA 9314002HZA

• 3 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Outline Drawing Outline Drawing 8-Pin DIP Through Hole Device Marking Thermal Resistance Maximum Output MOSFET Junction to Case – θJC = 15°C/W ESD Classification 3.81 (0.150 ) MIN. 4.32 (0.170 ) MAX. 10.03 (0.395) 10.29 (0.405) 0.51 (0.020 ) MAX. 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MIN. 1.02 (0.040) 1.52 (0.060) 8.13 (0.320) MAX. 7.36 (0.290) 7.87 (0.310) 0.20 (0.008 ) 0.33 (0.013 ) 7.16 (0.282 ) 7.57 (0.298 ) NOTE: DIMENSIONS IN MILLIMETERS (INCHES). MIL-STD-883, Method 3015 , Class 2 COMPLIANCE INDICATOR,[1] DATE CODE, SUFFIX A QYYWWZ XXXXXX XXXXXXX XXX XXX 50434 COUNTRY OF MFR. AVAGO CAGE CODE[1] AVAGO DESIGNATOR DLA SMD[1] PIN ONE/ ESD IDENT AVAGO P/N DLA SMD[1] [1] QML PARTS ONLY (IF NEEDED) Hermetic Optocoupler Options Note: Dimensions in millimeters (inches). Option Description 100 Surface-mountable hermetic optocoupler wi th leads trimmed for butt joint assembly. This option is available on Commercial, Class H and E product. 200 Lead finish is solder dipped rather than gold plated. This option is available on Commercial, Class H and E product. DLA Drawing (SMD) part numbers contain provisions for lead finish. 300 Surface-mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on Commercial, Class H and E product. This option has solder dipped leads. 600 Surface-mountable hermetic optocoupler wi th leads trimmed for butt joint assembly. This option is available on Commercial, Class H and E product. 1.14 (0.045) 1.40 (0.055) 4.32 (0.170) MAX. 0.51 (0.020) MAX. 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MIN. 7.36 (0.290) 7.87 (0.310) 0.20 (0.008) 0.33 (0.013) 0.51 (0.020) MIN. 4.57 (0.180) MAX. 0.51 (0.020) MAX. 2.29 (0.090) 2.79 (0.110) 1.40 (0.055) 1.65 (0.065) 9.65 (0.380) 9.91 (0.390) 5˚ MAX. 4.57 (0.180) MAX. 0.20 (0.008) 0.33 (0.013) 1.07 (0.042) 1.31 (0.052) 3.81 (0.150) MAX. 1.02 (0.040) TYP. 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MIN. 7.36 (0.290) 7.87 (0.310) 0.20 (0.008) 0.33 (0.013)

• 4 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Absolute Maximum Ratings Absolute Maximum Ratings Recommended Operating Conditions Parameter Symbol Min Max Unit Storage Temperature Range T S –65 +150 °C Operating Ambient Temperature T A –55 +125 °C Junction Temperature T J — +150 °C Operating Case Temperaturea a. Maximum junction to case thermal resistance for the device is 15°C/W, where case temperature, TC, is measured at the center of the package bottom. TC — +145 °C Lead Solder Temperature — 260 for 10 s °C Average Input Current I F —2 0 m A Peak Repetitive Input Current (Pulse Width < 100 ms; duty cycle < 50%) IFPK —4 0 m A Peak Surge Input Current (Pulse Width < 0.2 ms; duty cycle < 0.1%) IFPK surge — 100 mA Reverse Input Voltage V R —5 V Average Output Current (See Figure 2.) Connection A Connection B I O 0.8 1.6 A A Single Shot Output Current (See Figure 3.) Connection A (Pulse width < 10 ms) Connection B (Pulse width < 10 ms) IOPK surge 5.0 10.0 A A Output Voltage Connection A Connection B VO –90 V V Average Output Power Dissipationb (See Figure 4.) b. For rating, see Figure 4. The output power PO rating curve is obtained when the part is handling the maximum average output current IO as shown in Figure 2. — 800 mW Parameter Symbol Min Max Unit Input Current (on)a a. Applies to HSSR-7112 and 5962-9314002Hxx devices only. IF(ON) 52 0 m A Input Current (on)b b. Applies to HSSR-7110, HSSR-7111, HSSR-711E, 596 2-9314001Hxx, and 5962-9314001Exx devices only. IF(ON) 10 20 mA Input Voltage (off) V F(OFF) 00 . 6 V Operating Temperature T A –55 +125 °C

