HR34B-12WRB-10PD

HR34B-12WPA-10S-X HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Push-on Bayonet Lock Miniature Waterproof Connector HR34B Series 2010.52 IFeatures 1. Water and dust protection

• IP67 water and dust protection rating when fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. Easy and precise mating
• Mating: Just inserting plug unit completes mating Unmating: Rotating sleeve counterclockwise unlocks connectors (fig.1)
• Marking helps align plug with receptacle when mating.
• 3 guide keys make blind mating possible. (Receptacle structure prevents plug from damaging receptacle terminals) 3. Multi-directional cable exit Right angle plugs allow the cable to exit in 8 directions, in 45˚ increments.(fig.2) 4. Safty standards The 4-position connectors meet requirements of T ¨UV standard. 5. Wide variation Mating : Just inserting plug unit will complete mating Un-mating : Rotating sleeve to unlock mating Push-on Bayonet Lock 45˚ Cable exit directions NEW Item Number of positions Connector type Terminations(plug) Terminations(receptacle) Conduit material Applicable cable size 4,10 straight plug,right angle plug,receptacle solder,crimp panel mount through-hole,wire solder plastic,metal fig.1 fig.2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector ISpecifications

1 A DC

500 V DC

10 pos.: 900 V AC / 1 minute 4 pos. : 2,000 V AC / 1 minute 30 mø max. 1,000 Mø min. No flashover or insulation breakdown 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage SpecificationItem Conditions Insulation resistance: 50 Mø min. (at high humidity) Insulation resistance: 500 Mø min. (when dry) No water penetration when submerged for 48 hours at the depth of 1.8 meters. 500 cycles No electrical discontinuity of 10 µs or longer Contact resistance: 30 mø max. Insulation resistance: 500 Mø min. Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm, 98m/s2 each, 3 hours in 3 axis. Temperature :-55°C / +15° to +35°C/ +85°C / +15° to +35°C Time :-30 min. / 10 to 15 min. / 30 min. / 10 to 15 min. 5 cycles 336 hours at 71°C, and humidity of 95% Acceleration of 490 m/s2, 11 ms duration, 3 axis, each for 3 hours No electrical discontinuity of 10 µs or longer4.Vibration 5.Shock 6.Durability (Mating / un-mating) 7.Temperature cycle 8.Humidity 9.Water protection Current rating Voltage rating Ratings 10 pos.: 200 V AC, 250 V DC 4 pos. : 200 V AC, 200 V DC (contamination level 3)

