HLMP-1385 HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • High Intensity
  • Choice of 4 Bright Colors High Efficiency Red Orange Yellow High Performance Green
  • Popular T-1 Diameter Package
  • Selected Minimum Intensities
  • Wide Viewing Angle
  • General Purpose Leads
  • Reliable and Rugged
  • Available on Tape and Reel

Description

This family of T-1 lamps is widely used in general purpose indicator applications. Diffusants, tints, and optical design are balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for increased design flexibility. Package Dimensions HLMP-130X Series HLMP-1385 HLMP-140X Series HLMP-1485 HLMP-1503 HLMP-1523 HLMP-1585 HLMP-K40X Series HLMP-K600 Red (GaAsP on GaP) (GaAsP on GaP) (GaAsP on GaP) (GaP) 5964-9374E

Absolute Maximum Ratings at TA = 25°C Parameter HER/Orange Yellow Green Units Peak Forward Current 90 60 90 mA Average Forward Current[1] 25 20 25 mA DC Current[2] 30 20 30 mA Reverse Voltage (IR = 100 µA) 5 5 5 V Transient Forward Current[4] 500 500 500 mA (10 µsec Pulse) LED Junction Temperature 110 110 110 °C Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C Storage Temperature Range -55 to +100 Lead Soldering Temperature 260 °C for 5 seconds [1.6 mm (0.063 in.) from body] Notes: 1. See Figure 5 (HER/Orange), 10 (Yellow), or 15 (Green/Emerald Green) to establish pulsed operating conditions. 3. For Red, Orange, and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. Electrical Characteristics at TA = 25°C Device Test Symbol Description HLMP- Min. Typ. Max. Units Conditions IV Luminous Intensity High Efficiency Red 1300 1.3 5.0 mcd I F = 10 mA 1301 2.1 5.5 1302 3.4 7.0 1385 8.6 11.0 Orange K400 1.3 5.0 K401 2.1 5.5 K402 3.4 7.0 Yellow 1400 1.4 5.0 1401 2.2 6.0 1402 3.6 7.0 1485 5.7 10.0 Green 1503 1.0 5.0 1523 2.6 7.0 1585 4.2 8.5 Emerald Green K600 1.0 4.5

Electrical Characteristics at TA = 25°C (cont.) Device Test Symbol Description HLMP- Min. Typ. Max. Units Conditions 2θ1/2 Included Angle Between All 60 Deg. I F = 10 mA Half Luminous Intensity See Note 1 Points λPEAK Peak Wavelength High Efficiency Red 635 nm Measurement Orange 600 at Peak Yellow 583 Green 565 Emerald Green 558 λd Dominant Wavelength High Efficiency Red 626 nm See Note 2 Orange 602 Yellow 585 Green 569 Emerald Green 560 Δλ 1/2 Spectral Line Halfwidth High Efficiency Red 40 nm Yellow 36 Green 28 Emerald Green 24 τs Speed of Response High Efficiency Red 90 ns Orange 280 Yellow 90 Green 500 Emerald Green 3100 C Capacitance High Efficiency Red 11 pF V F = 0; Orange 4 f = 1 MHz Yellow 15 Green 18 Emerald Green 35 RθJ-PIN Thermal Resistance All 290 °C/W Junction to Cathode Lead VF Forward Voltage HER/Orange 1.5 1.9 2.4 V I F = 10 mA Yellow 1.5 2.0 2.4 Green 1.5 2.1 2.7 Emerald Green 2.1 2.7 VR Reverse Breakdown All 5.0 V I R = 100 µA Voltage ηV Luminous Efficacy High Efficiency Red 145 lumens See Note 3 Orange 380 Watt Yellow 500 Green 595 Emerald Green 655 Notes: 1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie= Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt.