HR12 | DigiCamel IC Datasheet

Online Datasheet

Read HR12 online.

HR12 HIROSE | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 16

Technical content

Features

Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact.
The plug diameter range from Ø12mm to Ø16mm, and satisfies the need for small-size, light-weight and high-density electronic components.
Equipped with internal metal parts and a shielding mechanism, the HR12 (20-contacts) and HR212 feature enhanced protection against EMI. Product Speciﬁ cations Ratings Rated voltage Rated current Operating temperature range Storage temperature range 100V AC, 140V DC 1A -15ç to +60 ˆ -10ç to +60 ˆ Items Speciﬁ cations Conditions 1. Contact resistance 30mø max. (excluding the cable conductor resistance) Measured at DC 1mA 2. Insulation resistance 100Mø min. Measured at DC 250V 3. Withstanding voltage No ﬂ ashover or dielectric breakdown. AC 300V for 1 minute 4. Vibration resistance No electrical discontinuity for 10µs or greater. 10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. Shock resistance No electrical discontinuity for 10µs or greater. Acceleration : 490m/s ɼ duration : 11ms, 3 axis directions, 3 cycles each 6. Mating Cycles 30mø max. of contact resistance (excluding the cable conductor resistance) 1,000 times 7. Temperature cycle Insulation resistance : a minimum of 100Mø -25ç : 30 minutes ➝ Normal temperature : 10 to 15 minutes ➝ 70ç : 30 minutes ➝ Normal temperature : 10 to 15 minutes, left for 5 cycles 8. Moisture resistance Insulation resistance : 1Mø min. (at high humidity) 10Mø min. (when dry) Temperature : 40ç, relative humidity : 90 to 95%, left for 96 hours Material / Finish Part Material Finish Insulator Soft vinylchloride (UL94-0) and Polypropylene (UL94V-0) PBT resin (UL94V-0) and Polycarbonate (UL94V-1) –––––––– Brass, and Zinc alloy Tin plated and Nickel plated Contacts Copper alloy or phosphor bronze Tin plated or selective gold plated and silver plated In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1

HR12 A - 10 L A A 8 P C A 300 A () Plug (Assembly type) and Receptacle HR12 - 10 R C - 8 SDL () Attachment q Model : Series name. HR212 is a enhanced shielding type. w Indication of terminal connector provided or not: For models with connectors on both sides, different signs are used depending on the type of connector on one side. e Shell size : Indicates the outside diameter of the plug mating part. r Connector form : P : Straight plug LP or L : Right angle R : Receptacle tCable removal directions for a right angle plug are classiﬁ ed as follows : A : The cable removal direction is on the right with the guide facing upward viewed from the mating part. B : The cable removal direction is on the left with the guide facing upward viewed from the mating part. yTypes of connector : uNumber of contacts i Contact form : Classiﬁ es the type of contacts as follows: The plug has only male contacts, and the receptacle has only female contacts. P : Male contact PC: Crimp male contact (assembly type plug) SC : Crimp female contact SD : Straight dip female contact SDL : Right angle dip female contact oShape of cable : C : Curled cord S : Straight cord !0 Type of cable : and number of cores. !1Cable length : indicates the length in mm of the cable connected to the plug. Curled cord length : Length of curled part Straight cable length : Cable length !2 Shape of cable end: Plugs with cables of the same shape but different in cable end dimensions and ﬁ nishing are identiﬁ ed by A, !3Types of accessories : SP : Stopper plate !4 Other speciﬁ cations : A two-digit character is added to indicate other speciﬁ cations as needed. HR12 Series●High Performance Miniature Circular Connectors

