HS2F

HS2A TSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Features

/cuspopen Glass passivated junction chip. /cuspopen For surface mounted application /cuspopen Low forward voltage drop /cuspopen Low profile package /cuspopen Built-in stain relief, ideal for automatic placement /cuspopen Fast switching for high efficiency /cuspopen High temperature soldering: 2 6 0 ℃/10 seconds at terminals /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-O Mechanical Data /cuspopen Cases: Molded plastic /cuspopen Terminals: Solder plated /cuspopen Polarity: Indicated by cathode band /cuspopen Packing: 12mm tape per E1A STD RS-481 /cuspopen Weight: 0.093 gram SMB/DO-214AA Dimensions in inches and (millimeters) Maximum Ratings and El ectrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbo l HS HS HS HS HS HS HS HS Units Maximum Recurrent Peak Reverse Voltage VRRM 50 400 200 300 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 300 400 600 800 1000 V Maximum Average Forward Rectified Current See Fig. 2 I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage @ 2.0A VF 1.0 1.3 1.7 V Maximum DC Reverse Current @TA =25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time (Note 1) Trr 50 75 nS Typical Junction Capacitance (Note 2) Cj 50 30 pF Maximum Thermal Resistance (Note 3) RθJA 80 ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Reverse Reco very Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied V R=4.0 Volts

• 303 - FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (HS2A THRU HS2M) FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 25 50 75 100 125 150 175 1.0 1.5 0.5 2.0 3.0 2.5 LEAD TEMPERATURE. ( C) o FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.001 0.01 0.1 FORWARD VOLTAGE. (V) HS2 G HS2J-HS2M HS2A-HS2D FIG.6- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 0.5 1 5 2 10 20 50 100 200 500 1000 100 125 150 175 REVERSE VOLTAGE. (V) HS2A-HS2G HS2J-HS2M FIG.3- TYPICAL REVERSE CHARACTERISTICS 20 40 60 80 100 1200.1 100 1000 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=25 C0 Tj=100 C0 INSTANTANEOUS REVERSE CURRENT .( A ) P.C.B.MOUNTED COPPER PAD AREAS 0 140 0 0 0