HSC-AT11 HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
EnvironmentAttenuatorsTerminatorsPOF / PCF SC Type Fixed Attenuators (for single mode) HSC-AT11 Series 'JHVSF 'JHVSF Simplified SC receptacle SC duplex adapter Simplified SC plug HSC-AT11 Series SC plug HSC-AT11 Series HSC-AT11 Series SC plug ■Features 1. SC Type : IEC 61754-4 (JIS C 5973) 2. For high input power : 250mW max 3. Ensure mating with simplified SC plug / receptacle. (figure 1). 4. Enables adjacently connection with horizontal duplex adapter. (figure 2) 5. AdPC, UPC and APC (Angled PC) polishing types are available. 6. Wide attenuation lineup. Both wavelength 1310nm & 1550nm are available. ■Applications Power level adjustment of optical fiber communication networks. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.
HSC-AT11 Series●SC Type Fixed Attenuators(for single mode) SCFCMUHarsh EnvironmentAttenuatorsTerminatorsPOF/ PCF ■Product Specifi cations
- AdPC (Advanced PC) Polishing type: Return Loss ≥ 40dB Ratings Operating temperature range -40°C to +75°C Storage temperature range -40°C to +85°C Max. Input Power 250mW Fiber type SM Item Test Method Requirments Optical Characteristics Attenuation Measurement at a point within wavelength of 1310±30 nm and a point within wavelength of 1550±30 nm. See the attenuation table on the next page Return Loss ≥40dB Mechanical Characteristics Engagement and Separation forces Engagement and separation forces at 50mm/s. Engagement force ʽ 19.6N Separation force ʽ19.6N Durability 500 times 1) Attenuation and return loss shall be satisfied before and after the test. 2) No breakage, crack or looseness on components. Flex test 8.82N load, 100 cycles Telcordia GR-910-CORE Twist test 13.23N load, 10 cycles Telcordia GR-910-CORE Side test 12.25 N load, 90° angle Telcordia GR-910-CORE Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 3 hours in each of the 3 axis. Impact test Acceleration of 981 m/s 2, 6 ms duration,half sine shock pulse, 3 cycles in each of the 3 axis. Environmental Characteristics Heat/humidity cycles Humidity : 90% to 96% Temperature : -10ˆ to 65ˆ Time : 480 hours(20 Cycles) 1) Attenuation and return loss shall be satisfied before and after the test. 2) No breakage, crack or looseness on components. Heat cycles Temperature : -40 ˆ to +80ˆ, 100 cycles Dray heat 500 hours at 85 ˆ. Cold 500 hours at -40 ˆ. Salt mist 48 hours in a 5% concentration of salt mist No signifi cant corrosion. ■Materials Part Material Body Zinc alloy Ferrule Zirconia Split sleeve Zirconia
HSC-AT11 Series●SC Type Fixed Attenuators(for single mode) SCFCMUHarsh EnvironmentAttenuatorsTerminatorsPOF / PCF HZg^VaCd# (*#* .#) &'#+ ,'*&+ Part Number CL No. Attenuation Attenuation Tolerance Return Loss Wavelength Split Sleeve Fiber type -BCFMDPMPS HSC-AT11K-A00 820-6001-6 0dB +0.4dB ≥40dB 1310nm 1550nm Zirconia SM mauve HSC-AT11K-A01 820-6002-9 1dB ±0.5dB HSC-AT11K-A02 820-6003-1 2dB ±0.5dB HSC-AT11K-A03 820-6004-4 3dB ±0.6dB HSC-AT11K-A04 820-6005-7 4dB ±0.6dB HSC-AT11K-A05 820-6006-0 5dB ±0.6dB HSC-AT11K-A06 820-6007-2 6dB ±0.6dB HSC-AT11K-A07 820-6013-5 7dB ±0.7dB HSC-AT11K-A08 820-6014-8 8dB ±0.8dB HSC-AT11K-A09 820-6015-0 9dB ±0.9dB HSC-AT11K-A10 820-6008-5 10dB ±1.0dB HSC-AT11K-A11 820-6016-3 11dB ±1.1dB HSC-AT11K-A12 820-6017-6 12dB ±1.2dB HSC-AT11K-A13 820-6018-9 13dB ±1.3dB HSC-AT11K-A14 820-6019-1 14dB ±1.4dB HSC-AT11K-A15 820-6009-8 15dB ±1.5dB HSC-AT11K-A16 820-6020-0 16dB ±1.5dB HSC-AT11K-A20 820-6010-7 20dB ±1.5dB HSC-AT11K-A25 820-6011-0 25dB ±1.5dB HSC-AT11K-A30 820-6012-2 30dB ±2.5dB
HSC-AT11 Series●SC Type Fixed Attenuators(for single mode) SCFCMUHarsh EnvironmentAttenuatorsTerminatorsPOF/ PCF ■Product Specifi cations
- UPC Polishing type : Return Loss ≥ 50dB
