HS401 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.023/06/22 Heatshrink Adhesive Lined Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro High Shrink Ratio, Adhesive Lined, Polyolefin Heat Shrink Tubing 3X and 4X Characteristics: Operating Temperature : -55°C to +125°C Min. Shrink Temperature : 70°C Shrink Ratio : 3:1 and 4:1 Approvals : UL224, 125°C 600V VW-1 (except clear) Standard Colour : Black (Other colours are also available on request)
Applications
Manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for the protected items. Typically used for the protection of automotive wires, bundled wires and metal tubes against water and moisture. The high expansion ratio makes it possible to repair most damaged cable jackets without removing connectors. Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 10.4MPa Ultimate Elongation (%) ASTM D 2671 30 Longitudinal Shrinkage (%) UL 224 0 to -10 Heat Aging Ultimate Elongation (%) 158°C, 168hrs. 200 Flammability VW-1 Pass (outer jacket only) Dielectric Strength (kv/mm) IEC 243 20 Volume Resistivity (Ω-cm) UL224 1 × 1014 Copper Stability ASTM D 2671 Pass Corrosion UL224 No corrosion Dimensions: Heat Shrinkable Tubing of 3X Size As supplied (mm) After Recovered (mm)
Page <2> V1.023/06/22 Heatshrink Adhesive Lined Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dimensions: Heat Shrinkable Tubing of 4X Size As supplied (mm) After Recovered (mm) Part Number Inch mm Min. I.D. Average W.T. Adhesive Thickness O.D. Size As supplied (mm) After Recovered (mm) Description Part Number Heatshrink, Black, 4mm, 1.2m HS400 Heatshrink, Sleeving, 6mm, 4:1 HS401 Heatshrink, Sleeving, 8mm, 4:1 HS402 Heatshrink, Sleeving, 12mm, 4:1 HS403 Heat Shrink, Black, 16mm, 1.2m HS404 Heatshrink, 20mm, Black, 1.2m HS405 Heat Shrink, Adhesive, Black, 24mm, 1.2m HS406 Part Number Table Description Part Number Heat Shrink, Adhesive, Black, 32mm, 1.2m HS407 Heatshrink, Sleeving, 52mm, 4:1 HS408 Heatshrink, Sleeving, 4mm, 4:1, 5m HS409 Heatshrink, Sleeving, 6mm, 4:1, 5m HS410 Heatshrink, Sleeving, 8mm, 4:1, 5m HS411 Heatshrink, Sleeving, 12mm, 4:1, 5m HS412 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.