400 V AC, 400 V DC (contamination level 2)

10 pos.: 3 A 4 pos.:5 A Operating temperature range Storage temperature range -25°C to 125°C -25°C to 85°C IMaterials Remarks UL94V-0 Part Material Finish Outer shell Insulator O-ring Male contacts Ground contact 10 pos. 4 pos. 10 pos. 4 pos. Zinc alloy PPS Copper alloy Brass Brass Fluororubber Gold plated Silver plated Gold plated Silver plated Black chromate finish (Cr +3) Color: Black GReceptacles Remarks UL94V-0 Part Material Finish Outer shell O-ring Gasket Insulator Female contacts 10 pos. 4 pos. Zinc alloy, aluminum alloy, and polyamide resin (black) Fluororubber, Nitrile hydride rubber PPS Black chrome plating, black chromate finish (Cr +3) Color: Black Phosphor bronze Copper alloy Gold plated Silver plated GPlugs The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector Number of contact : Number of contacts. (Excluding ground contacts) Contact type S : Female wire solder SC : Female crimp Keying Blank: Standard X : X key position Other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u I Ordering information 1 52 3 4 6 7 8 GPlugs Series name : HR34B Series Shell size : Diameter(mm) of the mating interface of the plug Shell style WP : Straight plug WLP : Right-angle plug Conduit material and Applicable cable size A:Conduit material metal, Applicable cable Ø5.3~7.3 B:Conduit material metal, Applicable cable Ø6.5~8.0 D:Conduit material plastic, Applicable cable Ø5.7~7.3 E:Conduit material plastic, Applicable cable Ø6.5~8.0 K:Conduit material metal, Applicable cable Ø8.0~9.0(under development) 1 5 Number of contact :Number of contacts. (Excluding ground contacts) Contact type P : Male,wire solder PD: Male,through hole contact Keying Blank: Standard X : X key position Other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u 1 52 3 4 6 7 8 GReceptacles Series name : HR34B Series Shell size : Diameter(mm) of the mating interface of the plug Shell style WR : Receptacl Shell type Blank : Rectangular flange type for 10 positions A : Square flange for 10 positions B : Square flange for 4 positions 1 5 Conductor size : AWG#20 - 25 Plating 1:Gold plated HR34B - SC1 - 2 1 1 1 2 43 5 GCrimp contacts Series name : HR34B Series Contact style : SC1:Female contact Contact type 1 : 100pcs.per bag 2 : 10,000pcs per reel 1 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector Ø19 A IStraight plugs Part Number HR34B-12WPD-10S HR34B-12WPE-10S HR34B-12WPD-4S HR34B-12WPD-4S-X HR34B-12WPE-4S HR34B-12WPE-4S-X HRS No. A 134-0026-0-00 134-0027-2-00 134-0020-3-00 134-0023-1-00 134-0025-7-00 134-0031-0-00 Ø7.4 Ø8.5 Ø7.4 Ø8.5 Applicable cable diameter range Solder cup inner diameter All dimensions: mm Ø1.7 Ø5.7~7.3 Ø6.5~8.0 Ø5.7~7.3 Ø6.5~8.0 Part Number HR34B-12WPA-10S(71) HR34B-12WPB-10S(71) HR34B-12WPK-10S HRS No. A 134-0004-7-71 134-0007-5-71 Under development Ø7.4 Ø8.5 Ø9.5 Applicable cable diameter range Solder cup inner diameter All dimensions: mm Ø5.7~7.3 Ø6.5~8.0 Ø8.0~9.0 Part Number HR34B-12WPD-10SC HR34B-12WPE-10SC HRS No. A 134-0037-6-00 134-0038-9-00 Ø7.4 Ø8.5 Applicable cable diameter range Ø5.7~7.3 Ø6.5~8.0 Part Number HR34B-12WPA-10SC HR34B-12WPB-10SC HR34B-12WPK-10SC Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. HRS No. A 134-0017-9-00 134-0028-5-00 Under development Ø7.4 Ø8.5 Ø9.5 Applicable cable diameter range Ø5.7~7.3 Ø6.5~8.0 Ø8.0~9.0 GStandard type (Conduit material :Plastic) N Wire solder N Wire solder N Crimp (separate contacts required) GCrimp (separate contacts required) GRobust type(Conduit material :Metal) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector IRight angle plugs GStandard type (Conduit material : Plastic) 33.5 Ø19 BA Part Number HR34B-12WLPD-10S HR34B-12WLPE-10S HR34B-12WLPD-4S HR34B-12WLPD-4S-X HR34B-12WLPE-4S HR34B-12WLPE-4S-X HRS No. A B 134-0039-1-00 134-0040-0-00 134-0030-7-00 134-0034-8-00 134-0035-0-00 134-0036-3-00 Applicable cable diameter range Solder cup inner diameter All dimensions: mm Ø1.7 Ø5.7~7.3 Ø6.5~8.0 Ø5.7~7.3 Ø6.5~8.0 Part Number HR34B-12WLPA-10S(71) HR34B-12WLPB-10S(71) HR34B-12WLPK-10S HRS No. A B 134-0005-0-71 134-0008-8-71 Under development Ø7.4 Ø8.5 Ø9.5 30.5 31.5 Applicable cable diameter range Solder cup inner diameter All dimensions: mm Ø5.7~7.3 Ø6.5~8.0 Ø8.0~9.0 Part Number HR34B-12WLPD-10SC HR34B-12WLPE-10SC HRS No. A B 134-0041-3-00 134-0042-6-00 Ø7.4 Ø8.5 30.85 Applicable cable diameter range Ø5.7~7.3 Ø6.5~8.0 Part Number HR34B-12WLPA-10SC HR34B-12WLPB-10SC HR34B-12WLPK-10SC Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. HRS No. A B 134-0018-1-00 134-0029-8-00 Under development Ø7.4 Ø8.5 Ø9.5 30.5 31.5 Applicable cable diameter range Ø5.7~7.3 Ø6.5~8.0 Ø8.0~9.0 N Wire solder N Wire solder N Crimp (separate contacts required) GCrimp (separate contacts required) GRobust type (Conduit material :Metal) Ø7.4 Ø8.5 Ø7.4 Ø8.5 30.85 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector IReceptacles N Wire solder 1 3 4 7 8 10 A A B B 4-Ø3.2 4-(R2.8) 3.3 5.8 8.55 20 32.4 4-Ø3.2 13.4 Part Number HR34B-12WRA-10P HR34B-12WRB-4P HR34B-12WRB-4P-X O ring