- APC Polishing type : Return Loss ≥ 60dB Ratings Operating temperature range -40°C to +75°C Storage temperature range -40°C to +85°C Max. Input Power 250mW Fiber type SMF Item Test Method (Telcordia GR-910-CORE) Specifications Polishing type UPC APC Optical characteristics Attenuation Measurement at a point within wavelength of 1310±30 nm and a point within wavelength of 1550±30 nm. See the attenuation table on the next page Return Loss ≥50dB ≥60dB Input power Input power250mW LD Wavelength1470nm Time100 hours 1) After test, change in attenuation (fluctuation) and return loss shall be as follows. attenuation : ≤0.5dB return loss ≥50dB 2) No distortion, package cracks, hardening or softening of materials, and also no damage to the attenuation element. Environmental characteristics Controlled Operating Environment Temperature : -5 to 50 ˆ Time : 182.5 hours Humidity : 15 to 90 % Uncontrolled Operating Environment Temparature -40 to 75 ˆ Cycles 21 cycles ( 8h/cycle) Non-Operating Environment Low-Temperture Exposure and Thermal Shock Temperature 23 → −40 → −40 → 23 Time 2.1h 72h 4min High-Temperture Exposure and Thermal Shock Temperature 23 → 70 → 70 → 23 Time 1.6h 72h 5min High Relative Humidity Exposure Temperature 23 → 40 → 40 → 23 Time 0.6h 96h 0.6h Humidity : 90 to 95 % Humidity/Condensation Cycling Test Temperature -10 to 65 ˆ Humidity 90 to 100 % Cycles 14cycles(12h/cycle) Water Immersionɹ Temperature 43 ˆ Time 168 h Water PH 5.5 Mechanical characteristics Vibration Test Frequency range 10 to 55 Hz Amplitude 1.52mm Time 2 hours in each 3 axis Side Pull Load Angle : 90 ° Load : 12.25 N 1) During, after test, change in attenuation (fluctuation) and return loss shall be as follows. attenuation : ≤0.5dB return loss ≥50dB 2) No distortion, package cracks, hardening or softening of materials, and also no damage to the attenuation element. Cable Retention Load : 19.6N 1) After test, change in attenuation (fluctuation) and return loss shall be as follows. attenuation : ≤0.5dB return loss ≥50dB 2) No distortion, package cracks, hardening or softening of materials, and also no damage to the attenuation element. Durability 200 times Impact Test Drop the tested components from 1.8 m hight to the concrete floor. 8 times in each 3 axis Note) APC polishing type isn’t compatible with UPC polishing type.
HSC-AT11 Series●SC Type Fixed Attenuators(for single mode) SCFCMUHarsh EnvironmentAttenuatorsTerminatorsPOF / PCF HZg^VaCd# (*#* .#) &'#+ ,'*&+ APC Polishing type ɿ Return Loss ≥ 60dB (*#* ;ZggjaZZcY[VXZ\\ZdbZign UPC Polishing type ɿ Return Loss ≥ 50dB "1$1PMJTIJOHUZQF Part Number CL No. Attenuation Attenuation Tolerance Return Loss Wavelength Split Sleeve Fiber type -BCFMDPMPS HSC-AT11U-A00 820-9500-2 0dB +0.4dB ≥50dB 1310nm 1550nm Zirconia SM %BSLCMVF HSC-AT11U-A01 820-9501-5 1dB ±0.5dB HSC-AT11U-A02 820-9502-8 2dB ±0.5dB HSC-AT11U-A03 820-9503-0 3dB ±0.6dB HSC-AT11U-A04 820-9504-3 4dB ±0.6dB HSC-AT11U-A05 820-9505-6 5dB ±0.6dB HSC-AT11U-A06 820-9506-9 6dB ±0.6dB HSC-AT11U-A07 820-9507-1 7dB ±0.7dB HSC-AT11U-A08 820-9508-4 8dB ±0.8dB HSC-AT11U-A09 820-9509-7 9dB ±0.9dB HSC-AT11U-A10 820-9510-6 10dB ±1.0dB HSC-AT11U-A11 820-9511-9 11dB ±1.1dB HSC-AT11U-A12 820-9512-1 12dB ±1.2dB HSC-AT11U-A13 820-9513-4 13dB ±1.3dB HSC-AT11U-A14 820-9514-7 14dB ±1.4dB HSC-AT11U-A15 820-9515-0 15dB ±1.5dB HSC-AT11U-A16 820-9516-2 16dB ±1.5dB HSC-AT11U-A20 820-9517-5 20dB ±1.5dB HSC-AT11U-A25 820-9518-8 25dB ±1.5dB HSC-AT11U-A30 820-9519-0 30dB ±2.5dB Part Number CL No. Attenuation Attenuation Tolerance Return Loss Wavelength Split Sleeve Fiber type -BCFMDPMPS HSC-AT11CS-A01 820-9001-2 1dB +0.8dB ≥60dB 1310nm 1550nm Zirconia SM Green HSC-AT11CS-A02 820-9002-5 2dB ±0.8dB HSC-AT11CS-A03 820-9003-8 3dB ±0.8dB HSC-AT11CS-A04 820-9004-0 4dB ±0.8dB HSC-AT11CS-A05 820-9005-3 5dB ±0.8dB HSC-AT11CS-A06 820-9006-6 6dB ±0.8dB HSC-AT11CS-A07 820-9007-9 7dB ±0.8dB HSC-AT11CS-A08 820-9008-1 8dB ±0.8dB HSC-AT11CS-A09 820-9009-4 9dB ±0.9dB HSC-AT11CS-A10 820-9010-3 10dB ±1.0dB HSC-AT11CS-A11 820-9011-6 11dB ±1.1dB HSC-AT11CS-A12 820-9012-9 12dB ±1.2dB HSC-AT11CS-A13 820-9013-1 13dB ±1.3dB HSC-AT11CS-A14 820-9014-4 14dB ±1.4dB HSC-AT11CS-A15 820-9015-7 15dB ±1.5dB HSC-AT11CS-A16 820-9016-0 16dB ±1.5dB HSC-AT11CS-A20 820-9017-2 20dB ±1.5dB HSC-AT11CS-A25 820-9018-5 25dB ±1.5dB HSC-AT11CS-A30 820-9019-8 30dB ±2.5dB Powered by TCPDF (www.tcpdf.org)