Part No. HRS No. No. of contacts No. of conductors of cable Remarks HR12-10LA8PS1065(71) 112-3040-0 71 8 8-conductor (Shielded) Straight cord Terminal tin plated HR12-10LA8PS1065(71) ̓ ̒ ̑ ̐ ̏ ̎ ̍ 1065 Ø12 Ø4.8 Receptacle (Crimp Type) Part No. HRS No. No. of contacts HR12-10R-5SC(71) 112-0501-4 71 5 HR12-10R-8SC(71) 112-0504-2 71 8 Remarks: For the mounting holes, see page 4. HR12-10R-8SC(71) Straight Plug HR12-10P8PC300(71) Part No. HRS No. No. of contacts ØA ØB C No. of conductors of cable Remarks HR12-10P5PCD300(71) 112-0101-6 71 5 4.8 15 720 5-conductor (Shielded) Curled cord Terminal tin platedHR12-10P8PC300(71) 112-0102-9 71 8 8-conductor (Shielded) HR12-10P10PCAE300(71) 112-0133-2 71 10 5.5 17.5 700 10-conductor (Shielded) Curled cord Terminal gold plated (Representative example) ̐̏ ̑ Ø16 1.3 11.3 15.4 M14∞1 Hexagon nut 17 (Representative example) 10 max. HR12 Series●High Performance Miniature Circular Connectors

̏ ̑ 15.4 5.9 9.5 1.3 M14×1 Ø16 Dip post (0.6×0.4) (Contact) Dip post (3×0.3) (Grounding terminal) Hexagon subtend dimension 17 Receptacle (Straight Dip Type) Part No. HRS No. No. of contacts Remarks HR12-10R-5SD(71) 112-0502-7 71 5 Terminal tin platedHR12-10R-8SD(71) 112-0505-5 71 8 Remarks : Refer to following diagram for panel mounting dimensions and dip post arrangement dimensions. HR12-10R-8SD(71) (Representative example) Panel mounting dimensions 1BOFMUIJDLOFTTUP Receptacle Dip Post Ø14.1+0.1 13.4+0.1 7.4+0.1 2+0.1 ̑̐̏ Ø10.7 Ø0.8 (8 places) 3.2×0.4 1.4 2.8 1.4 2.8 1.6 1.6 3.2 Hole for grounding terminal 3.2×0.4 +0.1 123 Ø10.7 Ø0.8 (5 places) 3.2×0.4 1.4 2.8 1.4 2.8 1.6 Hole for grounding terminal 3.2×0.4 +0.1 Remarks : Dimensional tolerance of ±0.05mm is recommended for the board arrangement. HR12-10R-5SD(71) HR12-10R-8SD(71) HR12 Series●High Performance Miniature Circular Connectors

A B 5.2 3.52 R5.75 Dip post(0.6×0.4) (Contact) Dip post(2×0.3) (Grounding terminal) Receptacle(Right Angle Dip) Part No. HRS No. No. of contacts A B Remarks HR12-10R-5SDL(71) 112-0503-0 71 5 13 10.5 Terminal tin plated HR12-10R-8SDL(71) 112-0506-8 71 8 13.8 9.3 HR12-10RC-8SDL(71) 112-0514-6 71 Equipped with stopper plate Terminal tin plated Remarks : For dip post arrangement see below ﬁ gure. HR12-10R-8SDL(71) (Representative example) (Connector support part) 2 MIN. (Connector support part) PCB 14 MIN. (For movement) 1+0.2 013.1+0.1 R5.8+0.1 12.1+0.1 02.2 +0.3 Panel mounting dimensions Note : Pay attention that this dimension is not available for 10 contacts. ̍̎̏ 4.5 4.5 10.51.2 1.4 2.8 1.4 2.8 5.2 Ø0.8 (5 places) Grounding terminal holes (2 places) 2.2 ×0.4+0.1 +0.1 +0.1 4.5 4.5 9.31.2 1.2 1.2 1.4 2.8 1.4 2.8 5.2 Grounding terminal holes (2 places) 2.2 ×0.4+0.1 +0.1 Ø0.8 (8 places) +0.1 12.9 5 2.5 Position of applicable receptacle Ø1.5 (4 places) +0.1 Receptacle dip post arrangement Remarks : Dimensional tolerance of ± 0.05mm is recommended for the board arrangement. HR12-10R-5SDL(71) HR12-10R-8SDL(71) HR12-10R-SP(71) (Stopper plate) (Applicable PCB thickness range 1-2) (Note) This product should be mounted on the panel to hold with the interface portion,as shown in the panel mounting hole dimension diagram. When it is difficult to press the connector into the panel, we recommend using the attached stopper plate HR12-10R-SP(71) (112-0507-0 71) as described on page 7. HR12 Series●High Performance Miniature Circular Connectors

