HLMP-4000 HP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
T-13/4, 2 mm X 5 mm Rectangular Bicolor LED Lamps High Efficiency Red/ High Performance Green Technical Data H Features:
- Two Color (Red, Green) Operation
- (Other Two LED Color Combinations Available)
- Three Leads with One Common Cathode
- Option of Straight or Spread Lead Configurations
- Diffused, Wide Visibility Lens
Description
HLMP-0800 are three leaded bicolor light sources designed for a variety of applications where dual state illumination is required in the same package. There are two LED chips, high efficiency red (HER), and high performance green (Green), mounted on a central common cathode lead for maximum on-axis viewability. Colors between HER and Green can be generated by independently pulse width modulating the LED chips. Other Bicolor Combinations Other bicolor combinations are available:
- HER/yellow
- HER/green
- DH AlGaAs red/green. Contact your local Hewlett- Packard Components Field Sales representative for details. Package Dimensions HLMP-4000 HLMP-0800 HLMP-4000 HLMP-0800 5964-9363E
Notes: 1. See Figure 5 to establish pulsed operating conditions. 2. The combined simultaneous current must not exceed the maximum. 3. The combined simultaneous power must not exceed the maximum. 4. For HER and Green derate linearly from 50°C at 0.5 mA/°C. 5. For HER and Green derate linearly from 25°C at 1.8 mW/°C. 6. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. High Efficiency Parameter Red/Green Units Peak Forward Current 90 mA Average Forward Current[1,2] (Total) 25 mA DC Current[2,4] (Total) 30 mA Power Dissipation[3,5] (Total) 135 mW Operating Temperature Range -20 to +85 °C Storage Temperature Range -55 to +100 Reverse Voltage (IR = 100 µA) 5 V Transient Forward Current[6] 500 mA (10 µsec Pulse) Lead Soldering Temperature [1.6 mm (0.063 in.) below 260 °C for 5 seconds seating plane] Absolute Maximum Ratings at TA = 25°C Package Dimensions, continued 0.89 (0.035) 0.64 (0.025) 6.10 (0.240) 5.59 (0.220) 5.08 (0.200) 4.57 (0.180) 20.32 (0.800) MIN. 0.508 (0.020) 9.19 (0.362) 8.43 (0.332) 2.54 ± 0.25 (0.100 ± 0.010) SQUARE NOMINAL GREEN ANODE 2.54 ± 0.25 (0.100 ± 0.010) COMMON CATHODE FLAT INDICATES RED ANODE RED ANODE (SHORT LEAD) COMMON CATHODE 5.46 (0.215) 4.98 (0.196) 5.18 (0.204) 4.93 (0.194) 20.32 (0.800) MIN. 0.508 (0.020) 8.00 (0.315) 7.37 (0.290) 2.54 ± 0.25 (0.100 ± 0.010) SQUARE NOMINAL GREEN ANODE 2.54 ± 0.25 (0.100 ± 0.010) COMMON CATHODE RED ANODE (SHORT LEAD) COMMON CATHODE 2.54 ± 0.25 (0.100 ± 0.010) 2.41 (0.095) 2.03 (0.085) 2.23 (0.088) 1.98 (0.078) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS. SIDE VIEW 2.54 ± 0.25 (0.100 ± 0.010)
- The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- Radiant intensity, Ie, in watts steradian, may be found from the equation Ie = Iv/ηv where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt. Figure 1. Relative Intensity vs. Wavelength.