HLMP-Q106A FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

0.075 (1.9) 0.063 (1.6) 0.010 (0.26) 0.002 (0.06) 0.056 (1.44) 0.048 (1.24) 0.024 (0.6) 0.016 (0.4) 0.091 (2.3) 0.083 (2.1) 0.020 (0.5) 0.012 (0.3) 0.276 (7.0) MIN 0.058 (1.40) 0.050 (1.28) EMITTER 0.087 (2.2) 0.079 (2.0) 0.031 (0.78) 0.023 (0.58) ANODE CATHODE MARK (COLOR STRIPE ON SIDE OF PACKAGE) SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) 1 of 4 4/4/00 300049A PACKAGE DIMENSIONS

FEATURES

  • Subminiature package  Low profile package  Three lead bend options for surface mounting  Available in tape and reel NOTE: Dimensions are in inches (mm). AlGaAs RED HLMP-Q106A Clear AllnGaP ORANGE HLMA-QH00A Clear AllnGaP YELLOW HLMA-QL00A Clear

DESCRIPTION

These subminiature LED lamps are intended for high volume, low cost status indication on PCBs, as well as for backlighting keyboards and switches. Choices of “Yoke”, “Z-Bend” or “Gull- Wing” lead bends are available. Parameter AlGaAs Red AllnGaP Orange AllnGaP Yellow UnitsHLMP-Q106A HLMA-QH00A HLMA-QL00A Continuous Forward Current - IF 50 50 50 mA Peak Forward Current - IF 200 100 100 mA(f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage - VR (IR = 10 µA) 5 5 5 V Power Dissipation - PD 100 120 120 mW Operating Temperature - TOPR -40 to +100 °C Storage Temperature - TSTG -40 to +100 °C Lead Soldering Time - TSOL Wave 260 for 5 sec °C Reflow 260 for 10 sec ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Part Number AlGaAs Red AllnGaP Orange AllnGaP Yellow ConditionHLMP-Q106A HLMA-QH00A HLMA-QL00A Luminous Intensity (mcd) IF = 20mA Minimum 50 150 150 Typical 500 500 500 Forward Voltage (V) IF = 20mA Maximum 2.4 2.4 2.4 Typical 1.9 1.9 1.9 Peak Wavelength (nm) 660 620 590 I F = 20mA Spectral Line Half Width (nm) 20 18 15 I F = 20mA Viewing Angle (°) 25 25 25 I F = 20mA ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C)

IF - DC FORWARD CURRENT (mA) RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 2.0 1.5 1.0 1.0 0.9 0.5 0.0 0 2 02 03 04 05 0 100 VF - FORWARD VOLTAGE (V) IF - FORWARD CURRENT (mA) Fig. 1 Forward Current vs. Forward Voltage AlGaAs Red AlGaAs Red AllnGaP Y ellow AllnGaP Orange AllnGaP Y ellow AllnGaP Orange RELATIVE INTENSITY NORMALIZED INTENSITY Fig. 3 Relative Intensity vs. Peak Wavelength Fig. 4 Relative Luminous Intensity vs. Angular Displacement 1.0 0.5 550 600 650 700 -50 WAVELENGTH (nm) ANGULAR DISPLACEMENT - DEGREES 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -40 -30 -20 -10 0 10 20 30 40 50 TYPICAL PERFORMANCE CURVES SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) AlGaAs RED HLMP-Q106A Clear AllnGaP ORANGE HLMA-QH00A Clear AllnGaP YELLOW HLMA-QL00A Clear

SUBMINIATURE T-1 3/4 (1.9mm) AlGaAs RED HLMP-Q106A Clear AllnGaP ORANGE HLMA-QH00A Clear AllnGaP YELLOW HLMA-QL00A Clear NOTE All dimensions are in inches (millimeters) Call QT Optoelectronics for more information or the phone number of your nearest distributor. www.qtopto.com Yoke Lead Option 0.087 (2.21) 0.079 (2.01) 0.058 (1.48) 0.050 (1.28) 0.109 (2.76) 0.040 (1.02) 0.009 (0.23) 0.027 (0.68) 0.304 (7.72) 0.296 (7.52) 0.020 (0.50) 0.016 (0.4) 0.079 (2.00) 0.075 (1.90) 0.067 (1.70) .026 [0.66] 0.045 (1.14) Gull-Wing Lead Option 0.075 (1.91) 0.063 (1.60) 0.024 (0.61) 0.016 (0.41) 0.091 (2.31) 0.083 (2.11) 0.020 (0.51) 0.012 (0.30) 0.087 (2.21) 0.079 (2.01) 0.159 (4.05) 0.148 (3.75) 0.007 (0.1) 0.001 (.03) 0.016 (0.40) 0.008 (0.20) 0.058 (1.48) 0.050 (1.28) 0.035 (0.90) 0.028 (0.70) Z-Bend Lead Option 0.087 (2.21) 0.079 (2.01) 0.058 (1.48) 0.050 (1.28) 0.027 (0.68) 0.075 (1.90) 0.067 (1.70) .026 [0.66] 0.024 (0.61) 0.012 (0.30) 0.091 (2.31) 0.083 (2.11) 0.244 (6.20) 0.236 (6.00) 0.181 (4.60) 0.120 (3.04)

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. www.fairchildsemi.com © 2000 Fairchild Semiconductor Corporation 4 of 4 SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) 4/4/00 300049A