Receptacle dip post arrangement Receptacle (Right Angle Dip) HR12-10RC-10SDL(73) HR12-10RD-10SDL(71) ̑̐̏ ̍ ̎ ̏ ̑ ̍̕ ̌ 15.7 112.6 3.52.5 Uneven position Ø1×1 5.2 2.551 Stopper plate Dip post 2×0.8 (2 ground terminals) Dip post of stopper plate (4 pieces) Dip post 0.6×0.15 (10 contacts) ̍̌̕ ̒̓̔ ̎ ̍ 15.7 12.6 2.6 3.5 11.1 5.2 2.55 Stopper plateDip post 2×0.8 Dip post of stopper plateʢ4 piecesʣ Dip post 2×0.4 (1 ground terminal) Dio post 0.6×0.15 (10 contacts) Positioning hole Ø1.1 (1 place) Stopper plate holes Ø1.512.9 4.5 4.5 2.5 2.5 5.2 Ø0.8 (10 places) 11 1.81.8 2 14 (4 places) Grounding terminal holes Ø2.2 (2 places) +0.1 0 +0.1 +0.1 +0.1 12.9 4.5 4.5 2.55 5.2 11.1 Ø0.8 (10 places) 1.81.8 2 14 (4 places) Grounding terminal holes Ø2.2 (2 places) +0.1 +0.1 Stopper plate holes Ø1.5+0.1 Grounding terminal holes Ø2.2 (1 place) +0.1 Part No. HRS No. No. of contacts Remarks HR12-10RC-10SDL(73) 112-0511-8 73 10 Color: Black Stopper plate Terminal gold plated Remarks : For dip post arrangement see below ﬁ gure. Part No. HRS No. No. of contacts Remarks HR12-10RD-10SDL(71) 112-0512-0 71 10 Color: Black Stopper plate Terminal gold plated Remarks : For dip post arrangement see below ﬁ gure. )33$4%- )33%4%- Remarks : Dimensional tolerance of ±0.05mm is recommended for the board arrangement. HR12 Series●High Performance Miniature Circular Connectors

HR12-10R-8SDL(71) ʴHR12-10R-SP(71) Stopper Plate Part No. HRS No. Applicable connector Applicable PCB thickness HR12-10R-SP(71) 112-0507-0 71 HR12-10R-*SDL t : 1 to 2 Remarks : 1. The *mark shows the number of pins. 2. For dip post arrangement,see page 5. 15.7 ʢ3.5ʣ 1 12.6 HR12 Type (20 contacts) /HR212 Type Right Angle Plug (With straight) Part No. HRS No. No. of contacts A No. of conductors of cable Remarks HR212-10LA8PSAT1028(72) 112-2120-1 72 1028 8-conductor (Shielded) Color: Black Terminal: Selective gold platedHR212-10LA8PSAT3028(72) 112-2121-4 72 3028 Remarks : Cable can be taken-out only in direction A. ̏̐̑ A 28 10 MAX. Ø4.8 Ø12 (Representative example))3-"14"5 HR12 Series●High Performance Miniature Circular Connectors

Right Angle Plug (Assembly Type) )3-11 Solder Type Part No. HRS No. No. of contacts Remarks HR212-10LP-8P(73) 112-4002-6 73 Color : Black Terminal : Selective gold plated HR212-10LP-8P(74) 112-4002-6 74 Color : Sand beige Terminal : Selective gold plated Remarks : Cable can be taken-out only in direction A. Note : Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. 㸴㸵㸶㸲㸱㸳㸯㸰 23.3 23.5 Ø 4.8 Inner dia. Straight Plug (With straight cable) Part No. HRS No. No. of contacts A No. of conductors of cable Remarks HR212-10P8PSAT1042(72) 112-2220-6 72 8 1042 8-conductor (Shielded) Color : Black Terminal : Selective gold plated ̒ ̓̔ Ø13.2 Ø12 A Ø4.8 10 Max. (Representative example) HR212-10P8PSAT1042(72) Part No. HRS No. No. of contacts Remarks HR212-10LP-8PC(71) 112-4101-8 71 8 Color : Black Remarks : Cable can be taken-out only in direction A. Note : Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. HR212-10LP-8PC(71) Crimp Type ̐ ̏̑ 23.3 23.5 Ø 4.8 Inner dia. HR12 Series●High Performance Miniature Circular Connectors