for water proof is not attached. Please find appropriate one from the market. O ring for water proof is not attached. Please find appropriate one from the market. HRS No. A B 134-0016-6-00 134-0021-6-00 134-0024-4-00 Solder cup inner diameter All dimensions: mm Ø1.3 Part Number HR34B-12WR-10PD(71) HRS No. 134-0003-4-71 N Through hole 17.26 18.26 23.4 25.4 ICrimp contacts N Female 1.2 Part Number Packaging HR34B-SC1-111 HR34B-SC1-211 100 pcs. per bag 10,000 pcs. per reel Note: Use wire with a jacket diameter of 1.7mm max. CL No. 134-0051-7-00 134-0050-1-00 Applicable conductor AWG #20 - 25 (Stranded wire) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector IConnector Mating Combinations Straight, Wire Solder (Standard key position) HR34B-12WPD-4S HR34B-12WPE-4S Wire solder (Standard key position) HR34B-12WRB-4P Wire solder (X key position) HR34B-12WRB-4P-X Right angle, Wire Solder (Standard key position) HR34B-12WLPD-4S HR34B-12WLPE-4S Straight, Wire Solder (X key position) HR34B-12WPD-4S-X HR34B-12WPE-4S-X Right angle, Wire Solder (X key position) HR34B-12WLPD-4S-X HR34B-12WLPE-4S-X 4 pos. Plugs 4 pos. Receptacles Standard key position X key position X key position Standard polarizing key Straight, Wire Solder or Crimp (Standard key position) HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC HR34B-12WPK-10S,10SC Right angle, Wire Solder or Crimp (Standard key position) HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC HR34B-12WLPK-10S,10SC Wire Solder HR34B-12WRA-10P Through hole HR34B-12WR-10PD 10 pos. Plugs 10 pos. Receptacles The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector IApplicable tools Description Part Number CL No. Applicable contact Applicable cable Manual contact crimping tool Press Applicator Contact extraction tool HT304/HR34B-1 CM-105 AP105-HR34B-1 RP6-SC-TP 150-0107-9 901-0005-4 901-2051-2 150-0039-0 HR34B-SC1-111 HR34B-SC1-211 HR34B-SC1-111 HR34B-SC1-211 AWG20,AWG23,AWG25 AWG20 to AWG25 GManual contact crimping tool GPress CM-105 (Applicator ordered separate) GContact extraction tool IIllustrations of mated connectors. A (33.5) B Straight plug Mating combinations 10 pos.plug + receptacle through-hole 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder B 49.6 50.1 49.6 10 pos. plug shell A,B type. 10 pos. plug shell D,E type. 10 pos. plug shell K type. 4 pos.plug + receptacle wire solder Plug + receptacle through-hole Plug + receptacle wire solder Plug + receptacle through-hole Plug + receptacle wire solder Plug + receptacle through-hole Plug + receptacle wire solder A 31.0 31.5 31.3 31.8 32.0 32.5 31.3 Right-angle plug Mating Combinations The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector BRecommended panel cutouts GReceptacle - wire solder ØE ØD C A A 4-B GReceptacle - through hole 4-M3∞0.5(1.3) (2.3)(xxx) (22.4) (13.6) (13.4) (18) (32.4) (13.4) 4-(R5.2) O-ring (Not supplied, cross-section diameter 1.78 , inner diameter 20.35) Outline of the O-ring BPCB mounting pattern GReceptacle - Through hole 1 3 8 10 2.15 Alignment mark 10-Ø0.9 +0.1 0 170°±30 2.4 2.4 5.5 2.15 2-Ø1.4 (Positioning post) Note 3 +0.05 4.4 1.2 3.6 1.2 3.6 Ø1 (Ground terminal) +0.1 0 A B C D E Part Number HR34B-12WRA-10P HR34B-12WRB-4P HR34B-12WRB-4P-X Recommended O ring dia. Cross-section 1.5 1.5 diameter 11.5 15.5 HR34B-12WRA-10P HR34B-12WRB-4P HR34B-12WRB-4P-X 17.26±0.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.26±0.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 M3∞0.5 Notes 1: The receptacle panel cutout shows the view from the mating side of the connector. Note 1: The contact configuration shows the view from the mating side. Note 2: Tolerance of ±0.05 mm is recommended for the plated through hole location and diameter. Note 3: Not a plated-through holes. All dimensions: mm All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B SeriesGPush-on Bayonet Lock Miniature Waterproof Connector BReceptacle Contact Arrangement note.1 View direction:Mating surface of pin insert. note.2 mark is ground terminal. 10 8 312 6 5 213 81 0 4 pos.wire solder 10 pos.wire solder 10 pos.through hole BHandling BPrecautions 1. Mating 2. Un-mating Holding the plug by the outer shell (A) align the arrow on the plug with the alignment mark on the receptacle and push straight in. Rotate the locking collar counter-clockwise to a full stop and un- mate the plug from the receptacle. Plug Receptacle Mating position alignment marks A B Rotate counter-clockwise Locking collar 1. When disconnecting or inserting the connector, be sure to do so after turning off the power. 2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the mating mark of the receptacle). 3. Note that the display method of the mating mark will differ depending on the receptacle. 4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter. 5. Please consult Hirose Electric Sales for harness assembly procedure. Center line of the connector 1 mm max. Alignment mark When completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). If the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.