W-FL2 HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
2.0mm 2.0mm Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height W.FL2 Series 2008.2 I Features 1. Nominal mated height of 1.18 mm (Max. 1.3 mm) 2. Small board footprint As with W. FL Series, the receptacles occupies an area of 3.4 mm_ and share the same land pattern. Note: The W. FL2 Series and the W. FL Series are not compatible. 3. Extremely light weight Receptacle weight of 5.0 mg and plug weight of 17.4 mg makes the connectors one of the lowest weights on the market 4. Accepts high frequency transmission of DC to 6 GHz 5. Automatic board placement Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment. 6. Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable Standard ultra- fine coaxial cable of 0.81 mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections. 7. Simple connector mating / un-mating Use of the available mating / un-mating tools assures correct connection / disconnection of the plug and receptacle. I Applications Mobile phones, wireless LAN related applications, Bluetooth protocol devices, PDA, GPS, wireless communication devices, electronic measuring instruments and any application requiring high frequency transmission using ultra-small coaxial connectors. NEW W. FL2 Series W. FL Series [MAX1.55] 1.4 1.18 [MAX1.3] W.FL2 Plug (with 0.81mm dia. cable) W.FL2 Plug (with 0.81mm dia. cable) W. FL SeriesW. FL2 Series W.FL2-R-SMT-1 W.FL-R-SMT-1
3.3 Cable
W.FL2 Plug Ø0.81 1.18 [MAX1.3] W.FL2-R-SMT-1 Receptacle Mated height comparison (with W.FL Series) Occupied Mounting Area W. FL2 Plug and Receptacle The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesGUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height ISpecifications Rating Nominal characteristic impedance 50ø Operating temperature range -40°C to +90°C (RH 90% max.) Frequency range DC to 6 GHz Storage temperature range Item Specification 1. Contact resistance 20 mø max. (center contact), l0 mø max. (outer contact) 2. Insulation resistance 500 Mø min., 100 V DC 3. Withstanding voltage 200 V AC / 1 minute 1.4 max. (3 GHz to 6 GHz) *V.S.W.R. Measurement as shown on the block diagram below. Note: Verify connection and measurement setup. Note1. The term “storage” refers to products stored for long period of time prior to mounting and use. Note1:Cable assembly measurements with SMA conversion adapters mated with W.FL2 plug at each end of the 100cm long ultra-fine coaxial cable. Note2:Receptacles mounted on a 50 ohms glass epoxy board. Measurements were conducted with SMA conversion adapters attached. Network Analyzer Test Set Test Port TerminationD.U.T Test Post Cable -30°C to +70°C (RH 90% max.)Note 1 IMaterials Shell Phosphor bronze Silver plated Insulator PBT Color: Black, UL94V-0 Female center contact Phosphor bronze Gold plated Part Material Finish Shell Phosphor bronze Silver plated Insulator LCP Color: Black, UL94V-0 Male center contact Brass Gold plated Part Material Finish G Receptacle G Plugs – Right Angle IPlugs Plugs can be ordered only as terminated cable assemblies. 20.91 3.3 G Cable All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesGUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height I How to Specify Cable Assembly L (mm) Double-ended cable assembly L (mm) Single-ended cable assembly
Ordering Information
G Packaging Specifications 0.7 0.3 1.7
0.3 SIG
1.3 1.7 0.25 2.6 1.4 0.5 SIG GND No conductive traces in this area 1.3 1.3 1.5 0.65 W.FL2-R-SMT-1(10)ɿ ɹReel material: Corrugated board W.FL2-R-SMT-1(40)ɿ ɹReel material: Plastic Reel Dimensions Ø330 Ø330 BRecommended PCB mounting pattern (Note 1) Note 1: The land pattern is the same as that of the W. FL series connectors. Note 2: Recommended metal mask thickness: 0.1mm to 0.12mm Part Number CL No. W.FL2-R-SMT-1(10) W.FL2-R-SMT-1(40) 331-0315-4-10 331-0315-4-40 Packaging Reel (2,000 pieces per reel) Reel (5,000 pieces per reel) Weight/EA 5.0mg RoHS YES G Ordering Information GStandard tolerances for (L)** (L)(mm) Standard Tolerance (mm) *L=35 to 200 ±4 mm L=200 to 500 ±8 mm L=500 to 1000 ±12 mm L=Longer than 1000 mm / ±1.5% of (L) * Minimum available length (L) is 35mm Contact nearest HRS representative if different tolerances are required. * Contact Nearest HRS representative if one end requires preparation. -- -- -- -- (L)A[[ ]]04N2LPW.FL2 -- -- -- -- (L)A[[ ]]04NLPW.FL2 1 2 3 4 5 2 3 4 51 Series name W.FL2 Assembly type LP : Single ended 2LP : Double ended Cable type 04N: 0.81mm dia. ultra-fine coaxial cable Cable color 1: White, 2: Black Total length (mm) Length (L) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesGUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height IConversion Adapters Note: Used for performance measurements only. The W.FL mating side has lower retention force when mated with the corresponding part. Note: Used for performance measurements only. The W.FL mating side has lower retention force when mated with the corresponding part. Note:When mating with corresponding part (W.FL2-R- SMT-1) must be pressed down and held to make complete connection. G SMA Conversion Adapter (W.FL2/W.FL side plug – SMA side jack) G SMA Conversion Adapter G SMA Conversion Adapter (W.FL2 side jack – SMA side plug) IReceptacle Inspection Adapter (W.FL2/W.FL) Used for inspecting the performance parameters of the cable assembly. 8HEX(10.15) Part Number HRMP-W.FL2J CL No. RoHS YES311-0394-6 (4.05)6 1/4-36UNS-2A 13.8 Ø6.35 5.6 Part Number HRMJ-W.FLP(40) CL No. RoHS YES311-0368-6-40 (18.14) (4)6 1/4-36UNS-2A Ø6.35 5.5 (4.4) 1 (7.9) 4.2 12.1 M5∞0.5 7HEX Part Number HRMJ-W.FL2P-ST3 CL No. RoHS YES311-0417-0 Part Number W.FL-R-1 CL No. RoHS YES331-0483-9 All dimensions: mm All dimensions: mm All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesGUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height ITools (60) Mating end Unmating end Part Number W.FL2-LP-IN.OUT CL No. RoHS YESCL331-0321-7 (100) Ø108 Note: Can be used with W.FL or W.FL-LP(G) plugs. Part Number W.FL-LP-IN CL No. RoHS YESCL331-0323-2 G Plug - Mating G Plug - Mating /Unmating The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesGUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com IPrecautions 1. Plugs G Use of the extraction tool is absolutely mandatory. Any attempt of unmating by pulling on the cable may result in damage and affect the mechanical / electrical performance.
- Unmating
- Mating
- Plug (1) Recommended reflow temperature profile q The temperature of the printed circuit board surface temperature at the points of contact with the terminals. w Reflow soldering should be performed at a printed circuit surface temperature of 250°C max. e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations. (2) Recommended metal mask thickness (3) Reflow cycles 2. Receptacles 100 120 140 160 180 200 220 240 260 [ç] Preheat (130 to 180ç) 230ç 220ç 50 seconds max. 120 seconds max. 60 seconds max. Time 250 ç max. for 10 seconds (1) Mating / unmating (3) Precautions q Align the mating tool W.FL-LP-IN or the mating end of the tool W.FL2-LP-IN.OUT over the plug end of the cable assembly. w Firmly place the tool over the plug until it is secured in the tool. e Place the plug cable assembly (held in the tool) over the corresponding receptacle. r Assuring that the plug and receptacle are aligned press-down perpendicular to the mounting surface until both connectors are fully mated. t Remove the mating tool by carefully pulling it up.Removal of the tool qTo disconnect connectors, insert the extraction side of insertion and extraction jig W.FL2-LP-IN.OUT and perform as described in the diagram below. Do not twist connectors excessively during mating / unmating. 3FNPWBM DPNQMFUF *OTFSUUIFFYUSBDUJPOTJEFPGUIF8'- -1*/UPPMVOEFSUIFNBUFEQMVHBUUIF DBCMFDPOOFDUJPOTJEF BTTIPXO 5JMUUIFUPPMBTTIPXO BOEMJGUUIFQMVHDBCMF BTTFNCMZ qw *OTFSUJPOUPB8'-SFDFQUBDMF8'-1MVHQJDLVQ 3FNPWBMPG UIFUPPM W.FL2-LP-040 (Plug) W. FL2-R-SMT-1: qwert Do NOT apply any pull forces after the bending of the cable. (2) Pull forces on the cable after connectors are mated 0.1 mm to 0.12 mm 2 times (1) Operating environment The connectors are NOT designed to operate in the following environments:
- Exposed to a excessive amounts of fine particles and dust
- Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
- Environments having large rapid variations in temperature. (2) Storage conditions - Receptacle Store in the Hirose Electric packaging. Temperature: -10 to +40ç, Humidity: 85% max. Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. 3. Operating environment and storage conditions W.FL2-LP-040 2 N max. W.FL2-R-SMT-1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.