HLP190 ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Resistance ±10% k Ω Independent linearity ±% Power dissipation at 20˚C W Applied voltage maximum Vdc Electrical output Resolution Phasing between elements Operational temperature °C Output smoothness Insulation resistance Operating mode Wiper circuit impedance Operating force maximum gf Life at 250mm per second Shaft velocity maximum mm/s Shaft seal 25 50 75 100 125 150 1 2 3 4 5 6 22 44 67 74 74 74 Single or dual - minimum of 0.5% to 99.5% applied volts Virtually infinite 0.5mm total in retracted position (multi output units) –30 to +100 To MIL-R-39023 grade C 0.1% Greater than 100MΩ at 500Vdc Voltage divider only - see Circuit Recommendations on page 2 Minimum of 100MΩ x track resistance or 0.5MΩ (whichever is greater) 450 475 500 525 550 600 Typically greater than 50 x 10 cycles at 25mm stroke length 1000 None fitted AVAILABILITY Instruments normally available from stock HLP190/FS, single electrical output, 25 to 150mm stroke length, standard resistance OPTIONS Electrical stroke length Resistance Independent linearity Intermediate taps Upper temperature limit Radiation hard models Non standard electrical stroke lengths can be specified 500Ω to 5kΩ per 25mm of stroke length 25mm and 50mm stroke to ±0.075%; 75mm stroke upwards to ±0.05% Can be specified (limited by a maximum of 14 flying leads) May be extended in certain applications; please discuss with our engineers. Can be built to special order BS = Body clamp mounting with spring shaft FS = Flange mounting with spring shaft Electrical outputs 1 = Single 2 = Dual Stroke length mm Resistance The HLP190 range of hybrid linear potentiometers provides the facility for single or dual electrical output with a body diameter of only 19mm. Stroke lengths are from 25mm to 150mm, with a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position. Suited to a wide range of industrial applications for medium stroke length requirements. HLP190/SA, /BC and /FL models have been superseded by the new SLS190 range. Please see separate brochure for details.
DIMENSIONS AND MOUNTING OPTIONS stop stop E electrical stroke mechanical stroke M Red Black Yellow White Blue Green Direction of shaft extension Dual output BODY CLAMP MOUNTING WITH SPRING SHAFT HLP 190/BS 25.4 35.2 1318 B max 6.35 + 0.00 – 0.50E + 1.00 – 0.00M C adjustable (recommended)
35 STOP STOP
M5 x 0.8–6g 19 12.75/12.65 6.5 R 12.7 10.5 6.2 3 holes 4.2 dia equispaced on 43.05/42.95 PCD B 23 15.0 + 0.00 – 0.50E + 1.00 – 0.00M4.5 STOP STOP 19 25.5 2 4.75 FLANGE MOUNTING WITH SPRING SHAFT HLP 190/FS Mechanical stroke M mm Body length B type BS mm type FS mm Clamp spacing † C mm Weight approximate type BS single output g type FS single output g † recommended position ELECTRICAL CONNECTIONS Flying leads: PVC sheathed cable, 500mm long with ETFE insulated 19/0.15 cores. Note: Drawings not to scale 25 50 75 100 125 150 155 205 230 255 305 355 156 206 231 256 306 356 114 164 189 214 264 314 93 113 128 158 173 188 120 140 155 185 200 215 stop stop E electrical strokeRed Black Yellow Direction of shaft extension mechanical stroke M Single output