HRF-SW1030 HONEYWELL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SP6T Absorptive RF Switch DC to 2.5GHz Operation The Honeywell HRF-SW1030 is a high performance single pole six throw (SP6T) absorptive RF switch ideal for use in wi reless basestation and handset applications that require minimum power and minimum insertion loss. The HRF-SW1030 is manufactured with Honeywell's patented Silicon On Insulator (SOI) CMOS technology, which provides the performance of GaAs with the economy and integration capabilities of conventional CMOS technology. These switches are DC coupled to improve lower operating frequency, frequency response and reduce the number of DC bias points required.

FEATURES

  • Typical High Isolation Of > 42 dB @ 2 GHz
  • Typical Low Insertion Loss Of 1.6 dB @ 1 GHz
  • Integrated CMOS Control Logic
  • DC-coupled, bi-directional RF Path
  • Single Positive Supply Voltage
  • Ultra Small VQFN Packaging
  • Impedance matched for 50 Ohm systems
  • Lead-free, RoHS compliant and Green RF ELECTRICAL SPECIFICATIONS @ + 25oC Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohms Contact Honeywell for relative performance at other supply configurations Parameter Test Condition Frequency Minimum Typical Maximum Units Insertion Loss

1.0 GHz

2.0 GHz

2.5 GHz

1.6 2.1 2.4 2.5 3.3 3.8 dB dB dB Isolation

3.0 GHz

Input P1dB VSS =Gnd VSS = -5V

1.0 GHz 16

Two-Tone Inputs, + 5 dBm VSS = Gnd VSS = -5V Trise, Tfall Ton, Toff 10% To 90% 50% Cntl To 90% / 10% RF 10 ns ns HRF-SW1030 in VQFN Package

2 www.honeywell.com/microwave DC ELECTRICAL SPECIFICATIONS @ + 25°C Parameter Minimum Typical Maximum Units VDD 3.3 1 5.0 5.5 V VSS -5.0 V IDD <5 35 uA CMOS Logic Level (0) 0 0.8 V CMOS Logic Level (1) V DD – 0.8 V DD V Input Leakage Current 10 uA Note 1 - Performance curves are for VDD = +5.0 +/- 10% ABSOLUTE MAXIMUM RATINGS1 Parameter Absolute Maximum Units VDD +6.0 V VSS -5.5 V Vin Digital Logic 0 -0.6 V Vin Digital Logic 1 V DD + 0.6 V Input Power > 35 dBm ESD Voltage2 400 V Moisture Sensitivity Level Level 3 @ 260 OC Operating Temperature Range -40 to +85 °C Storage Temperature Range -65 to +125 °C Note 1 - Operation of this device beyond any of these parameters may cause permanent damage. Note 2 - Although the HRF-SW1030 contains ESD protection circui try on all digital inputs, precautions should be taken to ensure that the Absolute Maximum Ratings are not exceeded. Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1030 is immune to latch-up. TRUTH TABLE C2 C1 C0 RF Output RF Output RF Output RF Output RF Output RF Output RFINPUT RFINPUT RFINPUT RFINPUT RFINPUT RFINPUT "0" = CMOS Low, "1” = CMOS High Note: For codes 000 and 111 all outputs are in the terminated isolation state. PIN CONFIGURATIONS Pin Function Pin Function Pin Function

1 GROUND 7 VDD 13 GROUND 19 GROUND

2 GROUND 8 C2 14 GROUND 20 GROUND

3 RFOUTPUT5 9 C1 15 RFOUTPUT2 21 RFINPUT

4 GROUND 10 C0 16 GROUND 22 GROUND

5 GROUND 11 VSS 17 GROUND 23 GROUND

6 RFOUTPUT4 12 RFOUTPUT3 18 RFOUTPUT1 24 RFOUTPUT6

Note: Bottom ground plate must be grounded for proper RF performance.

www.honeywell.com/microwave 3 PERFORMANCE CURVES Insertion Loss Typical SW1030 Insertion Loss -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 Frequency (GHz) Insertion Loss (dB) Isolation Typical SW1030 Isolation -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 00 . 511 . 522 . 5 Frequency (GHz) Isolation (dB)

4 www.honeywell.com/microwave PACKAGE OUTLINE DRAWING GREEN MATERIAL SET The –GR switches have a Green material set that can withstand a maximum soldering temperature of 260OC. LEAD FINISH The package leads are Nickel Palladium Gold (NiPdAu). The configuration being manufactured and delivered today is lead-free RoHS compliant. Compliant packages have half-etch leadframes and have date codes of 0300 or greater. LEAD FREE QFN SURFACE MOUNT APPLICATION Please see Application Note AN310 for assembly process recommendations. The maximum soldering temperature of the -GR is 260 oC (-AU switches are 250 oC). Application Notes can be found at our website: www.honeywell.com/microwave CIRCUIT APPLICATION INFORMATION These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input and output without a DC ground reference provided as part of the circuit. See Application Note AN311. Notes 1. Pin 1 identifier can be a combination or a dot and/or chamfer. 2. Dim ensions are in millimeters.

www.honeywell.com/microwave 5 EVALUATION CIRCUIT BOARD Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply connect power; DC and RF signals to be measuring switch performance in less than 10 minutes. EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS Item Description PCB Impedance Matched Multi-Layer FR4 Attenuator HRF-SW1030 Digital Attenuator Chip Capacitor Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V RF Connector Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector DC Pin Mil-Max Model 800-10-064-10-001 Header Pins

ORDERING INFORMATION

Ordering Number Delivery Method Units Per Shipment HRF-SW1030-GR-TR HRF-SW1030-GR-T HRF-SW1030-E Tape & Reel Tape Evaluation Board

2500 Units per Reel

< 2500 One Board Per Box The new –GR switches will replace and are fully back-compatible with the –AU switches. The –AU switches are obsolete. FIND OUT MORE For more information on Honeywell’s Microwave Products visit us online at www.honeywell.com/microwave or contact us at 800-323-8295 (763-954-2474 internationally). Honeywell reserves the right to make changes to improve reliabi lity, function or design. Honeywell does not assume any liabilit y arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. Honeywell

12001 Highway 55

Plymouth, MN 55441 Tel: 800-323-8295 www.honeywell.com/microwave Form #1030W September 2007 ©2007 Hone ywell International Inc. HRF-SW1030 Evaluation Board HRF-SW1030 Evaluation Board Top View HRF-SW1030 Honeywell RF Out5 RF Out1 RF Input RF Out3 Gnd VDD VSS Gnd RF Out4 RF Out2 RF Out6