HR31-5.08PA-5SC HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Interface Connectors for Factory Automation Network HR31 Series Complies with Device Net requirements 2004.7 I Applications Power units and communications units of factory automation related devices 15 10.2 Comparison of plug heights (actual size) G Hirose HR31 G Other manufacturer’s product I Features 1. Device-Net Compliant Conforms to requirements of Factory Automation Network Device-Net standards. Hirose products are distinct from products of made others, as described below.
2 Locking features
The connectors can be supplied with either of the following locking features: -Screw lock, using attached screws. Snap lock, using built-in feature with a definite click-sensation. 3. Commercially available tools may be used Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted. 4. Prevention of deformation of the contacts When fully inserted, the plug contacts are fully protected by the walls of the insulator body eliminating a risk of accidental damage. 27.4 12 20 10.2 35.5 12 20 10.2 12345 12345 Total space occupied by mated assemblies Plug height is 10.2 mm, allowing use of less space when mounting several connectors Permanently identified contact positions Feature Made by others Hirose HR31 Reduced number of termination operations Number of required operations to secure receptacle assembly to the board High density mounting Prevention of connection errors Crimped to commercially available cap connectors, inserted into housing and fastened by screw. Connectors are attached by screws from the opposite side. No need for screws, built-in locking pin secures connector to the board Plug height : 15 mm Contact positions not identified. Crimped and connected to terminal then fastened simply by inserting into housing. With screw lock Without screw lock
Insulation resistance: 10 M ohms min. (Humidity state) 100 M ohms min. (Dry state) 100 cycles (1000 cycles for gold plated contacts) No electrical discontinuity of 10 µs or more 1A DC
500 V DC
Standard waveform of 4KV, positive/negative, 3 times each Temperature: -40ç / Room temperature to +100ç / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles 96 hours at temperature of 40çand humidity of 90% to 95% Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 5 m ohms max. 1000 M ohms min. No flashover or insulation breakdown No flashover or insulation breakdown Contact resistance: 10 m ohms max. Insulation resistance: 1000 M ohms min. 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Impulse withstanding voltage 8.Humidity 5.Vibration 6.Durability (insertion/ withdrawal) 7.Temperature cycle SpecificationItem Conditions Remarks UL94V-0 UL94V-0 Part Material Finish Plug Crimp contact Insulator Screw Socket contact Insulator Male contact Nut Board retention pin PBT Steel PBT Brass Steel Phosphor bronze Color: Black or Green Nickel plating Color: Black or Green Nickel plating Tin plating G Connector HR31 - SC - 1 1 3 (01) 9 10 11 12 13 G Crimp contact Series name HR31 Connector type P: Plug R: Receptacle
1 Contact type
S: Female contact P: Male contact Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type Color, plating, board retention pin type Contact pitch 5.08mm Screw lock type Blank: With screw A: Without screw 5 No. of contacts 5 Series name HR31 Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.25 to 1.65mm2
9 Plating type
3: Tin plating 1: Gold plating Suffix 12 14 Contact type SC: female contact Contact area: phosphor bronze Termination area: copper Contact area: tin plating Termination area: tin plating Available with gold plating on contact area Available with gold plating on contact area Contact area: tin plating Termination are: tin platingReceptacle Current rating Voltage rating Rating 12A (2.5mm2 wire) 10A (1.5mm2 wire) 250V AC, 350V DC Operating temperature range Storage temperature range -40ç to +100ç -40ç to +85ç (Note 2) I Materials I Ordering information HR31 - 5.08 P A - 5 S C (01) 1 2 3 4 5 6 7 8
I Plug (with screw lock) HR31-5.08P-5SC 8.3 28.3 25.4 35.5 10.2 12345 Tin Gold 1.04to 2.63mm 2 0.2 to 1.65mm 2 1.04to 2.63mm 2 0.2 to 1.65mm 2 131-0006-3-71 131-0007-6-72 131-0004-8-71 131-0005-0-72 3.3 3.3 HR31-SC-113 (71) HR31-SC-123 (72) HR31-SC-111 (71) HR31-SC-121 (72) Part No. CL No. WeightØA Contact plating Applicable conductor cross area (Note 2) Note 1: Bag packaging (100 pieces/bag) Note 2: For a multi-strand conductors Plug (without screw lock) HR31-5.08PA-5SC 8.3 28.3 25.4 10.2 12345 I Crimp contact ØA 2.35 B B - B B Black Green 131-0002-2-71 131-0002-2-72 HR31-5.08P-5SC(71) HR31-5.08P-5SC(72) Part No. CL No. Weight Color Black Green 131-0009-1 131-0009-1-01 HR31-5.08PA-5SC HR31-5.08PA-5SC(01) Part No. CL No. Weight Color
