DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
[ Obsolete product ] Agilent has a new name Keysight Technologies. Keysight Technologies Inc. is the world's leading electronic measurement company, transforming today's measurement experience through innovations in wireless, modular, and software solutions. With its HP and Agilent legacy, Keysight delivers solutions in wireless communications, aerospace and defense and semiconductor markets with world-class platforms, software and consistent measurement science. Alldatasheet.com
CAUTION: HSMM and HSMN-A1xx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Agilent HSMx-A16x-xxxxx PLCC-2 Surface Mount LED Indicator Black Surface Tinted Data Sheet
Description
This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior signs application conditions. This SMT LED package come with a black surface and tinted which is specially designed for signs application to minimize ambient reflection to improve contrast. T o facilitate easy pick & place assembly, the LEDs are packed in EIA- compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. The super wide viewing angle at 120° makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs.
Features
- Industry standard PLCC-2 package High reliability LED package High brightness using AlInGaP and InGaN dice technologies Available in full selection of colors
- Super wide viewing angle at 120° Available in 8 mm carrier tape on 7 inch reel (2000 pieces) Compatible with both IR and TTW soldering process Black Surface Tinted
Applications
Electronic signs and signals Interior full color sign Variable message sign
Notes: All dimensions in mm Device Selection Guide Color Part Number Min Iv @ 20mA (mcd) Ty pical Iv @ 2 0m A (mcd) Red HSMC-A160-Q00J1 63.0 100.0 HSMC-A161-S00J1 160.0 220.0 HSMZ-A160-T00J1 250.0 350.0 Yellow /Amber HSMA-A160-Q00J1 63.0 100.0 HSMA-A161-S00J1 160.0 220.0 HSMU-A160-R00J1 100.0 320.0 HSMU-A160-T00J1 250.0 320.0 Green HSMM-A161-R00J1 100.0 200.0 HSMM-A160-S00J1 160.0 350.0 Blue HSMN-A161-N00J1 25.0 50.0 HSMN-A160-P00J1 40.0 70.0 Notes: The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
Absolute Maximum Ratings (TA = 25°C) Parameters HSMC/A HSMV/Z HSMM/N DC Forward Current[1] 30 mA[3,4] 30 mA[3,4] 30 mA Peak Forward Current[2] 100mA 100mA 100mA Power Dissipation 63mW 72mW 114mW Reverse Voltage 5 5 5 Junction T emperature 110 °C 110 °C 110 °C Operating T emperature -55 °C to +100°C- 5 5 °C to +100°C- 5 5 °C to +100°C Storage T emperature -55 °C to +100°C- 5 5 °C to +100°C- 5 5 °C to +100°C Notes: 1. Derate linearly as shown in figure 2. Duty factor = 10%, Frequency = 1kHz. 3. Drive Current between 10mA and 30mA are re commended for best long term performance 4. Operation at current below 5mA is not recommended. Optical Characteristic (TA = 25°C) Color Part Number Dice Technology Peak Wavelength λ PEAK (nm) Typ. Dominant Wavelength λ D (nm) [1] Typ. Viewing Angle 2θ1/2 [2] (Degrees) Typ. Luminous Efficacyηv [3] (lm/W) Typ Luminous Intensity/ Total Flux I v(mcd)/Fv(mlm) Typ. Amber HSMA-A16x AlInGaP 592 590 120 480 0.45 Amber HSMU-A160 AlInGaP 594 592 120 500 0.45 Red HSMC-A16x AlInGaP 635 626 120 150 0.45 Red HSMZ-A160 AlInGaP 639 630 120 155 0.45 Green HSMM-A16x InGaN 523 525 120 500 0.45 Blue HSMN-A16x InGaN 468 470 120 75 0.45 Notes: 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, I e in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristic (TA = 25°C) Dice Technology Forward Voltage VF (Volts) @ IF = 20mA Reverse Voltage VR @ 100µA Reverse Voltage VR @ 10µA Thermal Resistance RθJP (°C/W) Typ Max Min Min Typ HSMC/A 1.9 2.4 5 - 280 HSMV/Z 2.2 2.6 5 - 280 HSMM/N 3.4 4.05 - 5 280
Figure 10. Recommended soldering pad pattern
Intensity Bin Select (X5X6) Individual reel will contain parts from 1 half bin only Intensity Bin Limits Color Bin Select (X7) Individual reel will contain parts from 1 full bin only Color Bin Limits T olerance of each bin limit = ±1nm Packaging Option (X8X9) X5 Min Iv Bin
0 Full Distribution
3 3 half bins starting from X 51 4 4 half bins starting from X 51 5 5 half bins starting from X 51 7 3 half bins starting from X 52 8 4 half bins starting from X 52 9 5 half bins starting from X 52 Bin ID Min (mcd) Max (mcd) J1 4.50 5.60 J2 5.60 7.20 K1 7.20 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 M1 18.00 22.40 M2 22.40 28.50 N1 28.50 35.50 N2 35.50 45.00 P1 45.00 56.00 P2 56.00 71.50 Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 T olerance of each bin limit = ± 12% 0F u l l D i s t r i b u t i o n ZA a n d B o n l y YB a n d C o n l y W C and D only V D and E only U E and F only T F and G only SG a n d H o n l y Q A, B and C only P B, C and D only NC , D a n d E o n l y M D, E and F only L E, F and G only K F, G and H only
1 A, B, C and D only
2 E, F G and H only
Blue Min (nm) Max (nm) A 460.0 465.0 B 465.0 470.0 C 470.0 475.0 D 475.0 480.0 Green Min (nm) Max (nm) A 515.0 520.0 B 520.0 525.0 C 525.0 530.0 D 530.0 535.0 Amber/ Yellow Min (nm) Max (nm) A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Red Min (nm) Max (nm) Full Distribution X 8X9 J1 20mA test current, T op Mount, 7 inch Reel J2 10mA test current, T op Mount, 7 inch Reel
www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna- tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 T aiwan: (+65) 6755 1843 Data subject to change. Copyright 2004 Agilent Technologies, Inc. July 21, 2004 5989-0496EN