Straight Plug (Assembly Type) HR212-10P-8P(71) Part No. HRS No. No. of contacts Remarks HR212-10P-8P(71) 112-4001-3 71 Color : Black Terminal : Tin plated HR212-10P-8P(72) 112-4001-3 72 Color : Sand beige Terminal : Tin plated HR212-10P-8P(73) 112-4001-3 73 Color : Black Terminal : Selective gold plated HR212-10P-8P(74) 112-4001-3 74 Color : Sand beige Terminal : Selective gold plated Note : Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. (Representative example) ̑̏̐ Ø12 Ø13.2 Ø4.8 Inner dia. Solder Type ̍ ̎ ̐̏ ̑ ̒ ̓ Ø12 Ø13.2 Ø4.8 Inner dia. HR212-10P-8PC(71) Part No. HRS No. No. of contacts Remarks HR212-10P-8PC(72) 112-4051-1 72 Color: Sand beige HR212-10P-10PC(72) 112-4052-4 72 Color: Sand beige Note : Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. (Representative example) Crimp Type Part No. HRS No. No. of contacts Remarks Receptacle (Crimp Type) 22.5 17.5 Nut for M2 11.3 15.7 (Representative example) HR212-10R-8SC(71) HR12 Series●High Performance Miniature Circular Connectors

HR212-10R-8SD(73) Receptacle (Straight Dip Type) 15.7 Nut for M2 11.3 8 0.5×0.2 1×0.2 22.5 17.5 Part No. HRS No. No. of contacts Remarks HR212-10R-8SD(73) 112-2002-5 73 Color : Black Terminal : Tin plated HR212-10R-8SD(74) 112-2002-5 74 Color : Black Terminal : Selective gold plated Remarks : For dip post arrangement, see below ﬁ gure. Part No. HRS No. No. of contacts Remarks HR212-10R-8SDL(73) 112-2003-8 73 Color : Black Terminal : Tin plated HR212-10R-8SDL(72) 112-2003-8 72 Color : Sand beige Terminal : Selective gold plated Remarks : For dip post arrangement, see below ﬁ gure. HR212-10R-8SDL(73) Receptacle (Right Angle Dip Type) (Representative example) ̍ ̎ ̏ ̑ 22.5 13.8 17.5 4 -0.4 8 -0.6 4 -1 Nut for M2 8 -0.4 133 Receptacle Dip Post Layout Remarks : Dimensional tolerance of ±0.05mm is recommended for the board arrangement. 1.6 3.2 2.8 1.4 2.8 1.4 1.6 5.5 Ø0.8 (8 places) 2.8 1.4 2.8 1.4 1.2 1.2 2.5 12.6 9.3 1.2 +0.1 Grounding terminal holes 1.1 ×0.5 (1 place) +0.1 +0.1 Ø0.8 (8 places) +0.1 Grounding terminal holes 1.1 ×0.5 (1 place) +0.1 +0.1 )334% )334%- HR12 Series●High Performance Miniature Circular Connectors

Part No. HRS No. No. of contacts Remarks HR212-10RA-8SDL(74) 112-2004-0 74 Color : Black Terminal : Tin plated HR212-10RA-8SDL(72) 112-2004-0 72 Color : Sand beige Terminal : Selective gold plated HR212-10RA-8SDL(73) 112-2004-0 73 Color : Black Terminal : Selective gold plated Remarks : For dip post arrangement, see below ﬁ gure. HR212-10RA-8SDL(74) Receptacle (Right Angle Dip Type) 㸳㸱㸰㸯 123.5 2 -0.4 2 -0.8 10 -0.6 2 -2 Ø 1 10 -0.15 14.1 21.1 Positioning pin Part No. HRS No. No. of contacts Remarks HR212-10RC-10SDL(74) 112-2009-4 74 10 Color : Black Terminal : Selective gold plated Remarks : For dip post arrangement, see below ﬁ gure. HR212-10RC-10SDL(74) 123.5 2 -0.4 2 -0.8 8 -0.6 2 -2 8 -0.4 Receptacle Dip Post Layout Remarks : Dimensional tolerance of ±0.05mm is recommended for the board arrangement. )33"4%- )33$4%- 㸯㸰㸱㸲㸳㸴㸵㸶 9.5 2.8 1.4 2.8 1.4 ʢ8.6ʣ4.3 3.1 1.9 0.7 3.4 14.11.8 5.4 2.6 1.8 4.5 4.5 Ø0.8 (8 places) +0.1 Grounding terminal hole 2.2 ×0.8 ʢ̎ placesʣ+0.1 +0.1 Positioning hole Ø1.1 (1 place) +0.1 Grounding terminal hole Ø2.2 (2 places) +0.1 Ø0.8 (10 places) +0.1 HR12 Series●High Performance Miniature Circular Connectors

