HR30-6P-6P-T01

HR30 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Features

1. Small-size with low profile 3, 6 contacts : Maximum outer diameter Ø12.6mm Mated length 32.3mm (from the panel surface) 10, 12 contacts : Maximum outer diameter Ø15.5mm Mated length 42.1mm (from the panel surface) These small, compact connectors offer unique features available only from Hirose. 2. Waterproof construction IP67 and 68 waterproof construction in the mated state IP67 : Left submerged in water at a depth of 1m for 30 minutes IP68 : Left submerged in water at a depth of 2m for 14 days 3. Push/pull lock Waterproof connectors feature an easy to operate push/pull locks developed with our exclusive technology. 4. Light weight 3 and 6 contacts: 6g (plug + receptacle) 10 and 12 contacts: 9g (plug + receptacle) 5. Clamp structure Our proprietary clamping method allows clamping the cable by simply tightening the cord ring. 6. Easy mating operation The plug can be securely locked while holding it in your hand while mating. (Fig.2) 7. Mis-insertion prevention Mating portions are polarized to avoid improper mating and connector damage. 8. Mating mark Both the plug and the receptacle feature a white index mark on them which is used to quickly align the two interfaces for proper mating.(Fig.3) 9. Complies with the RoHS requirements In consideration of environmental issues, we use only materials that comply with the RoHS Directive. Push-pull- single action lock Ø15.5 42.1 Ø12.6 32.3 3 and 6 pos. 10 and 12 pos. Mated dimensions Lock/release operation Alignment marks Polarized interface Push-pull locking collar Fig.1 Fig.2 2018.6ᶇ In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

Product Specifi cations Ratings Current rating 5A (3 pos.) 2A (6,10,12 pos.) Operation Temperature Range -25ç to +85ç Voltage rating 100V AC,140V DC(3,6 pos.) 30V AC,42V DC(10,12 pos.) StorageTemperature Range -10ç to +60ç Characteristic Specifi cation Conditions 1. Contact resistance 5mø max. (3 pos.) 15mø max. (Solder type : 6, 10, and 12 pos.) 30mø max. (Through hole type: 6 and 12 pos.) 1A DC 2. Insulation resistance 1000Mø min. 100V DC 3. Withstanding voltage No fl ashover or insulation breakdown 300V AC / 1minute 4. Vibration No electrical discontinuity of 10µs or more Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 1 cycle= 5min, 10 cycles in each of the 3 directions. 5. Durability (mating/un-mating) Contact resistance 10mø min.(3 pos.) Contact resistance 30mø min. (Solder type: 6, 10, and 12 pos.) Contact resistance 100mø min. (Through hole type: 6 and 12 pos.) 1000 cycles 6. Temperature cycle Insulation resistance 100Mø min. (-55ç : 30 minutes → Room temperature : 10 to 15 minutes → +85ç : 30 minutes → Room temperature : 10 to 15 minutes) for 5 cycles 7. Humidity resistance Insulation resistance 10Mø min. (when humidity high) 100Mø min. (when dry) 96 hours at temperature of 40ç and humidity of 90% to 95% 8. Waterproof performance No water penetration inside. While mated with corresponding or protective cap submerged at depth of 1m for half hour. Material / Finish Assembly Component Material Finish Remarks Plug Insulator PPS Black UL94V-0 PBT Black UL94V-0 Gasket Silicone rubber, chloroprene Contacts Brass, phosphor bronze, Receptacles Insulator PPS Black UL94V-0 Contacts Brass, phosphor bronze, Crimp contact HR30 Series●Miniature Waterproof Plastic Connectors Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. HR30 - 6 P A - 6 S C (* *) qw e r t y u i q Model name : HR30 t Number of Contacts : 3, 6, 10 and 12 y Contact type S : Female contact P : Male contact u Contact wiring type Blank : Solder C : Crimping D : Through hole i Other specifications: A two-digit character is added to indicate other specifications as needed. w Shell size : Outside diameter/plug mating side e Connector type : P : Plug Connector type : R : Receptacle Connector type : J : Jack r Variation Blank : Standard A : Fine wire B : Over mold type

