HS06B60T HUIXIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Parameter Symbol Value Unit Storage junction temperature range Tstg -40-150 ℃ Operating junction temperature range Tj -40-125 ℃ Repetitive peak off-state voltage (Tj=25℃) VDRM 600 V Repetitive peak reverse voltage (Tj=25℃) VRRM 600 V RMS on-state current (TC≤100℃) IT(RMS) 6 A Non repetitive surge peak on-state current (full cycle , tp=20ms , Tj=25℃) ITSM A Non repetitive surge peak on-state current (full cycle , tp=16.6ms , Tj=25℃) 72 I2t value for fusing (tp=10ms , Tj=25℃) I2t 21 A2s Critical rate of rise of on-state current (IG=2×IGT , f=100Hz , Tj=125℃) dI/dt 100 A/μs Peak gate current (tp=20μs , Tj=125℃) IGM 4 A Average gate power dissipation (Tj=125℃) PG(AV) 0.5 W Peak gate power PGM 10 W Symbol Value Unit IT(RMS) 6 A VDRM /VRRM 600 V IGTⅠ/Ⅱ/Ⅲ 50/50/50 mA HS06B60T 6A TRIAC Rev.01 DESCRIPTION: The HS06B60T triac is suitable for general purpose AC switching. It can be used as an ON/OFF function in applications such as heating regulation, induction motor starting circuits, for phase control operation in light dimmers, motor speed controllers. HS06B60T snubberless triac is especially recommended for use on inductive loads. By using an internal ceramic pad, HS06B60T provides a rated insulation voltage of 2500 VRMS, Package TO-220A is RoHS compliant. 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 1of 4
(Tj=25℃; non-repetitive,off-state;FIG.7) Vpp 4 kV ELECTRICAL CHARACTERISTICS (Tj=25℃ unless otherwise specified) Symbol Test Condition Quadrant Value Unit IGT VD =12V RL =33Ω Ⅰ-Ⅱ-Ⅲ MAX. 50 mA VGT Ⅰ-Ⅱ-Ⅲ MAX. 1 V VGD VD =VDRM Tj =125℃ RL =3.3KΩ Ⅰ-Ⅱ-Ⅲ MIN. 0.2 V IL IG =1.2IGT Ⅰ-Ⅲ MAX. mA Ⅱ 80 IH IT =100mA MAX. 50 mA dV/dt VD=400V Gate Open Tj =125℃ MIN. 2000 V/μs (dI/dt)c (dV/dt)c=20V/μs, Tj=125℃ MIN. 8 A/ms ton IG=80mA IA=400mA IR=40mA Tj=25℃ TYP. μs toff 50 STATIC CHARACTERISTICS Symbol Parameter Value(MAX.) Unit VTM ITM =8.5A tp=380μs Tj=25℃ 1.5 V VTO Threshold voltage Tj=125℃ 0.82 V RD Dynamic resistance Tj=125℃ 57 mΩ IDRM VD =VDRM VR =VRRM Tj=25℃ 5 μA IRRM Tj=125℃ 0.2 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth(j-c) junction to case (AC) 3 ℃/W Rth(j-a) junction to ambient (AC) 60 ℃/W 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 2of 4
FIG.1 Maximum power dissipation versus RMS on-state current FIG.2: RMS on-state current versus case temperature 0 1 2 3 4 5 6 7 P(W) IT(RMS) (A) 100℃ 0 25 50 75 100 125 IT(RMS) (A) TC(℃) FIG.3: Surge peak on-state current versus number of cycles FIG.4: On-state characteristics ITSM(A) Number of cycles Tc=25℃,tp=20ms,one cycle,sine 0 0.5 1 1.5 2 2.5 3 3.5 ITM(A) VTM(V) Tj=25℃typ Tj=25℃max Tj=125℃typ FIG.5: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp<20ms, and corresponding value of I2t (dI/dt<100A/μs) FIG.6: Relative variations of gate trigger current, holding current and latching current versus junction temperature dI/dt ITSM I2t 100 1000 0.01 0.1 1 10 tp(ms) ITSM(A), I2t(A2s) 0.5 1.5 2.5 -40 -20 0 20 40 60 80 100 120 140 Tj(℃) IGT,IH,IL(Tj)/IGT,IH,IL(Tj=25℃) IGT(I/II)&IH IGT(III) IL 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 3of 4
FIG.7：Test circuit for inductive and resistive loads to IEC-61000-4-5 standards AC INPUT Filtering Unit IEC61000-4-5 Standards Surge Generator 1.2/50μS voltage surge 8/20μS current surge RGen Load Model R L 38μH RG 300Ω PACKAGE MECHANICAL DATA A F C E G B D H Φ3.7-3.9mm Dimensions Millimeters InchesRef. A B C D E F G H 4.40 0.61 0.46 1.21 4.60 0.88 0.70 1.32 0.173 0.024 0.018 0.048 0.181 0.035 0.028 0.052 2.40 2.72 9.80 28.0 29.8 1.102 1.173 1.14 1.70 0.045 0.067 0.094 0.107 8.60 9.70 2.40 0.094 0.339 0.382 10.4 0.386 0.409 6.25 6.85 0.246 0.270 2.65 2.95 0.104 0.116 45° 45° 3.45 0.136 2.70 0.106 4.05 0.159 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 4of 4