Part No. HRS No. No. of contacts No. of conductors of cable Remarks HR12-14P20PSD5000(71) 112-1105-2 71 20 20-conductor (Shielded) Straight cord Terminal : silver plated (Representative example) 1 32 54 5000 Ø16

10 Max

HR12-14LA20PC300(71) Part No. HRS No. No. of contacts No. of conductors of cable Remarks HR12-14LA20PC300(71) 112-1001-7 71 20 20-conductor (Shielded) Curled cord Terminal : silver plated Remarks : Cable can be taken-out only in direction A. 13254 700 20.5 Ø16 300 Ø20 Ø100 10 Max. HR12-14P20PSD5000(71) HR12 Series●High Performance Miniature Circular Connectors

Receptacle (Crimp Type) HR12-14RA-20SC Part No. HRS No. No. of contacts Remarks HR12-14RA-20SC 112-1504-8 20 With hexagon nut 㸯㸰㸱㸲㸳 14.5 15.5 Ø2.2 Receptacle (Right Angle Dip Type) HR12-14R-20SDL Part No. HRS No. No. of contacts Remarks HR12-14RA-20SDL 112-1502-2 20 With hexagon nut Terminal: silver plated Remarks : Dimensional tolerance of ±0.05mm is recommended for the board arrangement. 㸳㸲㸱㸰㸯 Dip postʢ0.6×0.25ʣ (Contact) Dip post (1×0.9) (Grounding terminal) 14.5 Ø2.2 3.5 20.2 1.9 17.78 1.91.9 3.81 5.08 No 1 3.8 1.9 3.8 1.9 No 5 No 20 No 16 Grounding terminal hole Ø1.3 (4 places) +0.1 +0.1 0Ø0.8 (20 places) (Dip Post Layout) HR12 Series●High Performance Miniature Circular Connectors

Type Part No. HRS No. Plated Applicable wire Loose contacts HR12-SC-111 112-0410-0 Selective gold plated 26 to 30 AWG HR12-SC-112 112-0411-3 Silver plated HR12-SC-113 112-0412-6 Tin plated Reel contacts HR12-SC-211 112-0407-6 Selective gold plated HR12-SC-212 112-0408-9 Silver plated HR12-SC-213 112-0409-1 Tin plated Note 1. Use cables with cable covering outer dia. Ø1mm or less. 2. Loose piece contacts are packaged 100 pcs/pack. Reel contacts are packaged 10,000 pcs/reel. Type Part No. HRS No. Plated Applicable wire Loose contacts HR10-PC-111 110-0515-6 Selective gold plated 26 to 30 AWG HR10-PC-113(71) 110-0519-7 71 Tin plated Reel contacts HR10-PC-211 110-0516-9 Selective gold plated HR10-PC-213(71) 110-0520-6 71 Tin plated Note 1. Use cables with cable covering outer dia. Ø1mm or less. 2. Loose piece contacts are packaged 100 pcs/pack. Reel contacts are packaged 10,000 pcs/reel. Applicable tools Type Item Part No. HRS No. Applicable terminal Applicable wire Manual Manual crimping tool HR12-SC-TC 150-0052-9 HR10-PC- 111 113(71) 26 to 30 AWG 111 HR12-SC- 112 113 Automatic Automatic crimping machine body Applicator AP105-HR12-1 901-2015-9 HR10-PC- 211 213(71) 26 to 30AWG 211 HR12-SC- 212 213 Extraction tool HR12-SC-TP 150-0050-3 111 112 HR12-SC- 113 211 212 213 RP6-SC-TP 150-0039-0 111 HR10-PC- 113(71) 211 213(71) 10 ̖ 1.2 1.15 10 ̖ 1.2 1.15 (HR12-SC-TC) Hand Crimp Tool (HR12-SC-TP)ɹɹ(RP6-SC-TP) Extraction Tool Auto Crimp Tool CM-105C Section A-A Section A-A Male Contact HR12 Series●High Performance Miniature Circular Connectors