HR30 Series●Miniature Waterproof Plastic Connectors Plugs Crimp Type Solder Type Ø15.5 A(Fully tightened) Applicable cable diameter B A(Fully tightened) Applicable cable diameter HR30-7P-12SC (71) (Representative example) (Representative example)Shown with contacts installed. HR30-6P-6S (31) Part No. HRS No. A B Applicable cable diameter range Solder pot inner diameter Weight HR30-6P-3S(31) 130-0004-1 31 29.8 12.6 4.2 to 5 1.1 mm HR30-6P-6S(31) 130-0010-4 31 0.8 mmHR30-6P-6P(31) 130-0009-5 31 30.3 HR30-6PA-3S(71) 130-0021-0 71 29.8 3.5 to 4.3 1.1 mm HR30-6PA-6S(71) 130-0019-9 71 0.8 mmHR30-6PA-6P(71) 130-0020-8 71 30.3 Part No. HRS No. A Applicable cable diameter range Crimp contact Weight HR30-7P-10SC(71) 130-0013-2 71 39.8 6.2 to 7 HR30-SC-211 6gHR30-7P-12SC(71) 130-0014-5 71 HR30-8P-12PC(71) 130-0015-8 71 HR30-PC-211

HR30 Series●Miniature Waterproof Plastic Connectors Plug for overmolds Crimp Type Solder Type 25.9 Ø15.5 Ø6.4 A ØB ØC Part No. HRS No. A B C Solder pot inner diameter Weight HR30-6PB-3S 130-0034-2 22.7 12.6 5.2 1.1 mm 3.1g HR30-6PB-6S 130-0032-7 0.8 mm 2.9gHR30-6PB-6P 130-0037-0 23.2 HR30-8PB-12P 130-0030-1 4.5g Part No. HRS No. Crimp contact Weight HR30-7PB-10SC 130-0036-8 HR30-SC-211 4.1gHR30-7PB-12SC 130-0033-0 HR30-8PB-12PC 130-0031-4 HR30-PC-211 4.3g HR30-8PB-12PC HR30-6PB-6S

HR30 Series●Miniature Waterproof Plastic Connectors Receptacles Solder Type Gasket B C A D E(Thread) F(Hex nut) 3 4 HR30-6R-6P (71) Through hole Type HR30-8R-12SD (31) D C A B 2 Through hole post (0.2∞0.5) E F(Hex nut) Gasket Crimp Type Ø11.5 Ø15 15.5

9.3 Gasket

M11X1(Thread) 13(Hex nut) HR30-7R-12PC (31) Shown with contacts installed.Shown with contacts installed. Part No. HRS No. A B C D E F Solder pot inner diameter Weight HR30-6R-3P(71) 130-1003-4 71 16 8.3 12 8.9 M8∞0.75 10 1.1mm 2gHR30-6R-6P(71) 130-1009-0 71 0.8mmHR30-6R-6S(71) 130-1008-8 71 18.4 Part No. HRS No. Crimp contact Weight HR30-7R-10PC(31) 130-1012-5 31 HR30-PC-211 3gHR30-7R-12PC(31) 130-1013-8 31 HR30-8R-12SC(31) 130-1014-0 31 HR30-SC-211 Part No. HRS No. A B C D E F Weight HR30-7R-12PD(31) 130-1017-9 31 16 9.3 15 11.5 M11∞1 13 3.4gHR30-8R-12SD(31) 130-1019-4 31 (Representative example) (Representative example) (Representative example)

HR30 Series●Miniature Waterproof Plastic Connectors Jacks Crimp Type Solder Type 37.3 Ø15 (Fully tightened) Applicable cable diameter B(Fully tightened) A 3 4 Applicable cable diameter HR30-7J-12PC (71) HR30-6J-6P (31) Shown with contacts installed. Part No. HRS No. A B Applicable cable diameter range Solder pot inner diameter Weight HR30-6J-6P(31) 130-2009-6 31 12 28.8 4.2 to 5 0.8 mm 3g HR30-6JA-6P(71) 130-2018-7 71 3.5 to 4.3 HR30-7J-12P(71) 130-2020-9 71 15 37.3 6.2 to 7 0.6 mm 5.7g HR30-8J-12S(71) 130-2019-0 71 5.9g Part No. HRS No. Applicable cable diameter range Crimp contact Weight HR30-7J-10PC(71) 130-2015-9 71 6.2 to 7 HR30-PC-211 5gHR30-7J-12PC(71) 130-2017-4 71 HR30-8J-12SC(71) 130-2016-1 71 HR30-SC-211 (Representative example) (Representative example)

