HR30-6PA-6SC_1 HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Miniature Waterproof Plastic Connectors HR30 Series NEW 2006.5 I Features 1. Small size Short in length when fully terminated and mated. 2. Water and dust protected IP67 protection rating: Complete protection against dust penetration and against water penetration when submerged 1 meter deep for half hour. Mated with corresponding connector or protective cap. 3. Simple pull lock release Built-in lock/release mechanism securely locks mated connectors while allowing quick disconnection by simply pulling on the plug’s release collar. Molded-in grooves prevent hand slippage when pulled. The round configuration of the collar allows easy side-by- side panel mounting and will not snag on objects when the cable is pulled-out. 4. Light weight, corrosion resistant Glass reinforced thermoplastic compounds and non- corrosive components are used in all assemblies. 5. Contact protection and self- alignment Multiple polarizing keys protect the contacts from miss- alignment or attempted insertion of the wrong connector, while assuring correct mating between the corresponding connectors. 6. Visual alignment indicators Permanent alignment indicators in a contrasting color on all connectors aid in correct alignment and engagement. 7. Built-in cable strain relief I Applications Test and measuring equipment, portable devices, instrumentation, industrial devices, recreational equipment, I/O applications and other applications requiring use of lightweight, corrosion resistant quick mate/ release cable connections. Push-pull- single action lock Ø15.5 42.1 Ø12.6 32.3 3 and 6 pos. 10 and 12 pos. Mated dimensions Lock/release operation Alignment marks Polarized interface Push-pull locking collar The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5A (3 pos.) 2A (6,10,12 pos.) 100V AC,140V DC(3,6 pos.) 30V AC,42V DC(10,12 pos.) -25ç to +85ç -25ç to +85ç Operation Temperature Range StorageTemperature Range 1000M ohms min. No flashover or insulation breakdown Insulation resistance 100 M ohms min. No penetration inside. Insulation resistance 10M ohms min. (when humidity high) 100M ohms min. (when dry) Contact resistance 10m ohms min.(3 pos.) Contact resistance 30m ohms min. (Solder type: 6, 10, and 12 pos.) Contact resistance 100m ohms min. (Through hole type: 6 and 12 pos.) No electrical discontinuity of 10 µs or more 5m ohms max. (3 pos.) 15m ohms max. (Solder type: 6, 10, and 12 pos.) 30m ohms max. (Through hole type: 6 and 12 pos.) Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 1 cycle= 5min, 10 cycles in each of the 3 directions. 1A DC
100 V DC
300 V AC / one minute
96 hours at temperature of 40ohmsC and humidity of 90% to 95% 1.Contact resistance Insulation resistance 3.Withstanding voltage 4.Vibration 5.Durability (mating/un-mating) 6.Temperature cycle 7.Humidity resistance Waterproof performance 9.Dust protection Characteristic ConditionsSpecification Remarks UL94V-0 UL94V-0 UL94V-0 Material PPS PBT Polyacetal Silicone rubber, chloroprene rubber Brass, phosphor bronze Stainless steel PPS Chloroprene rubber Brass, phosphor bronze Zinc alloy Phosphor bronze Phosphor bronze Finish Assembly Component Plug Insulator Gasket Contacts Spring Insulator Gasket Contacts Hexagonal nut Washer Contacts Receptacles Crimp contact (male/female) Black Black Natural Red/Black Gold plated Black Black Gold plated Chromate Nickel plated Selective gold plated I Ordering information 1 52 3 4 6 7 8 Series name : HR30 1 Number of Contacts : 3, 6, 10 and 12 Contact type S : Female contact P : Male contact Contact wiring type Blank : Solder C : Crimping D : Through hole Plating (71) : Gold plated (Except caps) Shell size : Outside diameter/plug mating side Connector type : P : Plug Connector type :R : Receptacle Connector type :J : Jack Variation Blank : Standard A : Fine wire (-55ç: 30 minutes ¡ Room temperature: 10 to 15 minutes ¡ +85ç: 30 minutes ¡ Room temperature: 10 to 15 minutes) for 5 cycles While mated with corresponding or protective cap submerged at depth of 1m for half hour. