HP0315AFKP2-S NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm SMT Tactiles Series HP03 Distinctive Characteristics .244” (6.2mm) square body allows compact mounting. Heat resistant resin body meets lead-free solder processing requirements and UL flammability rating of 94V-0. Stick-tube and tape-reel packaging allow rapid automated placement of devices. Gold plated contacts available for very low voltage/current applications offer advantages of little or no oxidization or sulfurization and stable contact resistance. Gull-winged terminals ensure mechanical stability during soldering and simplified solder joint inspection. Insert molded terminals lock out flux, solvents, and other contaminants and allow automated soldering. Tape-reel packaging meets EIA-481-2 Standard. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0039” (0.10mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm SMT Tactiles Series HP03 General Specifications Electrical Capacity (Resistive Load) Power Level (code P2): 3VA maximum @ 28V DC maximum (Applicable Range 10mA ~ 125mA @ 0.1V ~ 28V) Logic Level (code P4): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement for further explanation of operating range. Other Ratings Contact Resistance: 100 milliohms maximum Insulation Resistance: 100 megohms minimum @ 100V DC Dielectric Strength: 250V AC minimum for 1 minute minimum between contacts & between contacts & case Mechanical Life: 500,000 operations minimum Electrical Life: 500,000 operations minimum Nominal Operating Force: 1.60N Total Travel: .008” (0.2mm) Materials & Finishes Actuator: Glass fiber reinforced polyamide (UL94V-0) Case: Stainless steel Base: Glass fiber reinforced polyamide (UL94V-0) Movable Contacts: Stainless steel with silver or gold plating Stationary Contacts: Brass with silver or gold plating Terminals: Brass with silver or gold plating Environmental Data Operating Temperature Range: –20°C through +70°C (–4°F through +158°F) Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 100G (981m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Reflow Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 actuator and base UL Recognition These switches are designed for use in a low-voltage, low-current circuit. & CSA Certification: When used as intended, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm SMT Tactiles Series HP03 TYPICAL SWITCH ORDERING EXAMPLE POLE & CIRCUIT Actuator Position ( ) = Momentary Switch Throw & Schematic Pole Model Normal Down Note: Terminal numbers are not actually on the switch. SP HP0315A OFF (ON) SPST TYPICAL SWITCH DIMENSIONS Gull-winged HP0315AFKP4 SPST OFF-(ON) Circuit and Normally Open Contacts DESCRIPTION FOR TYPICAL ORDERING EXAMPLE HP0315AFKP4-R Flat Black Button Gold Contacts with 0.4VA Rating Gull Wing Terminals for Upright Mount PACKAGING S Stick-Tube

100 Pieces/

R Tape-Reel 1,000 Pieces/ Reel Tape-Reel Packaging POLE & CIRCUIT 15A SPST OFF (ON) ( ) = Momentary Normally Open Contacts 15A P4HP03 TERMINALS & CONTACTS P2 Gull Wing for Upright Mount; Silver Contacts Rated 3VA max. DC Gull Wing for Upright Mount; Gold Contacts Rated 0.4VA max. @ 28V AC/DC max. F K R ACTUATOR F Flat Button ACTUATOR COLOR K Black (1.4) Typ .055 (2.2) Typ .087 (9.0) .354 (4.5) .177 (0.7) Typ .028 (4.5) .177 1 3 2 4 (0.8) .031 (4.4) .173 (9.0) .354 (0.5) Max .020 (0.3) Typ .012 (0.5) .020 (3.5) Dia .138 (6.2) .244 (6.2) .244

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 6mm SMT Tactiles Series HP03 PACKAGING KEYBOARD MATRIX Blue = PCB Trace, Black = Switch Circuit Switches must be or- dered in 1,000-piece increments when tape-reel packaging is selected. Packaging meets EIA-481-2 Standard. R Tape-Reel These single pole, single throw switches can be used in a key- board matrix and, using strapped terminals, achieve a com- mon bus electrical configuration on a single-sided PC board. These single pole, single throw switches can be arranged on a single-sided PC board matrix with strapped termi- nals to achieve an X-Y type electrical interconnection. Blue = PCB Trace, Black = Switch Circuit Common Bus Matrix X-Y Matrix Switches must be ordered in 100- piece increments when stick-tube packaging is selected. S Stick-Tube Tape-Reel Dimensions Each tape-reel of 1,100 pockets contains 1,000 switches. Minimum Leader Length: 15.748” (400mm). Minimum Trailer Length: 6.299” (160mm). (10.5) Typ .413 (2.0) Typ .079 Overall Dia (330.0) 13.0 (6.5) R .256 (16.4) .646 (80.0) Dia 3.150 (22.4) Max .882 Stick-Tube Dimensions Each stick-tube contains 100 switches (12.5) .492 (10.5) .413 (660.0) 25.984 (6.5) .256 3° Max (0.4) .016 (3.0) .118 (4.6) .181 (5.1) .201 (16.0) .630 (1.75) .069 (7.5) .295 (12.0) Typ .472 (2.0) Typ .079 (4.0) Typ .157 (1.5) Dia Typ .059 Direction of Feed 1 2 3 654 7 8 9 B0A A B 1 2 3 4 5 6 7 8 9 10 11 12 13 = ON K e y s ( S w i t c h e s ) P C Te r m i n a t i o n s A B 1 2 3 4 5 6 7 = ON K e y s ( S w i t c h e s ) PC T erminations1 2 3 654 7 8 9 B0A 345