HR30 Series●Miniature Waterproof Plastic Connectors Part No. HRS No. A B C Solder pot inner diameter Weight HR30-6JB-3P 130-2029-0 12.7 21.7 5.2 1.1mm 2.3g HR30-6JB-6P 130-2021-1 12 0.8mm 2.2g HR30-6JB-6S 130-2028-0 12.7 2.3g HR30-7JB-12P 130-2023-7 15 23.7 6.4 0.6mm 3.6g HR30-8JB-12S 130-2024-0 4.1g Part No. HRS No. Crimp contact Weight HR30-7JB-10PC 130-2025-2 HR30-PC-211 3.1gHR30-7JB-12PC 130-2022-4 HR30-8JB-12SC 130-2026-5 HR30-SC-211 Jack for overmolds Crimp Type Solder Type Ø15 23.7 Ø6.4 A B C HR30-6JB-6P HR30-8JB-12SC

HR30 Series●Miniature Waterproof Plastic Connectors Part No. HRS No. A B C D E Applicable cable diameter Weight HR30-6P-C(31) 130-3000-7 31 13 8.4 8.9 4 8.8 Ø4.2 to 5 1g HR30-7P-C(31) 130-3004-8 31 16 10.4 10.5 6 11.4 Ø6.2 to 7 2g HR30-8P-C(31) 130-3003-5 31 Part No. HRS No. A B C D E Remarks Weight HR30-7R-C(31) 130-3002-2 31 15.5 14.8 8.5 15 12.1 This cap fi ts each size of the HR30-7R and HR30-8R receptacles Note : When using these caps, do not use the gasket that is normally supplied with the receptacle. The “B” diameter end of the receptacle cap will serve as the gasket. Caps For Receptacle For Plugs 1.40.9 ØE C ØA ØB ØD 1 1.4 C ØA ØB ØD ØE HR30-6R-C (31) HR30-6P-C (31) (Representative example) (Representative example)

HR30 Series●Miniature Waterproof Plastic Connectors Note : Use wire size 26 to 30 AWG with a jacket diameter of 1 mm max. Crimp Contacts Diagrams of Connectors in Combination 0.82 1.15 1.2 A-A cross-section A A 0.82 1.15 1.2 A A A-A cross-section Plugs HR30-*P-**(71) Caps for Plug HR30-*P-C(71) Receptacles HR30-*R-**(71) Jacks HR30-*J-**(71) Caps for Receptacle HR30-*R-C(71) Cap mounting diagram Cable Cap Cap Panel Male contact Female contact Note 1 : Please use connectors with compatible shell size and number of contacts. If you are using a male contact plug, please also use a corresponding product with a female receptacle and a jack. Note 2 : Please install the applicable crimping contacts when using the crimping style connectors. (Please refer to the manual for wiring work.) Note 3 : When using the cap on the receptacle side, do not use the gasket that is normally supplied with the receptacle. The Hirose cap has the necessary gasket as part of the cap unit. Type Part No. HRS No. Packaging type Weight Loose contact HR30-PC-111 130-0022-3 100pcs/pack 0.03g/1 pin Reel contact HR30-PC-211 130-0016-0 10,000pcs/reel 0.03g/1 pin Type Part No. HRS No. Packaging type Weight Loose contact HR30-SC-111 130-0023-6 100pcs/pack 0.03g/1 pin Reel contact HR30-SC-211 130-0017-3 10,000pcs/reel 0.03g/1 pin (Representative example) (Representative example)

HR30 Series●Miniature Waterproof Plastic Connectors Solder termination fixture Back shell tightening collar HR30-6P-6S-T01 HR30-6R-6P-T01 HR30-6P-T02 Applicable Tools Cable Assembly Tools Part No. HRS No. Applicable Connectors Shell size Connector type No. of contacts Contact type HR30-6P-3S-T01 150-0220-1

6 Plug

3 Female

6 Female

HR30-6P-6P-T01 150-0221-4 Male HR30-7P-10SC-T01 150-0228-3

7 Plug 10 Female

HR30-7P-12SC-T01 150-0223-0 12 Female HR30-8P-12PC-T01 150-0227-0 8 Plug 12 Male HR30-6R-3P-T01 150-0225-5