I Receptacle (Right angle through hole type with screw lock) HR31-5.08R-5PDL Contact plating 3.3 35.5 8.6 7.5 12 453 Black Green Tin Gold Tin Gold With Without With Without 131-0001-0-71 131-0001-0-72 131-0001-0-73 131-0001-0-74 131-0001-0-75 131-0001-0-76 HR31-5.08R-5PDL(71) HR31-5.08R-5PDL(72) HR31-5.08R-5PDL(73) HR31-5.08R-5PDL(74) HR31-5.08R-5PDL(75) HR31-5.08R-5PDL(76) Part No. CL No. Weight Color Contact plating Board retention pin Receptacle (Right angle through hole type without screw lock) HR31-5.08RA-5PDL 10.25 3.3 Contact plating 27.4 8.6 12 45 3 131-0008-9-71 131-0008-9-72 131-0008-9-73 131-0008-9-74 131-0008-9-75 131-0008-9-76 HR31-5.08RA-5PDL (71) HR31-5.08RA-5PDL (72) HR31-5.08RA-5PDL (73) HR31-5.08RA-5PDL (74) HR31-5.08RA-5PDL (75) HR31-5.08RA-5PDL (76) Part No. CL No. Weight BPCB mounting pattern G With screw lock G Without screw lock Black Green Tin Gold Tin Gold With Without With Without Color Contact plating Board retention pin Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 5-Ø1.6 +0.1 (Through hole) 7.5±0.05 5.08±0.05 5.08±0.05 Connector mounting side 10±0.05 2-Ø2.3 +0.1 (Through hole)(Note) (Board thickness =1.6) 2-Ø2.3 +0.1 (Through hole) 10±0.05 5.08±0.05 5.08±0.05 Connector mounting side 10.25±0.05 5-Ø1.6 +0.1 (Through hole) (Note) (Board thickness =1.6)
I Receptacle (Straight through hole type with screw lock) HR31-5.08R-5PD Connector mounting side B 4.312 35.5 8.6 3.8 12 45 3 Black Green Tin Gold Tin Gold With Without With Without 131-0003-5-71 131-0003-5-72 131-0003-5-73 131-0003-5-74 131-0003-5-75 131-0003-5-76 HR31-5.08R-5PD(71) HR31-5.08R-5PD(72) HR31-5.08R-5PD(73) HR31-5.08R-5PD(74) HR31-5.08R-5PD(75) HR31-5.08R-5PD(76) Part No. CL No. Weight Color Contact plating Board retention pin Receptacle (Straight through hole type without screw lock) HR31-5.08RA-5PD Connector mounting side B 27.4 8.6 4.312 12 45 3 131-0016-7-71 131-0016-7-72 131-0016-7-73 131-0016-7-74 131-0016-7-75 131-0016-7-76 HR31-5.08RA-5PD (71) HR31-5.08RA-5PD (72) HR31-5.08RA-5PD (73) HR31-5.08RA-5PD (74) HR31-5.08RA-5PD (75) HR31-5.08RA-5PD (76) Part No. CL No. Weight BPCB mounting pattern G With screw lock G Without screw lock Black Green Tin Gold Tin Gold With Without With Without Color Contact plating Board retention pin Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 5-Ø1.6 +0.1 0 (Through hole) 3.8±0.05 5.08±0.05 5.08±0.05 Connector mounting side B 2-Ø2.3 +0.1 0 (Through hole)(Note) (Board thickness =1.6) 2-Ø2.3 +0.1 0 (Through hole) 3.8±0.05 5.08±0.05 5.08±0.05 Connector mounting side B 5±0.05 5-Ø1.6 +0.1 (Through hole) (Note) (Board thickness =1.6)
G Tools application procedures Type CL No. Manual crimp tool Contact removal pin 150-0217-7 150-0215-1 I Tools Part No. HR31-TC-01 HR31-SC-TP Crimp position indicator 1.25 Applicable crimp contact HR31-SC-113 or HR31-SC-111 HR31-SC-123 or HR31-SC-121 Manual crimp tool Contact removal pin 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm. 2. Contact removal pin Contact removal pin provides easy method of contact removal from plug assembly. 1) Fully insert the long end of the contact removal pin into the opening in the insulator. 2) Move the pin forward, in the direction of the mating face. This will cause the terminated contact to move in opposite direction. 3) Pull out the wire with the attached crimped contact. 21.25 Crimp position indicator Molded-in lance Molded-in lance Contact removal pin Contact removal pin Insertion direction Wire Wire Pull-out
- To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads.
1.1 Recommended mounting panel dimensions (right angle through hole type)
1.2 Recommended mounting panel dimensions (straight through hole type)
- Insert the crimp contact into the plug in the direction shown below. 3. Use a number 0 cross drive bit to tighten the screw lock’s screw. 4. Assure that the circuit’s power is off when mating and un-mating connectors. A 7.8 3.2 5 min. Panel 16.6±0.1 Board +0.2 +0.2 +0.2 +0.2 3.2 5 min. Panel 16.6±0.1 0.2 B 2+0.2 7.8 +0.2 +0.2 +0.2 Crimp contact Wire 27.9 +0.2 +0.2 HR31-5.08R-5PDL HR31-5.08RA-5PDL Part No. A HR31-5.08R-5PD HR31-5.08RA-5PD Part No. B 27.9 +0.2 +0.2
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. USA: HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958 Fax : 1 805 522 3217 http://www.hiroseusa.com UNITED KINGDOM: HIROSE ELECTRIC UK LTD. Crownhill Business Centre 22 Vincent Avenue Crownhill, Milton Keynes MK8 OAB Phone : 44 1908 305400 Fax : 44 1908 305401 http://www.hirose.co.uk HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852 2803 5338 Fax : 852 2591 6560 GERMANY: HIROSE ELECTRIC GmbH Zeppelinstrasse 42 D-73760 Ostfildern Kemnat Phone : 49 711 4560021 Fax : 49 711 4560729 http://www.hirose.de KOREA: HIROSE KOREA CO., LTD. (#2NA311,Shihwa Industrial Complex), 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 82 31 496 7000,7124 Fax : 82 31 496 7100 http://www.hirose.co.kr TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : 886 2 2557 7351,7352 Fax : 886 2 2552 9851 THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Beechavenue 46.1119PV Schiphol-Rijk Phone : 31 20 6557460 Fax : 31 20 6557469 http://www.hiroseeurope.com CHINA: HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. 3705,Bund Center,222 Yan An Road(E),Shanghai 20002 Phone : 86 21 6335 2538 Fax : 86 21 6335 0767 SINGAPORE: HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza079903
Phone : 65 6324 6113 Fax : 65 6324 6123 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com NOTES :