HS-0546RH RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Features

  • Electrically Screened to SMD # 5962-95693
  • QML Qualified per MIL-PRF-38535 Requirements
  • No Latch-Up
  • No Channel Interaction During Overvoltage
  • Guaranteed rON Matching
  • Break-Before-Make Switch

Applications

  • Data Acquisition Systems
  • Control Systems
  • Telemetry Pinouts HS-0546RH GDIP1-T28 (CERDIP) OR CDIP2-T28 (SBDIP) TOP VIEW HS-0547RH GDIP1-T28 (CERDIP) OR CDIP2-T28 (SBDIP) TOP VIEW

Ordering Information

MKT. NUMBER PART MARKING TEMP . RANGE (°C) 5962D9569301V9A HS0-0546RH-Q Q-5962D9569301V9A 25 5962D9569301VXC HS1B-0546RH-Q Q-5962D9569301VXC -55 to 125 5962D9569302V9A HS0-0547RH-Q Q-5962D9569302V9A 25 5962D9569302VXC HS1B-0547RH-Q Q-5962D9569302VXC -55 to 125 VSUPPLY NC NC IN 16 IN 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 GND V REF ADDRESS A3 OUT IN 8 IN 7 IN 6 IN 5 IN 3 IN 1 ENABLE ADDRESS A0 ADDRESS A1 ADDRESS A2 SUPPLY IN 4 IN 2 +VSUPPLY OUT B NC IN 8B IN 7B IN 6B IN 5B IN 4B IN 3B IN 2B IN 1B GND V REF NC OUT A IN 8A IN 7A IN 6A IN 5A IN 3A IN 1A ENABLE ADDRESS A0 ADDRESS A1 ADDRESS A2 SUPPLY IN 4A IN 2A

HS-0546RH, HS-0547RH FN3544 Rev.4.00 Page 2 of 7 March 13, 2006 Functional Diagrams HS-0546RH HS-0547RH †DIGITAL INPUT OVER- CLAMP AND SIGNAL ISOLATION VOLTAGE 5V REF †††† DRIVER DECODER/ IN1 IN2 IN16 A1 A2 A3 EN OUT PROTECTION LEVEL SHIFT VREF † † † A1 A2 EN A0VREF IN1B LEVEL SHIFT OVER- CLAMP AND SIGNAL ISOLATION VOLTAGE 5V REF IN1A IN8A IN8B OUT A DRIVER DECODER/ OUT B †DIGITAL INPUT PROTECTION HS-0546RH TRUTH TABLE A3 A2 A1 A0 EN “ON” CHANNEL XXXXL N O N E LLLLH 1 LLLH H 2 LLHLH 3 L LHHH 4 LHLLH 5 LHLHH 6 LHHLH 7 LHHHH 8 HLLLH 9 HLLHH 1 0 HLHLH 1 1 HLHHH 1 2 HHL LH 1 3 HHLHH 1 4 HHHLH 1 5 HHHHH 1 6 HS-0547RH TRUTH TABLE A2 A1 A0 EN “ON” CHANNEL PAIR XXXL N O N E LLLH 1 LLH H 2 LHLH 3 LHHH 4 HLLH 5 HLHH 6 HHLH 7 HHHH 8

HS-0546RH, HS-0547RH FN3544 Rev.4.00 Page 5 of 7 March 13, 2006 Irradiation Circuit Burn-In/Life Test Circuits DYNAMIC AND LIFE TEST NOTES: 1. The Dynamic Test Circuit is utilized for all life testing. 2. V1 = +15V minimum, +16V maximum. 3. V2 = -15V maximum, -16V minimum. 4. R1, R2 = 10k, 5%, 1/4 or 1/2W (per socket). 5. C1, C2 = 0.01F minimum (per socket) or 0.1F minimum (per row). 6. D1, D2 = 1N4002 or equivalent (per board). 40% - 60% duty cycle; VIL = 0.8V maximum; VIH = 4.0V minimum. STATIC NOTES: 8. V1 = 5V minimum, 6V maximum. 9. V2 = 15V minimum, 16V maximum. 10. V3 = -15V maximum, -16V minimum. 11. R1, R2 = 10k, 5%, 1/4 or 1/2W (per socket). 12. C1, C2 = 0.01F minimum (per socket) or 0.1F minimum (per row). 13. D1, D2 = 1N4002 or equivalent (per board). D2 C2 V2R2 D1C1 D2 C2 V3R2 D1C1 10k +15V +1V +5V NC -15V 10k

HS-0546RH, HS-0547RH FN3544 Rev.4.00 Page 6 of 7 March 13, 2006 Die Characteristics DIE DIMENSIONS: 83.9 mils x 159 mils x 19 mils INTERFACE MATERIALS: Glassivation: Type: Nitride Thickness: 7kÅ 0.7kÅ Top Metallization: Type: Al Thickness: 16kÅ 2kÅ Substrate: CMOS, DI ASSEMBLY RELATED INFORMATION: Substrate Potential: Unbiased (DI) ADDITIONAL INFORMATION: Worst Case Current Density: 1.4 x 105 A/cm2 Transistor Count: HS-0546 - 485 HS-0547 - 485 Metallization Mask Layout HS-0546RH HS-0547RH EN A1A0 A3 A2 V REF GND IN 9 IN 10 IN 11 IN 12 IN 13 IN 14 IN 15 IN 16 IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 -V OUT +V NC EN A1A0 NC A2 V REF GND IN 1B IN 2B IN 3B IN 4B IN 5B IN 6B IN 7B IN 8B IN 1A IN 2A IN 3A IN 4A IN 5A IN 6A IN 7A IN 8A -V OUT A +V OUT B

FN3544 Rev.4.00 Page 7 of 7 March 13, 2006 HS-0546RH, HS-0547RH Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com For additional products, see www.intersil.com/en/products.html © Copyright Intersil Americas LLC 2001-2006. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.