HLD051R2M SHINDENGEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1.2A_ HL Series Shindengen{$)America. Inc. <_<

FEATURES

® High Reliability ® Built in Inductor a, Seer m Small Packaging 7 ™@ Standard Output Voltage Adjustment ti a ( With External Potentiometer) a a @ Custom Control Chip Yields Compact Size with Low Cost a : No Heat Sink Required a fe vaiiinaie SS SPECIFICATIONS ENVIRONMENTAL INPUT Operating Ambient Temp. ~10 to +70°C (See Derating Chart) Voltage Range See Model Selection Table Storage Temp. ~30 to +85°C Max. Input Current See Model Selection Table Cooling Conditions No external heat sink required OUTPUT Output Voltage See Model Selection Table FUNCTIONS Set Point 2% Overload Protection Current limit (automatic reset) Regulation Thermal Protection Standard Total 5% Remote ON/OFF Standard Noise & Ripple, (peak-to-peak) 5V Output 25 mV max. em 12V a Output 25 mV max MODEL SPECIFICATIONS Output Current See Model Selection Table ‘Output Model and Input Range Volts | Range* [Amps 83200 [17-32 VDC_ Short-Circuit Protection Foldback with automatic reset +5 3to11 | 1.2/2A Peak HLDOS1R2M_ | J H2_ | 8to24 | 1.2/2A Peak = ~ HLE121R2M Efficiency 75 - 91% (typ.) 5 | 20-8 4.0 | HLNDOS001M = -12_| -8to-20 07 HLND120R7M = Remote ON / OFF * With external potentiometer Control Available Instantaneous Output Current 1.44

1.2A HL Series Shindengen{@j America. Inc. —— ee oes A geen MECHANICAL SPECIFICATIONS Size (W x D x H) 0.79 x 1.18 x 0.87 inches (20 x 30 x 22 mm) Weight 0.3 02 (8.5 g) 0.138 0.788 0.867 uv ° i | CL) o -—— 7 | iS) So ee | i ty) SS 5 ——| 2 o* — = w-.- e+ | = oo = = is | — | B =— | “a F- . o CT | 8 0.040 S nN & ° - o [=] co : 2 u se Oo oOo Nn fo 8 / ny ee TERMINAL FUNCTION STANDARD EXTERNAL CONNECTION DIAGRAM Function 3p srs Remote control w co co (+) Input — Ma 2] Hupostezu ot OH) Ra —_ - ee ve

4 Ground ner i Sve boy

5____| Relay or Drooping setting we i otal 8 | )Ouput Re 0 vai: Vout down Ooult constants 7 | Drooping setting” (see note) ez vout ah (recommended values)

8 Output voltage adjustment _ cae eres

9 Coil _ _

10 Coil

*Note: Do not connect when operating normally Note 1 : The following terminals must be connected together : 3 and 10 5 an Note 2 : When not using the remote control, please connect ° | noe termind ta he reucd aise espace Dimensions in inches; () Dimensions in mm.