• 5 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Electrical Specifications Electrical Specifications TA = –55°C to +125°C, unless otherwise specified. Parameter Symbol Group A Subgroupa a. Commercial parts receive 100% testing at 25°C (Subgroups 1 and 9). SMD, Class H, and Class E parts receive 100% testing at 25°C, 125°C, and –55°C (subgroups 1 and 9, 2 and 10, 3 and 11, respectively). Test Conditions Min Typ Max Unit Figure Note Output Withstand Voltage |V O(OFF)|1 , 2 , 3 V F = 0.6V, IO = 10 μA 90 110 — V 5 Output On-Resistance Connection A R(ON) 1, 2, 3 I F = 10 mA, IO = 800 mA, (pulse duration ≤ 30 ms) — 0.40 1.0 Ω 6, 7 b, c b. During the pulsed R ON measurement (IO duration <30 ms), ambient (TA) and case temperature (TC) are equal. c. Applies to HSSR-7110, HSSR-7111, HSSR-711E, 5962-9314001Hxx and 5962-9314001Exx devices only. IF = 5 mA, IO = 800 mA, (pulse duration ≤ 30 ms) —— 1 . 0 b, d d. Applies to HSSR-7112 and 5962-9314002Hxx devices only. Output On-Resistance Connection B R(ON) 1, 2, 3 I F = 10 mA, IO = 1.6A, (pulse duration ≤ 30 ms) — 0.12 0.25 Ω 6, 7 b, c IF = 5 mA, IO = 1.6A, (pulse duration ≤ 30 ms) — — 0.25 b, d Output Leakage Current I O(OFF) 1, 2, 3 V F = 0.6V, VO = 90V — 10-4 10 μA 8 Input Forward Voltage V F 1, 2, 3 I F = 10 mA 1.0 1.24 1.7 V 9 c IF = 5 mA — — — d Input Reverse Breakdown Voltage VR 1, 2, 3 I R = 100 μA 5.0 — — V Input-Output Insulation I I-O 1 RH ≤ 65%, t = 5s, VI-O = 1500 Vdc, TA = 25°C —— 1 . 0 μ A e, f e. Device considered a two-terminal device: pins 1 through 4 shorted together and pins 5 through 8 shorted together. f. This is a momentary withstand test, not an operating condition. Turn On Time t ON 9, 10, 11 I F = 10 mA, VDD = 28V, IO = 800 mA — 1.25 6.0 ms 1, 10, 11, 12, c IF = 5 mA, VDD = 28V, IO = 800 mA — — 6.0 d Turn Off Time t OFF 9, 10, 11 I F = 10 mA, VDD = 28V, IO = 800 mA — 0.02 0.25 ms 1, 10, 14, 15 c IF = 5 mA, VDD = 28V, IO = 800 mA — — 0.25 d Output Transient Rejection 9 V PEAK = 50V, CM = 1000 pF , CL = 15 pF, RM ≥ 1 MΩ 1000 — — V/μs 17 Input-Output Transient Rejection 9V DD = 5V, VI-O(PEAK) = 50V, RL = 20 kΩ, CL = 15 pF 500 — — V/μs 18 dVo dVio