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Applicable cable diameter range 4.2 to 5 3.5 to 4.3 6.2 to 7 I Plugs G Crimp Type G Solder Type Ø15.5 A(Fully tightened) Applicable cable diameter B A(Fully tightened) Applicable cable diameter Part Number HR30-6P-3S(71) HR30-6P-6S(71) HR30-6P-6P(71) HR30-6PA-3S (71) HR30-6PA-6S (71) HR30-6PA-6P (71) HR30-7P-12S(71) HR30-8P-12P(71) CL No. 130-0004-1-71 130-0010-4-71 130-0009-5-71 130-0021-0-71 130-0019-9-71 130-0020-8-71 130-0027-7-71 130-0026-4-71 Weight RoHSA B Solder pot inner diameter 1.1 mm 0.8 mm 1.1 mm 0.8 mm 29.8 30.3 29.8 30.3 HR30-7P-12SC (Shown) Shown with terminated and installed contacts. Note: Crimp contacts are not included. Please order applicable contacts separately. HR30-6P-6S (Shown) YES 6.7g Part Number HR30-7P-10SC (71) HR30-7P-12SC (71) HR30-8P-12PC (71) CL No. 130-0013-2-71 130-0014-5-71 130-0015-8-71 Weight RoHSApplicable cable diameter rangeA Crimp contact HR30-SC-211 HR30-PC-211 6.2 to 7 6g YES 12.6 39.8 15.5 0.6 mm 39.8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
C A D E(Thread) F(Hex nut) Lock washer 3 4 HR30-6R-6P (Shown) 18.4 Part Number HR30-6R-3P(71) HR30-6R-6P(71) HR30-6R-6S(71) HR30-7R-12P(71) HR30-8R-12S(71) CL No. Weight RoHS 130-1003-4-71 130-1009-0-71 130-1008-8-71 130-1016-6-71 130-1018-1-71 3.4g A 18.6 B 8.3 9.3 C 12 8.9 15 11.5 M8∞0.75 M11∞1 D E F Solder pot inner diameter 1.1mm 0.8mm 0.6mm G Through hole Type HR30-8R-12SD (Shown) 14.9 15.2 Part Number HR30-6R-6PD(71) HR30-6R-6SD(71) HR30-7R-12PD(71) HR30-8R-12SD(71) CL No. Weight RoHS 130-1020-3-71 130-1021-6-71 130-1017-9-71 130-1019-4-71 YES 3.4g A B 8.3 9.3 C 8.9 11.5 M8∞0.75 M11∞1 D E F D C A B 2 Through hole post (0.2∞0.5) E F(Hex nut) Gasket Lock washer G Crimp Type Ø11.5 Ø15 15.5
9.3 Gasket
M11X1(Thread) 13(Hex nut) Lock washer HR30-7R-12PC (Shown) Part Number HR30-7R-10PC (71) HR30-7R-12PC (71) HR30-8R-12SC (71) CL No. 130-1012-5-71 130-1013-8-71 130-1014-0-71 Weight RoHSCrimp contact HR30-PC-211 HR30-SC-211 3g YES YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
37.3 Ø15 (Fully tightened) Applicable cable diameter B(Fully tightened) A 3 4 Applicable cable diameter Part Number HR30-6J-6P(71) HR30-6JA-6P(71) HR30-7J-12P(71) HR30-8J-12S(71) CL No. A B 130-2009-6-71 130-2018-7-71 130-2020-9-71 130-2019-0-71 28.9 37.3 Weight RoHSApplicable cable diameter rangeSolder pot inner diameter 0.8 mm 0.6 mm HR30-7J-12PC (Shown) HR30-6J-6P (Shown) 4.2 to 5 3.5 to 4.3 6.2 to 7 Part Number HR30-7J-10PC(71) HR30-7J-12PC(71) HR30-8J-12SC(71) CL No. 130-2015-9-71 130-2017-4-71 130-2016-1-71 Weight RoHSApplicable cable diameter rangeCrimp contact HR30-PC-211 HR30-SC-211 6.2 to 7 5g YES 5.7g 5.9g Shown with terminated and installed contacts. Note: Crimp contacts are not included. Please order applicable contacts separately. YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.40.9 ØE C ØA ØB ØD 1 1.4 C ØA ØB ØD ØE B C D E 8.4 10.4 8.9 10.5 8.8 11.4 HR30-6R-C HR30-6P-C Part Number HR30-6P-C (71) HR30-7P-C (71) HR30-8P-C (71) CL No. 130-3000-7-71 130-3004-8-71 130-3003-5-71 Weight RoHSApplicable connector A HR30-6P-3S(71) HR30-6P-6S(71) HR30-6P-6P(71) HR30-6PA-3S(71) HR30-6PA-6S(71) HR30-6PA-6P(71) HR30-7P-10SC(71) HR30-7P-12S(71) HR30-7P-12SC(71) HR30-8P-12P(71) HR30-8P-12PC(71) YES B C D EPart Number HR30-6R-C (71) HR30-7R-C (71) CL No. 130-3001-0-71 130-3002-2-71 Weight RoHSApplicable connector A 15.5 14.8 8.5 15 12.1 1g YES HR30-6R-3P (71) HR30-6R-6P (71) HR30-6R-6PD (71) HR30-6R-6S (71) HR30-6R-6SD (71) HR30-7R-10PC (71) HR30-7R-12P (71) HR30-7R-12PC (71) HR30-7R-12PD (71) HR30-8R-12S (71) HR30-8R-12SC (71) HR30-8R-12SD (71) Note : When using these caps, do not use the gasket that is normally supplied with the receptacle. The “B” diameter end of the receptacle cap will serve as the gasket. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note : Use wire size AWG 26 to 30 with a jacket diameter of 1 mm max. I Crimp Contacts BConnecting Combinations 0.82 1.15 1.2 A-A cross-section A A 0.82 1.15 1.2 A A A-A cross-section Plugs HR30-*P-**(71) Caps for Plug HR30-*P-C(71) Receptacles HR30-*R-**(71) Jacks HR30-*J-**(71) Caps for Receptacle HR30-*R-C(71) Cable (Shown for reference only.) Cap Cap Panel (Shown for reference only.) Male contact Female contact CL No.Part Number Packaging type Weight RoHS 130-0022-3 130-0016-0 HR30-PC-111 HR30-PC-211 100pcs/bag 10,000pcs/reel 0.03g/1per pin 0.03g/1per pin YES Note 1 : When selecting connectors, take into account the shell size, contact count and gender of the contacts. Note 2 : When using the protective caps for the receptacles, do not use the gaskets normally supplied with the receptacle. Protective caps must be fully inserted to assure specified IP67 water and dust protection. CL No.Part Number Packaging type Weight RoHS 130-0023-6 130-0017-3 HR30-SC-111 HR30-SC-211 100pcs/bag 10,000pcs/reel 0.03g/1 pin 0.03g/1 pin YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
G Solder termination fixture Part Number HR30-6P-3S-T01 HR30-6P-6S-T01 HR30-6P-6P-T01 HR30-7P-10SC-T01 HR30-7P-12SC-T01 HR30-8P-12PC-T01 HR30-6R-3P-T01 HR30-6R-6P-T01 HR30-6R-6S-T01 HR30-7J-10PC-T01 HR30-7J-12PC-T01 HR30-8J-12SC-T01 CL No. 150-0220-1 150-0214-9 150-0221-4 150-0228-3 150-0223-0 150-0227-0 150-0225-5 150-0218-0 150-0222-7 150-0231-8 150-0230-5 150-0226-8 Applicable Connectors HR30-6P-3S(71) HR30-6PA-3S (71) HR30-6P-6S(71) HR30-6PA-6S (71) HR30-6P-6P(71) HR30-6PA-6P (71) HR30-7P-10SC (71) HR30-7P-12S(71) HR30-7P-12SC (71) HR30-8P-12P(71) HR30-8P-12PC (71) HR30-6R-3P (71) HR30-6R-6P (71) HR30-6J-6P(71) HR30-6JA-6P(71) HR30-6R-6S (71) HR30-7J-10PC(71) HR30-7J-12PC(71) HR30-8J-12SC(71) Note : The back shell tightening collar is used to tighten the back shell to the specified torque. Refer to assembly procedures. G Tightening collar for back shell Solder termination fixture Back shell tightening collar Part Number HR30-6P-T02 HR30-8P-T02 CL No. 150-0216-4 150-0224-2 Applicable Connectors 3 and 6 pos. 10 and 12 pos. Note: The back shell tightening collar is used to tighten the back shell to specified torque. Refer to assembly procedures. HR30-6P-6S-T01 HR30-6R-6P-T01 HR30-6P-T02 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BContact Position Arrangement BPanel Cutout Notes 1.The contact configuration depicts a view from the wiring side. 2. Mounting to the panel is accomplished by tightening the hexagonal nut from the rear side of the panel. 4567 89 10 1211 312 4567 8910 12 11 3123 4567 8910 HR30-7P-10SC(71) HR30-7P-12SC(71) HR30-8P-12PC(71) HR30-6P-6P(71)HR30-6P-6S(71)HR30-6P-3S(71) Alignment mark Alignment mark B +0.05 A +0.05 D +0.05 ØC+0.05 Manual contact crimping tool HT-102/HR30-1 Automatic contact crimping machine CM-105 Contact extraction tool HR30-TP Type Description Part Number CL No. Applicable contact Applicable wire Manual Automatic Extraction tool Manual crimping tool Automatic crimping machine Applicator HT-102/HR30-1 CM-105 AP105-HR30-1 HR30-TP 150-0229-6 901-0005-4 901-2015-9 150-0219-2 HR30-SC-111 HR30-PC-111 HR30-SC-211 HR30-PC-211 HR30-SC-111 HR30-SC-211 HR30-PC-111 HR30-PC-211 AWG #26~#30 AWG#26~#30 A B C D Panel Thishness 3,6 pos 10,12 pos 1.25 1.35 6.45 9.25 8.05 11.05 3.95 5.45 0.7 0.7~3 BReceptacle, Board Mounting Through Hole Pattern Notes 1.The receptacle through hole configuration depicts a view from the mating side of the connector. 