HR31 HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Interface Connectors for Factory Automation Network HR31 Series Complies with DeviceNet requirements 2014.12w ■ Features 1. DeviceNet Compliant Conforms to requirements of Factory Automation Network DeviceNet standards. Hirose products are distinct from products of made others, as described below. Feature Made by others Hirose HR31 Reduced number of termination operations Crimped to commercially available cap connectors, inserted into housing and fastened by screw. (*) Crimped and connected to terminal then fastened simply by inserting into housing. High density mounting Plug height : 15 mm Plug height is 10.2 mm, allowing use of less space when mounting several connectors Prevention of connection errors Contact positions not identifi ed. Permanently identifi ed contact positions Number of required operations to secure receptacle assembly to the board Connectors are attached by screws from the opposite side. No need for screws, built-in locking pin secures connector to the board * Although it is possible to terminate discrete cables with screws and not use a pin contact, however, there is the potential iss ue and concern for long-term reliability and problems. Therefore, most users prefer to use crimp contacts. 2. Screw-lock style The screw lock style connector features secure mating and a higher locking force retention. 3. Snap-lock Style The snap lock plug features a structure that creates a tactile click during mating. 4. Commercially available tools may be used Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted. 5. Protected contacts When installed, the crimped contacts are protected completely by the plug housing. This design eliminates the risk of damaging the contacts. 35.5 12 20 10.2 12 34 5 Total space occupied by mated assemblies With screw lock 15 10.2

  • Hirose HR31
  • Other manufacturer’s product Comparison of plug heights In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

HR31 Series●Interface Connectors for Factory Automation Network Product Specification Rating Current rating 12A (2.5mm2 wire) 10A (1.5mm2 wire) Operating temperature range -40ç to + 100ç Voltage rating 250V AC, 350V DC Storage temperature range -40ç to + 85ç Item Specifi cation Conditions 1.Contact resistance 5 mø max. 1A DC 2.Insulation resistance 1000 Mø min. 500 V DC 3.Withstanding voltage No fl ashover or insulation breakdown 2000V AC/one minute 4.Impulse withstanding voltage No fl ashover or insulation breakdown Standard waveform of 4KV, positive/negative, 3 times each 5.Vibration No electrical discontinuity of 10 µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 6. Durability (insertion/ withdrawal) Contact resistance: 10 mø max. 1000 cycles 7. Temperature cycle Insulation resistance: 1000 Mø min. Temperature: -40ç / Room temperature to +100ç / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles 8.Humidity Insulation resistance: 10 Mø min. (Humidity state) 100 Mø min. (Dry state) 96 hours at temperature of 40ç and humidity of 90% to 95% Materials Part Material Finish Remarks Plug Insulator PBT Color: Black or Green UL94V-0 Screw Steel Nickel plating ––––– Crimp contact Socket contact Contact area: phosphor bronze Termination area: copper Contact area: gold plating Termination area: tin plating ––––– Receptacle Insulator PBT Color: Black or Green UL94V-0 Male contact Brass Contact area: gold plating Termination are: gold plating ––––– Nut Steel Nickel plating ––––– Board retention pin Phosphor bronze Tin plating Board retention pin

  • Connector HR31 - SC - 1 1 1 (01)
  • Crimp contact Model name HR31 Connector type P: Plug R: Receptacle Contact type S: Female contact P: Male contact Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type Other specifications: A two-digit number such as (01) or (02)is added to indicate other specifications. Contact pitch 5.08mm Screw lock type Blank: With screw A: Without screw Number of contacts 5 Model name HR31 Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.2 to 1.65mm2 Plating type 1: Gold plating Other specifications: A two-digit number such as (01) or (02)is added to indicate other specifications. Contact type SC: female contact

Ordering information

HR31 - 5.08 P A - 5 S C (01) q q y w e r u t i o o we r t y ui

HR31 Series●Interface Connectors for Factory Automation Network Plug (with screw lock) 8.3 28.3 25.4 35.5 10.2 1 2345 Part No. HRS No. Weight Color HR31-5.08P-5SC(72) 131-0002-2 72 8g Green Crimp contact ØA 2.35 B B - B B Part No. HRS No. ØA Weight Contact plating Applicable conductor cross area (Note 2) HR31-SC-111(71) 131-0004-8 71 4 1g Gold 1.04 to 2.63mm HR31-SC-121(71) 131-0005-0 71 3.3 0.2 to 1.65mm Note 1: Packaging (100 pcs/pack) Note 2: For a multi-strand conductors Part No. HRS No. Weight Color Contact plating Board retention pin HR31-5.08R-5PDL(72) 131-0001-0 72 4g Black Gold WithHR31-5.08R-5PDL(75) 131-0001-0 75 Green Receptacle (Right angle through hole type with screw lock) HR31-5.08R-5PDL Connector mounting side 3.3 35.5 8.6 7.5 12 453 PCB mounting pattern

  • With screw lock 5-Ø1.6 +0.1 (Through hole) 7.5±0.05 5.08±0.05 5.08±0.05 Connector mounting side 10±0.05 2-Ø2.3 +0.1 (Through hole) (Board thickness =1.6) HR31-5.08P-5SC

Receptacle (Straight through hole type with screw lock) HR31-5.08R-5PD PCB mounting pattern

  • With screw lock Part No. HRS No. Weight Color Contact plating Board retention pin HR31-5.08R-5PD(76) 131-0003-5 76 4g Green Gold Without Connector mounting side B 12 4.3 35.5 8.6 3.8 3.8±0.05 Connector mounting side B (Board thickness =1.6) 5.08±0.05 5.08±0.05 5-Ø1.6 ɹ(Through hole)+0.1 HR31 Series●Interface Connectors for Factory Automation Network
  • Tools application procedures Manual crimp tool Contact removal pin 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm. Crimp position indicator Applicable crimp contact

2 HR31-SC-111

1.25 HR31-SC-121

  1. Contact removal/extraction Wiring errors can be corrected by removing the crimp contacts using the extraction tool and the following procedure. 1) Insert the extraction tool from the underside of connector and apply pressure onto the mold lance. (Fig.1) 2) While pressing on the mold lance, angle the extraction tool and release the disconnection prevention mechanism on the crimping contact. (Fig.2) 3) Remove the extraction tool. 4) Pull the wire rearward to disconnect and remove the contact. 21.25 Crimp position indicator Mold lance Mold lance Contact removal pin Contact removal pin Insertion direction Wire Wire Pull-out Tools Type Part No. HRS No. Manual crimp tool HR31-TC-01 902-1512-4 Contact removal pin HR31-SC-TP 150-0215-1 HR31 Series●Interface Connectors for Factory Automation Network

HR31 Series●Interface Connectors for Factory Automation Network Usage Precautions 1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads.

1.1 Recommended mounting panel dimensions (right angle through hole type)

1.2 Recommended mounting panel dimensions (straight through hole type)

  1. Insert the crimp contact into the plug in the direction shown below. 3. Use a number 0 cross drive bit to tighten the screw lock’s screw. 4. Assure that the circuit’s power is off when mating and un-mating connectors. A 7.8 3.2 5 min. Panel 16.6±0.1 Board +0.2 +0.2 +0.2 +0.2 3.2 5 min. Panel 16.6 ±0.1 0.2 B 2 +0.2 7.8 +0.2 +0.2 +0.2 Crimp contact Wire HR31-5.08R-5PD() Part No. B +0.2 +0.2 +0HR31-5.08R-5PDL() Part No. A The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 12/2014. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com Powered by TCPDF (www.tcpdf.org)