6 Receptacle

3 Male

6 Male

HR30-6R-6S-T01 150-0222-7 Female HR30-7J-10PC-T01 150-0231-8

7 Receptacle

10 Male

HR30-7J-12PC-T01 150-0230-5

12 Male

HR30-8J-12SC-T01 150-0226-8 8 Female Note : Wiring for soldering or disassembly and assembly of plugs and jacks can be accomplished more effi ciently when using the cable assembly tool. Tightening collar for back shell Part No. HRS No. Applicable Connectors HR30-6P-T02 150-0216-4 3 and 6 contacts HR30-8P-T02 150-0224-2 10 and 12 contacts Note : The code ring tightening collar is used to tighten the cord ring to the specifi ed torque. (Please refer to the manual for assembly procedures.)

HR30 Series●Miniature Waterproof Plastic Connectors Contact Position Arrangement Panel Cutout Remarks : 1. The contact arrangement depicts a view from the wiring side. 2. Installation is accomplished by securing the receptacle from the back side of the panel using the supplied hexagon nut. The tightening torque of the hexagon nut should be 0.5 N·m for 3, 6 contacts, and 0.8 N·m for 10, 12 contacts. In addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo. 4567 89 10 1211 312 4567 8910 12 11 3123 4567 8910 HR30-7P-10SC() HR30-7P-12SC() HR30-8P-12PC() HR30-6P-6P()HR30-6P-6S()HR30-6P-3S() Alignment mark Alignment mark B +0.05 A +0.05 D +0.05 ØC +0.05 Manual contact crimping tool HT-102/HR30-1 Automatic contact crimping machine CM-105C Contact extraction tool HR30-TP Receptacle, Board Mounting Through Hole Pattern Remark : 1. The receptacle through hole confi guration depicts a view from the mating side of the connector. 2.The above Δ mark indicates the guide key position. 3.The recommended board maximum thickness :1.2mm. 4. Tolerance of +0.03mm is recommended for the plated through hole location. Tolerance of +0.02mm is recommended for the plated through hole diameter. 7R-12PD 8R-12SD 1.44 1.44 0.480.87 2.22 1.83 0.72 0.72 12-Ø0.65 2.16 2.16 12 11 10 8 6R-6SD 0.9 0.9 1.521.52 0.49 1.351.6 6-Ø0.65 6R-6PD 1.561.56 0.9 0.9 1.81.8 6-Ø0.65 3 4 0.9 0.9 1.44 1.44 0.480.87 2.22 1.83 0.72 0.72 12-Ø0.65 2.16 2.16 11 12 81 0 Applicable Tools Type Description Part No. HRS No. Applicable contact Applicable wire Manual Manual crimping tool HT-102/HR30-1 150-0229-6 HR30-SC-111 AWG26 to 30 HR30-PC-111 Automatic Applicator AP105-HR30-1 901-2015-9 HR30-SC-211 AWG26 to 30 HR30-PC-211 Extraction tool HR30-TP 150-0219-2 HR30-SC-111 HR30-SC-211 HR30-PC-111 HR30-PC-211 ABCD Panel Thishness

HR30 Series●Miniature Waterproof Plastic Connectors Assembly Procedures Solder termination fixture Insulator/contact assemblyBlock end face Plug Assembly Sequence Prepare the cable end according to the dimensions shown in Table 1. Note : When preparing the cable, use caution not to damage the insulation and conductors of the lead wires. Solder type Fix the P case block on the cable termination tool, and after preliminary soldering, solder for 3 to 4 seconds with the soldering iron at 350±10ç . Note 1 : Take care to avoid creating cold solder joints and solder joints with voids or air holes in it. Also check to make sure the solder joint is adequately fused between the lead wires and solder cup. Note 2 : The P case block is a precision unit. Please use caution when soldering the P case block so it does not become damaged. Any damage could result in loss of the waterproof performance. Crimp type After crimping the appropriate contact to the cable lead wire, insert the terminated wire into the correct contact position on the P case block. Note : After inserting the crimping wire/contact, slightly pull the lead wire and check if the crimping contact is properly seated into the P case block. A B Solder type : 3 and 6 Contacts. Solder type : 12 Contacts. Crimp type : 10 and 12 Contacts. 2mm 2mm -0.5mm 5.5mm max. 10mm max. 15 to 20mm B Seal bushing Strain relief Back shell Insulator/contact assembly Cable Spring Push/pull locking collar A