• 6 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Typical Characteristics Typical Characteristics All typical values are at TA = 25°C, IF(ON) = 10 mA, VF(OFF) = 0.6V unless otherwise specified. Figure 1 Recommended Input Circuit Parameter Symbol Test Conditions Typ Unit Figure Output Off-Capacitance C O(OFF) VO = 28V, f = 1 MHz 145 pF 16 Output Offset Voltagea a. V OS is a function of IF, and is defined between pins 5 and 8, with pin 5 as the reference. VOS must be measured in a stable ambient (free of temperature gradients). |VOS|I F = 10 mA, IO = 0 mA 2 μV 19 Input Diode Temperature Coefficient ΔVF/ΔTA IF = 10 mA –1.4 mV/°C Input Capacitanceb b. Zero-bias capacitance measured between the LED anode and cathode. CIN VF = 0V, f = 1 MHz 20 pF Input-Output Capacitancec c. Device considered a two-terminal devi ce: pins 1 through 4 shorted together and pins 5 through 8 shorted together. CI-O VI-O = 0V, f = 1 MHz 1.5 pF Input-Output Resistancec RI-O VI-O = 500V, t = 60s 1013 Ω Turn On Time With Peakingd d. For a faster turn-on time, the op tional peaking circuit shown in Figure 1 can be implemented. tON IFPK = 100 mA, IFSS = 10 mA, VDD = 28V, IO = 800 mA 0.22 ms 1 R1 = REQUIRED CURRENT LIMITING RESISTOR FOR I F (ON) = 10 mA. R2 = PULL-UP RESISTOR FOR V F (OFF) < 600 mV; IF (V CC - VOH ) < 600 mV, OMIT R2. R3, C = OPTIONAL PEAKING CIRCUIT. TYPICAL VALUES (:) IF (PK) (mA) HSSR-711x tON (ms) 330 100 10 (NO PK) 100 2.0 1.0 0.48 0.22 * USE SECOND GATE IF IF (PK) > 50 mA REMINDER: TIE ALL UNUSED INPUTS TO GROUND OR V CC IN 1/4 54ACTOO* 1/4 54ACTOO VCC (+5V) 1200 : 330 : C 15 μF HSSR-711x IF V F

• 12 - HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, 5962-9314001, 5962-9314002 Data Sheet Design Considerations for Replacement of Electromechanical Relays Design Considerations for Replacement of Electromechanical Relays The HSSR-711x family can replace electromechanical relays with comparable output voltage and current ratings. The following design issues need to be considered in the replacement circuit. Input Circuit The drive circuit of the electromechanical relay coil needs to be modified so that the average forward current driving the LED of the HSSR-711x does not exceed 20 mA. A nominal forward drive current of 10 mA is recommended. A recommended drive circuit with 5V VCC and CMOS logic gates is shown in Figure 1. If higher VCC voltages are used, adjust the current limiting resistor to a nominal LED forward current of 10 mA. One important consideration to note is that when the LED is turned off, no more than 0.6V forward bias should be applied across the LED. Even a few microamps of current may be sufficient to turn on the HSSR- 711x, although it may take a considerable time. The drive circuit should maintain at least 5 mA of LED current during the ON condition. If the LED forward current is less than the 5 mA level, it causes the HSSR-711x to turn on with a longer delay. In addition, the power dissipation in the output power MOSFETs increases, which, in turn, may violate the power dissipation guidelines and affect the reliability of the device. Output Circuit Unlike with electromechanical relays, when considering solid-state relays, the designer should pay careful attention to the output on-resistance. The previous section, On-Resistance and Rating Curves, describes the issues that need to be considered. In addition, for strictly dc applications, the designer has an advantage using Connection B, which has twice the output current rating as Connection A. Furthermore, for dc-only applications, with Connection B the on-resistance is considerably less when compared to Connection A. Output over-voltage protection is yet another important design consideration when replacing electromechanical relays with the HSSR-711x. The output power MOSFETs can be protected using Metal oxide varistors (MOVs) or TransZorbs against voltage surges that exceed the 90V output withstand voltage rating. Examples of sources of voltage surges are inductive load kickbacks, lightning strikes, and electrostatic voltages that exceed the specifications on this data sheet. For more information on output load and protection, refer to Application Note 1047. References  Application Note 1047, Low On-Resistance Solid State Relays for High Reliability Applications.  Reliability Data for HSSR-7111, HSSR-7112, and HSSR-711E.

For product information and a complete list of distributors, please go to our web site: www.broadcom.com. Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom in the United States, certain other countries and/or the EU. Copyright © 2016 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. AV02-3835EN – November 11, 2016