HS114 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Semi-rigid, adhesive lined, polyolefin tubing
- 3:1 shrink ratio
- Splash-resistant, moisture-resistant covering
- Rugged protection against abrasion, vibration and flexing
- Excellent strain relief and insulation of weak points
- Operation temperature range : -45°C to +125°C
- Minimum Shrink Temperature +70°C
- UL Approval: UL224, 125°C 600V VW-1 (except clear) Dimension Table Size As supplied (mm) After Recovered (mm) Inch mm Internal Diameter Min. Internal Diameter Max. Total Wall Thickness Wall Thickness of Adhesive Product Properties Technical Data Out Jacket Material Property Test Method Typical Data Tensile Strength ASTM D 2671 ≥12MPa Ultimate Elongation ASTM D 2671 ≥300% Longitudinal Shrinkage UL 224 ±8% Heat Aging Ultimate Elongation 158°C, 168hrs ≥200% Flammability VW-1 Pass (out jacket only) Dielectric Strength IEC 243 ≥15kV/mm Volume Resistivity (ohm-cm) UL224 ≥1014 Ω.cm Copper Stability ASTM D 2671 Pass Corrosion UL224 No corrosion Property Test Method Typical Data Water Absorption ISO 62 <0.2% Softening Point ASTM D E28 95°C Peel Strength (to PE) ASTM D 1000 120N/25m Peel Strength (to AL) ASTM D 1000 80N/25m Technical Data Adhesive
Page <2> V1.023/06/22 Heat Shrink Tubing Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Part Number Table Description Part Number Heat Shrink Tubing, 3:1, 3.2mm, Black, 10m HS114 Heat Shrink Tubing, 3:1, 4.8mm, Black, 10m HS115 Heat Shrink Tubing, 3:1, 6.4mm, Black, 10m HS116 Heat Shrink Tubing, 3:1, 7.9mm, Black, 10m HS117 Heat Shrink Tubing, 3:1, 9.5mm, Black, 10m HS118 Heat Shrink Tubing, 3:1, 12.7mm, Black, 10m HS119 Heat Shrink Tubing, 3:1, 15mm, Black, 10m HS120 Heat Shrink Tubing, 3:1, 19.1mm, Black, 10m HS121 Heat Shrink Tubing, 3:1, 3.2mm, Black, 1.2m HS114 1.2M Heat Shrink Tubing, 3:1, 4.8mm, Black, 1.2m HS115 1.2M Heat Shrink Tubing, 3:1, 6.4mm, Black, 1.2m HS116 1.2M Heat Shrink Tubing, 3:1, 7.9mm, Black, 1.2m HS117 1.2M Heat Shrink Tubing, 3:1, 9.5mm, Black, 1.2m HS118 1.2M Heat Shrink Tubing, 3:1, 12.7mm, Black, 1.2m HS119 1.2M Heat Shrink Tubing, 3:1, 15mm, Black, 1.2m HS120 1.2M Heat Shrink Tubing, 3:1, 19.1mm, Black, 1.2m HS121 1.2M Heat Shrink Tubing, 3:1, 25.4mm, Black, 1.2m HS122 1.2M Heat Shrink Tubing, 3:1, 30mm, Black, 1.2m HS123 1.2M Heat Shrink Tubing, 3:1, 39mm, Black, 1.2m HS124 1.2M Heat Shrink Tubing, 3:1, 50mm, Black, 1.2m HS125 1.2M Size As supplied (mm) After Recovered (mm) Inch mm Internal Diameter Min. Internal Diameter Max. Total Wall Thickness Wall Thickness of Adhesive 2 Ø50 50 17 2.45 ±0.4 0.75 ±0.3 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.