2.The recommended board maximum thickness :1.2 mm. 3.Tolerance of +0.03 mm is recommended for the plated through hole location. Tolerance of +0.02 mm is recommended for the plated through hole diameter. 7R-12PD 8R-12SD 1.44 1.44 0.480.87 2.22 1.83 0.72 0.72 12-Ø0.65 2.16 2.16 12 11 10 8 6R-6SD 0.9 0.9 1.521.52 0.49 1.351.6 6-Ø0.65 6R-6PD 1.561.56 0.9 0.9 1.81.8 6-Ø0.65 3 4 0.9 0.9 1.44 1.44 0.480.87 2.22 1.83 0.72 0.72 12-Ø0.65 2.16 2.16 11 12 81 0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Solder termination fixture Insulator/contact assemblyBlock end face BAssembly Procedures Plug Assembly Sequence Thread the back shell, strain relief, seal bushing, spring and push/pull locking collar over the cable as shown above. Solder type 1. Pre-solder the exposed cable conductors (dia. A). The diameter of the pre-soldered conductors should not exceed 0.7 mm for 6 contact plug and 1.0 mm for 3 contact plug. 2. Insert the insulator body over the applicable solder termination fixture. 3. Insert the pre-soldered conductors in the contact soldering pot and solder them in place. Soldering iron temperature should be 280 ±10ç applied for 3-4 second. Crimp type 1. Crimp the applicable contact to the stripped conductor. Use correct crimp tools. Verify the dimensions and crimp configuration. 2. Insert the contact into the appropriate opening in the insulator body. 3. Verify fully seated position by applying a slight pull force on the conductor. The contact should remain in place. Re-insert if not seated. A B Solder type : 3 and 6 pos. Solder type : 12 pos. Crimp type : 10 and 12 pos. 2 mm 2 mm 2m m -0.5 5.5 mm max. 10 mm max. 15 to 20 mm B Seal bushing Strain relief Back shell Insulator/contact assembly Cable Spring Push/pull locking collar A The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A Push/pull locking collar Guide keys Cable Cable Solder termination fixture Tightening collar for back shell Cable Back shell Plug insulator body View A (2:1) Front edge of cable jacket Figure B Figure C Groove - sealing bushing 1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding. 2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown. 4. Using the correct back-tightening collar tighten the back shell to the specified torque. When tightening the collar make sure that the cable will NOT turn. 5. Remove the assembly from the fixture. Back shell tightening collar sizeTorque 3 and 6 Pos. 10 and 12 Pos. 16 mm 18 mm 0.5N.m 0.5N.m Connector Note: Loctite is a registered trademark of the Henkel Loctite Corporation. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
- Mating 2. Un-mating When mounting, smooth mating will be achieved by holding plug in any are “A” and aligning the arrow of the plug with that of the receptacle ,then pushing the plug straight in. When removing the plug from its connected condition, hold the plug by push/pull locking collar (area “B”) and pull straight off. D C Alignment marks C D Receptacle Mounting panel Plug Cable A B Push/pull locking collar Cable 1. Do NOT apply force in excess of 30N in the directions shown below. 2. To maintain the water/dust protection performance and the cable clamp force, use a cable that is within the range of applicable cable diameter. 3. Consult HRS representative when using different cables. Panel 30 N max. 30 N max. 30 N max. The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.