Fig.3 Ø4.8 Cable Bushing Fig.4 Cable P shell A P shell B Casing Self-tapping screw Ø4.8 Fig.2. Cable Connecting Procedures Works Process Right-angle Plug Straight Plug 1 Use cables of ﬁ nished dia. 4.8mm and nominal conductor cross section of 0.129mm (AWG#26) and under. (Inner dia. of solder pot of soldering terminal is Ø0.7mm.) 2 Insert bushing over cable as shown in Fig.1. Install hood over cable. Figure of straight type is omitted. Make cable end treatment to the dimensions shown in Fig.1. For shield cable, an example of cable end treatment is given below. (1) Firmly wrap the cable sheath end with copper tape 6mm wide, 16mm long and 85µm thick (overall thickness including adhesive). (2) Bundle up the shield cables, and tight twist. (Twist at least three turns over 6mm in length from the cable sheath tip) (3) Cut the shield cables at 6 -1mm from the cable sheath tip, and fold back as shown in Fig.1. (Soldering Type) Solder cables to mold block into which terminals are assembled. (Crimping Type) Use applicable tool (HR12-SC-TC or CM-105) to crimp connect cables to applicable crimping terminals, then insert crimped terminals into mold and ﬁ x them to complete the mold block. 5 Assemble mold block having cables connected to location P shell A as shown in Fig.1. Carefully note that mold block and P shell A have directional polarization. 6 Assemble bundled shield cables so that they are positioned at the center (C section) of cable outlet of P shell A as shown in Fig.1. Install P shell B over P shell A as shown in Fig.2 and avoid catching of internal cables. Use the M2 self-tapping screws supplied (shape of screw head is phillip #0 for precision machinery) to secure from the direction of P shell B (2 places). Move bushing to the end face of P shell, and put P shell and bushing into the casing as shown in Fig.2. With groove of hood and protruding portion of P shell aligned, install hood over P shell as shown in Fig.3. Install casing over P shell as shown in Fig.4. 10 Now assembling is completed. Cable Copper tape Bushing Shied cable Mold block or mold P shell A P shell B Fig.1 Crimping typeɿ Soldering type Approx.2 C 6 20 1.5 ʴ0.5 Ø4.8 HR12 Series●High Performance Miniature Circular Connectors

Terminal Arrangement and performance Shell size 10 sizes Terminal arrangement No. of contacts 5 8 10 Withstand voltage 300V AC for 1 minute Rated current 1A Insulation resistance 200Mø or more at 250V DC Contact resistance 30mø or less (excluding cable conductor resistance) Shell size 14 sizes Terminal arrangement No. of contacts 20 Withstand voltage 300V AC for 1 minute Rated current 1A Insulation resistance 200mø or more at 250V DC Contact resistance 30mø or less (excluding cable conductor resistance) Remarks : 1. The above ﬁ gures show the receptacle pin inserts as viewed from the mating side. 2. Withstand voltage shows the testing voltage. 3. Contact resistance is as measured at 1A DC. 㸦㸧㸩㸨㸪㸦㸧㸩㸨㸪㸫㸬㸭㸦㸧㸨㸪㸭㸫㸦㸧㸨㸩㸪 The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 08/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com Precautions This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. ɹɾDusty environments ɹɾArea with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. Example; In close proximity to factory exhaust, automotive emissions, etc. ɹɾClose to heaters, or in other areas marked by extreme temperature differences or high humidity. ɹɾClose to rubber products includes rubber adhesives. The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. Storage Packing state; Packed in original packing or equivalent container Temperature -10 to +60ç Humidity 85% Max (It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) Please use this products within 6 months of delivery. (After 6 month, please check the solderbility before use) “Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB. HR12 Series●High Performance Miniature Circular Connectors Powered by TCPDF (www.tcpdf.org)

Product Information

HR12 specifications and overview.

Summary

High Performance Miniature Circular Connectors

Description

High Performance Miniature Circular Connectors

Source title HR12 Datasheet(PDF) - Hirose Electric

Related Parts

More parts from the same family.

Browse manufacturer