DEMO-HSMP-38X6 BOARDCOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • 4 PIN Diodes in a SOT-25 package
  • 300 kHz to 4 GHz usable frequency band
  • High Linearity
  • Low insertion Loss
  • MSL-1 and Lead-free
  • Tape & Reel packaging option available Specification At 1 GHz, V+=5V
  • IIP3 = 45 dBm (Typical)
  • Attenuation = 38 dB (Typical)
  • Insertion Loss = -3 dB (Typical)
  • Return Loss = - 22 dB (Typical)

Applications

  • Broadband system application (i.e., CATV, WCDMA, etc)
  • General purpose Voltage-Control-Attenuator for high linearity applications.

Absolute Max Ratings [1], Tc = +25oC Symbol Parameter Unit Abs Max If Forward Current (1 µs Pulse) Amp 1 PIV Peak Inverse Voltage V 100 Tj Junction Temperature °C 150 Tstg Storage Temperature °C -60 to 150 qlb Thermal Resistance [2] °C/W 167 PIn Input Power [3] W 1.0 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. Thermal Resistance is measured from junction to board using IR method. 3. The Max Input Power is tested using demoboard as shown in Figure 1 at the worst-case (highest attenuation) bias condition of V+=5V, Vc=0V. Typical Performance, Tc = +25oC (Each Diode) Carrier Lifetime t(ns) Reverse Recovery Time Trr (ns) Total Capacitance CT (pF) 1500 300 0.27 Test Condition IF = 50mA IR = 250 mA VR = 10 V IF = 20 mA 90% Recovery VR = 50V f = 1MHz Typical Performance for HSMP-3816 Quad PIN Diode π Attenuator @ +25oC Parameter Test Condition Units Typical Insertion Loss Vc = 15V, V+ = 5V, Freq = 1GHz dB -3.0 Return Loss Vc = 0V, V+ = 5V, Freq = 1GHz dB -22 Attenuation Vc = 0V, V+ = 5V, Freq = 1GHz dB 38 Input IP3 Vc = 1.5V, V+ = 5V, Freq = 1GHz dBm 45 Input IP3 Vc = 15V, V+ = 5V, Freq = 1GHz dBm 42 Input IP3 Vc = 1.5V, V+ = 5V, Freq = 100MHz dBm 37 Input IP3 Vc = 15V, V+ = 5V, Freq = 100MHz dBm 37 Input IP3 Vc = 1.5V, V+ = 5V, Freq = 30MHz dBm 35 Input IP3 Vc = 15V, V+ = 5V, Freq = 30MHz dBm 35 Notes : 1. Measurement above obtained using Wideband RF circuit design shown in Figure 1 & 2 Electrical Specifications, Tc = +25oC (Each Diode) Minimum Breakdown Voltage VBR (V) Maximum Total Capacitance CT (pF) Minimum Resistance at IF = 0.01mA, RH (Ω) Maximum Resistance at IF = 20mA, RL (Ω) Maximum Resistance at IF = 100mA, RT (Ω) Resistance at IF = 1mA, RM (Ω) 100 0.35 1500 10 3.0 45 to 80 Test Conditions VR = VBR Measure IR≤ 10uA VR = 50V f = 1MHz IF = 0.01mA f = 100MHz IF = 20mA f = 100MHz IF = 100mA f = 100MHz IF = 1mA f = 100MHz Note : Rs parameters are tested under AQL 1.0

  1. Measurements above were obtained using Wideband RF circuit design shown in Figures 1 and 2.
  2. Typical values were derived using limited samples during initial product characterization and may not be representative of the overall distribution.

Figure 7. Insertion Loss vs. Frequency Figure 8. Return Loss vs. Frequency Figure 6. Attenuation vs. Control Voltage Figure 9. Input IIP3 vs. Control Voltage Figure 10. Series & Shunt Diode Bias Current vs. Control Voltage Figure 11. Attenuation vs. Temperature

60 F = 100 MHz

Package Outline & Dimension PCB Footprint EH B e D C A L C PKGL GAGE PLANESEATING PLANE 0.250 0.074 1.9 0.037 0.95 0.028 0.7 0.094 2.4 0.039 1.0 DIMENSIONS IN mm Inches Symbol Dimension Minimum Nominal Maximum D 2.80 2.90 3.00 H 2.60 2.80 3.00 E 1.50 1.60 1.70 e1 1.88 1.90 1.92 e 0.93 0.95 0.97 B 0.35 0.50 A2 0.9 1.15 1.30 C 0.08 0.22 L 0.35 0.60 A1 0 0.15 A 0.9 1.40

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0066EN AV02-0407EN - June 3, 2009 Part Number Ordering Information Part number No. of Units Container HSMP-3816-BLKG 100 Anti-static bag HSMP-3816-TR1G 3000 7” reel HSMP-3816-TR2G 10000 13” reel F E Po P2 D W Ao Bo Ko P 8˚ MAX 7˚ MAX Tape Dimension Device Orientation ATx ATx ATx ATx 8 mm 4 mm End View Top View USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL