HS-0548RH RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
- Electrically Screened to SMD # 5962-95694
- QML Qualified per MIL-PRF-38535 Requirements
- No Latch-Up
- No Channel Interaction During Overvoltage
- Guaranteed r ON Matching
- Break-Before-Make Switching
Applications
- Data Acquisition Systems
- Control Systems
- Telemetry Pinouts HS-0548RH GDIP1-T16 (CERDIP) OR CDIP2-T16 (SBDIP) TOP VIEW HS-0549RH GDIP1-T16 (CERDIP) OR CDIP2-T16 (SBDIP) TOP VIEW
Ordering Information
MKT. NUMBER TEMP. RANGE (oC) 5962D9569401VEA HS1-0548RH-Q -55 to 125 5962D9569401VEC HS1B-0548RH-Q -55 to 125 5962D9569402VEA HS1-0549RH-Q -55 to 125 5962D9569402VEC HS1B-0549RH-Q -55 to 125 AO ENABLE -VSUPPLY IN 1 IN 2 IN 3 OUT IN 4 GND SUPPLY IN 5 IN 6 IN 7 IN 8 ENABLE -VSUPPLY IN 1A IN 2A IN 3A OUTA IN 4A SUPPLY IN 1B IN 2B IN 3B IN 4B OUT B GND
FIGURE 1. ACCESS TIME
FIGURE 5. ADDRESS DECODER F IGURE 6. MULTIPLEX SWITCH F0 = 100kHz 50% duty cycle; V IL = 0.8V Max; VIH = 4.0V Min.
HS-0548RH, HS-0549RH FN3543 Rev 4.00 Page 5 of 7 August 2001 HS-0549RH DYNAMIC BURN-IN AND LIFE TEST CIRCUIT V3 = -15.5V, 0.5V R1 = 10k , 5% C1 =0 . 0 1F minimum (per socket) D1 = 1N4002 or equivalent (per board) 50% duty cycle, VIL = 0.8V Max; VIH = 4.0V Min HS-0549RH STATIC BURN-IN TEST CIRCUIT V1 = +5.5V, 0.5V V2 = +15.5V, 0.5V R1 = 10k ,10% C1 =0 . 0 1F minimum (per socket) D1 = 1N4002 or equivalent (per board) Burn-In/Life Test Circuits (Continued) V2V3 D1 C1 R1 R1 D1 C1 V2V3 D1 C1 R1 R1 D1 C1 Irradiation Circuits HS-0549RH R1 = R2 = 10k5% HS-0548RH R1 = 10k5% +5V -15V +1V R1 R2 +1V +15V 14 +5V -15V +1V +1V +15V
HS-0548RH, HS-0549RH FN3543 Rev 4.00 Page 6 of 7 August 2001 Die Characteristics DIE DIMENSIONS: 83 mils x 108 mils x 19 mils INTERFACE MATERIALS: Glassivation: Type: Nitride Thickness: 7kÅ 0.7kÅ Top Metallization: Type: Al Thickness: 16kÅ 2kÅ Substrate: CMOS, DI ASSEMBLY RELATED INFORMATION: Substrate Potential: Floating ADDITIONAL INFORMATION: Worst Case Current Density: 1.4 x 105 A/cm2 Transistor Count: 253 Metallization Mask Layout HS-0548RH HS-0549RH NOTE: Pad Numbers Correspond to DIP Pin Numbers Only IN 6 IN 7 IN 8 OUT IN 4 IN 3 IN 5 GND IN 2 IN 1 A2 A1 A0 EN IN3B IN4B OUT B OUT A IN4A IN3A IN2A IN1A IN2B IN1B GND A1 A0 EN
FN3543 Rev 4.00 Page 7 of 7 August 2001 HS-0548RH, HS-0549RH Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com For additional products, see www.intersil.com/en/products.html © Copyright Intersil Americas LLC 2001. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.