HLMP-08XX HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Two color operation
  • Three leads with one common cathode
  • Option of straight or spread leads configuration
  • Diffused, wide visibility range Selection Guide Min. Luminous Intensity Iv (mcd) Package Part Number Color Green Red Yellow I F (mA) T-1 3/4 HLMP-4000 Green/HER 4.2 2.1 10 HLMP-4000#xxx 4.2 2.1 10 HLMP-4015 Green/Yellow 20.0 20 20 Rectangular HLMP-0800 Green/HER 2.6 2.1 20 HLMP-0805 Green/Yellow 2.6 1.4 20

HLMP - X X X X # X X X Mechanical Options 002: Tape & Reel, Straight Leads 010: Right Angle Housing, Even Leads Color Options 00: High Efficiency Red (HER) / High Efficiency Green 05/15: Yellow / High Efficiency Green Package Options 40: T-1 3/4 (5 mm) 08: Rectangular Package Dimensions HLMP-40xx Straight Leads HLMP-08xx Straight Leads 6.10 (0.240) 5.59 (0.220) 25.40 (1.00)MIN. 0.508 (0.020) SQ. TYP. RED OR YELLOW ANODE (SHORT LEAD) 1.27 (0.050) NOM. 0.89 (0.035) 0.64 (0.025) 9.19 (0.362) 8.43 (0.332) 5.08 (0.200) 4.57 (0.180) 1.27 (0.050) NOM. 2.54 (0.100) NOM. FLAT INDICATES ANODE COMMON CATHODE GREEN ANODE 2.54 (0.100) NOM. 1.27 (0.050) NOM. 0.508 (0.020) SQ. TYP. 2.41 (0.095) 2.03 (0.085) 5.46 (0.215) 4.98 (0.196) 8.00 (0.315) 7.37 (0.290) 2.23 (0.088) 1.98 (0.078) 5.18 (0.204) 4.93 (0.194) 1.27 (0.050) NOM. 25.40 (1.00)MIN.COMMON CATHODE COMMON CATHODE RED OR YELLOW ANODE (SHORT LEAD) COMMON CATHODE GREEN ANODE SIDE VIEW Notes: 1. All dimensions are in millimeters (inches). 2. Epoxy meniscus may extend about 1 mm (0.040") down the leads.

Absolute Maximum Ratings at TA = 25˚C Parameter HER/Green Yellow/Green Units Peak Forward Current 90 60 mA Average Forward Current[1,2] (Total) 25 20 mA DC Current[2] (Total) 30 20 mA Power Dissipation[3] (Total) 135 135 mW Operating Temperature Range –20 to +100 –20 to +100 ˚C Storage Temperature Range –55 to +100 –55 to +100 ˚C Reverse Voltage (IR = 100 µA) 5 5 V Transient Forward Current[4] 500 500 mA (10 µsec Pulse) Solder Dipping Temperature 260 for 5 seconds ˚C (1.6 mm (0.063 inch) below seating plane) Notes: 1. See Figure 5 to establish pulsed operating conditions. 2. The combined simultaneous current must not exceed the maximum. 3. The combined simultaneous current must not exceed the maximum. 4. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. Notes: 1. The dominant wavelength, λ d, is derived from the CIE Chromaticity Diagram and represents the single wavelength which defines the color of the device. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. Radiant intensity, le, in watts steradian, may be found from the equation le = Iv/ηV, where Iv is the luminous intensity in candelas and η V is the luminous efficacy in lumens/watt. Electrical/Optical Characteristics at TA = 25˚C High Efficiency Red Green Yellow λPEAK Peak 635 568 583 nm 20 mA Wavelength λd Dominant 626 570 585 nm 20 mA Wavelength [1] τs Speed of 90 260 90 ns Response C Capacitance 11 18 15 pF V F = 0, f = 1 MHz Voltage VR Reverse 5 5 5 V I R = 100 µA Voltage RθJ-PIN Thermal 210 210 210 °C/W Junction-to- Resistance Cathode Lead 2θ1/2 Included Angle between half luminous intensity points [2] HLMP-40xx 65 65 65 degree HLMP-08xx 100 100 100 ηV Luminous 145 595 500 lm/W Efficacy [3]

Figure 1. Relative intensity vs. wavelength. Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak LED current. Figure 5. Maximum tolerable peak current vs. pulse

100 KHz 3 KHz 100 Hz

30 KHz 1 KHz

10 KHz 300 Hz

representative for further clarification/information.

002 Tape & Reel, straight leads, minimum increment 1300 pcs/bag

010 Right Angle Housing, even leads, minimum increment 500 pcs/bag

Figure 6. Relative luminous intensity vs. angular displacement for HLMP-40xx. Figure 7. Relative luminous intensity vs. angular displacement for HLMP-08xx.

www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna- tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-3775EN May 30, 2003 5988-9672EN