HS012Q

HS012Q HUIXIN | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

HS012Q 1.25A Sensitive SCR Rev.01 DESCRIPTION: The HS012Q SCR provides high dV/dt rate with strong resistance to electromagnetic interface. It is especially recommended for use on residual current circuit breaker, straight hair, igniter etc. Package SOT-223 is RoHS compliant. MAIN FEATURES Symbol Value Unit IT(RMS) 1.25 A VDRM /VRRM 1200 V IGT ≤200 μA ABSOLUTE MAXIMUM RATINGS Parameter Symbol Value Unit Storage junction temperature range Tstg -40-150 ℃ Operating junction temperature range Tj -40-110 ℃ Repetitive peak off-state voltage (Tj=25℃) VDRM 1200 V Repetitive peak reverse voltage (Tj=25℃) VRRM 1200 V Average on-state current (TC≤66℃) IT(AV) 0.8 A RMS on-state current (TC≤66℃) IT(RMS) 1.25 A Non repetitive surge peak on-state current (tp=10ms , Tj=25℃) ITSM A Non repetitive surge peak on-state current (tp=8.3ms , Tj=25℃) 22 I2t value for fusing (tp=10ms , Tj=25℃) I2t 2 A2s Critical rate of rise of on-state current (IG=2×IGT , f=100Hz , Tj=110℃) dI/dt 100 A/μs Peak gate current (tp=20μs, Tj=110℃) IGM 1 A Average gate power dissipation (Tj=110℃) PG(AV) 0.1 W 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 1of 5

(Tj=25℃; non-repetitive,off-state;FIG.8) Vpp 1 kV ELECTRICAL CHARACTERISTICS (Tj=25℃ unless otherwise specified) Symbol Test Condition Value Unit MIN. TYP. MAX. IGT VD=12V RL=33Ω - 50 200 μA VGT - 0.6 0.8 V VGD VD=VDRM Tj=110℃ 0.2 - - V IL IG=1.2 IGT - - 4 mA IH IT=0.05A - - 3 mA dV/dt VD=800V Tj=110℃ RGK=1KΩ 1000 - - V/μs VD=800V Tj=110℃ RGK=220Ω 1500 - - ton IG=10mA IA=20mA IR=2mA Tj=25℃ - 2 - μs toff - 50 - μs STATIC CHARACTERISTICS Symbol Parameter Value(MAX.) Unit VTM IT=1.5A tp=380μs Tj=25℃ 1.45 V VTO Threshold voltage Tj=110℃ 0.85 V RD Dynamic Resistance Tj=110℃ 0.16 Ω IDRM VD=VDRM VR=VRRM Tj=25℃ 5 μA IRRM Tj=110℃ 0.15 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth(j-c) junction to case (DC) 25 ℃/W Rth(j-a) junction to ambient (DC) 130 ℃/W 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 2of 5

FIG.1 Maximum power dissipation versus RMS on-state current FIG.2: RMS on-state current versus case temperature 0.5 1.5 2.5 P(W) IT(RMS) (A) 66℃ 0.2 0.4 0.6 0.8 1.2 1.4 0 22 44 66 88 110 IT(RMS) (A) TC(℃) FIG.3: RMS on-state current versus ambient temperature (printed circuit board FR4,copper thickness:35μm)(full cycle) FIG.4: Surge peak on-state current versus number of cycles 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 22 44 66 88 110 IT(RMS) (A) Ta(℃) ITSM(A) Number of cycles Tc=25℃,tp=10ms,one cycle,half-sine FIG.5: On-state characteristics FIG.6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of I2t (dI/dt<100A/μs) 0.1 0 0.5 1 1.5 2 2.5 3 ITM(A) VTM(V) Tj=25℃typ Tj=25℃max Tj=110℃typ dI/dt ITSM I2t 100 1000 0.01 0.1 1 10 ITSM(A), I2t(A2s) tp(ms) 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 3of 5

FIG.7: Relative variations of gate trigger current, holding current and latching current versus junction temperature 0.5 1.5 2.5 -40 -20 0 20 40 60 80 100 120 Tj(℃) IGT,IH,IL(Tj)/IGT,IH,IL(Tj=25℃) IGT IL&IH FIG.8：Test circuit for inductive and resistive loads to IEC-61000-4-5 standards. AC INPUT Filtering Unit IEC61000-4-5 Standards Surge Generator 1.2/50μS voltage surge 8/20μS current surge RGen Load Model R 30Ω L 53μH RG 1kΩ 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 4of 5

Reflow Condition Pb-Free assembly (see figure at right) Pre Heat -Temperature Min (Ts(min)) +150℃ -Temperature Max(Ts(max)) +200℃ -Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL)to peak) 3℃/sec. Max Ts(max) to TL - Ramp-up Rate 3℃/sec. Max Reflow -Temperature(TL) (Liquidus) +217℃ -Temperature(tL) 60-150 secs. Peak Temp (Tp) +260(+0/-5)℃ Time within 5℃of actual Peak Temp (tp) 20-40secs. Ramp-down Rate 6℃/sec. Max Time 25℃ to Peak Temp (TP) 8 min. Max Do not exceed +260℃ Reflow condition Temperature TS(min) TS(max) TL TP tp tL time to peak temperatue Time (t 25℃ to pea k) Ramp-up Ramp-down Preheat Critical Zone TL to TP ts PACKAGE MECHANICAL DATA Dimensions Millimeters InchesRef. A H J 1.5 2.9 0.6 1.8 3.1 0.8 0.059 0.002 0.114 0.024 0.071 0.122 0.031 0.22 0.32 3.3 6.7 7.3 0.264 0.287 0.009 0.013 6.3 6.7 0.248 0.264 3.7 0.130 0.146 1.5 2.0 0.059 0.079 K B C D E G F 0.06 1.6 0.01 0.10 3.0 0.7 0.26 6.5 3.5 4.4 2.2 1.75 7.0 0.9 0.063 0.118 0.028 0.010 0.256 0.138 0.173 0.087 0.069 0.276 0.035 0.001 0.004 0.5 1.0 0.020 0.039 A C D E F G H J K B 0.8 1.0 0.0390.031 4.8 0.189 2.4 0.094 3 of 1Page 1.0Rev. huixin@hxkj.hk+86-769-22857832 huixin@hxkj.hk+86-769-22857832Rev. 1.0 Page 5of 5