HLQ-10 COOPER | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Catalog Symbol: GLQ (Fuse) HLQ (Fuseholder) Fast-Acting Rejection Style Ampere Rating: 1-10 Amperes Voltage Rating: 300 Volts AC or less Interrupting Rating: 10,000 Amperes Agency Information: Fuse: UL Listed, Std. 248-14, Guide JDYX, File E19180 CSA Certified, C22.2 No. 248.14, Class 1422-01, File 53787 Fuseholder: UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class 6225-01, File 47235 Specialty Fuse GLQ Fast-Acting, Size Rejecting & HLQ Form No. GLQ & HLQ Page 1 of 1 Data Sheet: 2033 Bussmann® 5-22-02 SB02233 0.63" (15.9mm) FUSE The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All othe r copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with desig n applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the rig ht to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Dimensional Data 100 200 CURRENT IN AMPERES AMPERE RATING 1.5100 .01 TIME IN SECONDS Electrical Ratings for Type GLQ Fuses and Rejection Style Carriers Fuse Carrier Fuse Carrier GLQ-1 HLQ-1߉\… GLQ-3 HLQ-3Û‰\… GLQ-1Ú‰“ HLQ-1߉\… GLQ-4 HLQ-5 GLQ-1߉\… HLQ-1߉\… GLQ-5 HLQ-5 GLQ-2 HLQ-3Û‰\… GLQ-9 HLQ-10 GLQ-2Ú‰“ HLQ-3Û‰\`… GLQ-10 HLQ-10 Time-Current Characteristic Curves–Average Melt General Information:
- Size of GLQ fuse varies with ampere rating.
- GLQ fuses mount in HLQ size rejecting carriers (prevents overfusing).
- Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps).
- HLQ carrier comes with 6•of #18 red insulated solid copper wire attached to the line side.
- Customer inserts a #18 insulated solid copper wire into load side receptacle.
- Units can be panel mounted with a separate steel clip. For the knockout hole (see above), choose #BK/A-104. For the keyhole punch type hole, choose #6374 for panels .043” to .062” thick, or #4909 for panels .030” to .042” thick.
- Do not put tension on line (rear) terminal of fuse-holder. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. .720'' CL.850'' .850'' 2.250'' .740'' .870'' .635'' .255'' .410'' Keyhole PunchKnockout Hole Load Lead Line Lead 18.29mm 21.59mm 21.59mm 57.15mm 22.10mm 18.80mm 6.48mm 16.13mm 10.41mm FUSE AND CARRIER MOUNTING HOLE