HLK-PM03 ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
//www.hlktech.com HLK PM03 DS V1. /201 HLK PM Ultra compact module power Product features 1. Meet UL, CE requirements, 2. Ultra thin, ultra small . All voltage input (AC: 90 ~ 264V) . L ow ripple and low noise . Output overload and short circuit protection . High efficiency, high power density . The product is designed to meet the requirements of EMC and Safety Test . Low power consumption, environmental protection, no load loss <0.1W .100% load aging and testing .1 year warranty perio Environment Condition Item Name Technical Criteria Unit Operation Temperature +60 Store Temperature +80 Relative humidity Cooling way Cooling by radiation Atmospheric pre ssure 106 Kpa Sea level elevation ≤2000 m Vibration Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y ,Z axes Electrical Characteristic Input characteristics (test at room temperature 20
//www.hlktech.com HLK PM03 DS V1. /201 Item Name Technical Criteria Unit Rated input voltage 100 240 V Ac Input voltage range 264 V Ac Maximum input current ≤0.2 A Input current surge ≤10 A maximum input voltage ≤270 V Ac Enter slow start ≤50 mS Input Low V oltage Efficiency Vin=110 V Ac Output fu ll load ≥69 Input High V oltage Efficiency Vin=220 V Ac output full load ≥70 Long term reliability MTBF≥100 000 h Load rated output voltage 3.3 ±0.1 VDc Full rated output voltage 3.3 ±0.2 VDc Short term maximum output current 1200 mA The maximum outp ut current for a long time 1000 mA V oltage Regulation ±0.2 Load Regulation ±0.5 Output ripple and noise (mVp Rated input voltage, full load. Using 20MHz of bandwidth, The load side 10uF and 0.1uF capacitor to be test ed. mV Switch overshoot amplitude (Rated input voltage and output load plus 10%) O Output over current protection 200 % of the output maximum load A Output short circuit protection Direct short circuit at the normal output, automatically resume n ormal operation after a short circuit removal Safety Characteristics Products designed to meet UL, CE safety certification requirements. Safety and electromagnetic compatibility
//www.hlktech.com HLK PM03 DS V1. /201 Designed with the input of 0.5A UL certified insurance; PCB boa rd using double sided copper clad plate production, material for the 94 V0 fire rating level; S afety standards Compliance with UL1012, EN60950, UL60950 Insulation voltage I / P O / P: 2500V AC Insulation resistance I / PO / P> 100M Ohms / 500VDC 25 70% RH Conduction and radiation comply with EN55011, EN55022 (CISPR22) Electrostatic discharge IEC / EN 61000 2 level 4 8kV / 15kV RF radiation Immunity IEC / EN 61000
3 See Application Note
T emperature safety design At room temperature ,the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90 Shell maximum surface temperature does not exceed 60 Logo, packaging, transportation, storage
5.1 Logo
5.1.1 Pr oduct logo In place of products labeled with signs, its content in line with national standards, industry standards.
5.1.2 Packaging logo
Products marked with the manufacturer's name, address, zip code, product type, manufactured year, month, day on the box Marked "up", "moisture" "Handle with care" and other transportation signs, all signs are in line with the provisions of GB 191.
5.2 Packaging
Products are separated using special plastic box packaging, with anti vibration function, and in accorda nce with the provisions of GB 3873. 5.3 T ransport packaged products can be shipped by any transportation service there should be awnings in transport and no excessive vibration, impact, etc.
5.4 Storage
Products should be stored in compliance with GB 38 73. Weight and D imensions
//www.hlktech.com HLK PM03 DS V1. /201 Weight 20g Pin Function AC AC