HR30 Series●Miniature Waterproof Plastic Connectors A Push/pull locking collar Guide keys Cable Cable Solder termination fixture Tightening collar for back shell (Refer to Table-2) Cable Back shell Fixation Plug insulator body View A (2:1) Front edge of cable jacket Fig.B Fig.C Groove - sealing bushing Insert the cable by fitting the coupling guide to the wire-connected P case block. Then, pass the cable through and assemble in the following order: 1. spring, gasket, 2 cord clamp, and 3. cord tube. Make sure when assembling it with the cord clamp and cord tube, to maintain the positional relations between the cable sheath end face and the concave area of the gasket as shown in Fig.B. Note : Please install the cord tube using the cord tube tightening tool with the cord ring tightening torque shown in Table-2. ln addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo. When screwing in the cord tube, use your hand to hold the cable so that the cable will not rotate or twist and apply stress to the soldered wires. However, as the cable tends to be twisted slightly (just over one rotation), we recommend that you twist it in the opposite direction in advance. Back shell tightening collar size Torque 3 and 6 Contacts. 10 and 12 Contacts. 16mm 18mm 0.5N.m 0.5N.m Connector Table-2

HR30 Series●Miniature Waterproof Plastic Connectors Points to note when using Heat shrink tubing We recommend that you use shrink tubing over the solder connections in order to protect the soldered wires and to enhance insulation. However, please be careful when applying heat in this area when installing the shrink tube so excess heat does not bleed into or affect the resin parts as shown in the figure below. If the product does become heated beyond the area shown and into the resin parts, please make sure to prevent the following. q Deformation of the C ring. This could result in prevention of locking during mating. w Melting of some parts. To prevent the deformation of the C rings of the receptacles and the jack, we recommend heat to be applied after mating with a compatible plug. Before heating, please mate the plug in the receptacle securely, then pull the back shell for checking whether it is locked properly. If it is heated with semi-fitting, C ring may be thermally deformed with shrinking condition and it may not be locked properly. C ring Shrinkable tube Heat application area Receptacle Compatible plug Back shell Heat application area Mated dimensions Receptacle

HR30 Series●Miniature Waterproof Plastic Connectors General usage notes Precautions 1. Mating 2. Un-mating When mounting, smooth mating will be achieved by holding plug in any are “A” and aligning the arrow of the plug with that of the receptacle, then pushing the plug straight in. When removing the plug from its connected condition, hold the plug by push/pull locking collar (area “B”) and pull straight off. D C Alignment marks C D Receptacle Mounting panel Plug Cable A B Push/pull locking collar Mounting panel Cable 1. Make sure the power is off before mating or un-mating the connector. 2. When mating the connector, push it on with a force of a least 30N. After mating, pull slightly on the connector to check for proper mating and to ensure the connector is fi rmly locked to the receptacle. 3. After mating the connector, do not apply a force over 30N to the cable in the directions shown by the arrows. An excessive load can lead to connector damage. 4. To maintain the waterproof performance, cable clamping force and cable stability, please use a cable within the recommended for cable diameters. Because the performance will differ depending on the cable structure, make sure to check all specifi cations of the cable assembly before use or production. 5. Please assemble and install the connector and components with the specifi ed tightening torque. If the tightening torque is too weak or too strong, loosening or breakage can occur. 6.Please contact Hirose if your application requires compliance with the Electrical Appliance and Meterial Safety Act. Panel 30N max. 30N max. 30N max.

HR30 Series●Miniature Waterproof Plastic Connectors The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810 Phone : +1-978-662-5255 USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ CHINA: HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ KOREA: HIROSE KOREA CO.,LTD. 143, Gongdan 1-daero, Siheung-si, Gyeonggi-do, 15084, Korea Phone : +82-31-496-7000 Fax : +82-31-496-7100 http://www.hirose.co.kr/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960

Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) 18, Enterprise Center Tower 2, 209# Gong He Road, Jing’an District, Shanghai, CHINA 200070 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.552, Regus-Green Bo ulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/ SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 03, Anson Road, #20-01, Springleaf Tower, Singapore 079909 Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Lepas Penang, 11950, Malaysia Phone : +604-648-5536 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ Powered by TCPDF (www.tcpdf.org)