HLD15YGE POWER-ONE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

DESCRIPTION

FEATURES

The HLD series are through-hole mount, Half-brick, Low profile, Dual output DC/DC high density converters. The HLD series provides onboard conversion of telecom and datacom input voltages to isolated low output voltages without the need for a heatsink. The HLD series is well suited for distributed power architectures, telecom equipment, and LAN/WAN and data process applications.

  • Single-board, multi-layer design  Planar magnetics  Fully automated - minimal ‘touch time’  T wo independently regulated outputs  Can start into high capacitive load  Low profile  Standard half-brick size and pinout Input Parameter Maximum Unit Voltage Range 24 nom. 48 nom. 18-36 36-72 VDC Transient Voltage Withstand 24 nom. 48 nom. 100/100 V/ms Turn-on Time 20 mS Input Reflected Ripple Current 80 mApk-pk Vin UVLO Window 24 nom. 48 nom. 34/30 Von/Voff Output Parameter Maximum Unit Setpoint Accuracy ±1 % Vout Line Reg. Vin min. – Vin max., Iout rated Output 1 Output 2 0.2 1.0 % Vout Load Reg. Iout min. – Iout max., Vin nom. Output 1 Output 2 0.5 1.0 % Vout Min. Output Current, each Output 1.0 A Dynamic Reg., 25% Loadstep Pk Deviation 4 % Vout Settling Time 500 µS Voltage Trim Range ±10 % Power Limit Threshold Range 110-150 % Pout rated OVP Trip Range 115-140 % Vout General Parameter Maximum Unit Switching Frequency 300 KHz Remote ON/OFF Positive On>3.5/Off<1.8 V Negative (optional) On<1.8/Off>3.5 V Isolation Input-Output 1500 VDC Temp. Coefficient 0.03 %/°C Board Temp Operating Range -40 to +100 °C Storage Range -40 to +125 °C Thermal Shutdown Range 105-115 °C Humidity max, Non-Condensing 95 % Safety Pending Weight (approx) 2 Oz. Specifications typically at 25°C, nominal line, and full load unless otherwise stated. Specifications subject to change without notice. Patents Pending Notes HLD15ZED 40% 50% 60% 70% 80% 90% Iout1 / Iout2 (A) Efficiency Vin = 36V Vin = 48V Vin = 72V REV. 08/01

MODEL INPUT VOLTAGE INPUT VOLTAGE MAXIMUM INPUT OUTPUT RATED OUTPUT RIPPLE & NOISE TYPICAL (VOLTS) RANGE (VOLTS) CURRENT (AMPS)* VOLTAGE (VOLTS) CURRENT (AMPS)* pk-pk (mV) EFFICIENCY HLD15YGE 24 18-36 4.4 5.0/3.3 12/15 100/100 84% HLD15YGB 24 18-36 4.4 5.0/1.8 12/15 100/100 83% HLD15YED 24 18-36 4.5 3.3/2.5 15/15 100/100 81% HLD15YEB 24 18-36 4.5 3.3/1.8 15/15 100/100 81% HLD15ZGE 48 36-72 2.3 5.0/3.3 12/15 100/100 86% HLD15ZGB 48 36-72 2.4 5.0/1.8 12/15 100/100 85% HLD15ZED 48 36-72 2.4 3.3/2.5 15/15 100/100 83% HLD15ZEB 48 36-72 2.4 3.3/1.8 15/15 100/100 83% HLD15ZED-G**** 48 36-72 2.4 3.3/2.5 15/15 100/100 83% NOTES: * Maximum input current at minimum input voltage, maximum rated output power. At nominal V in, rated output. * Current can be drawn from any single output to its maximum rated value, or from both outputs to a combined power level of 60 W. **** -G overcurrent protection is latched; all other models hiccup. MODELS - (See the last page of section for options.) Half-Brick MECHANICAL DRA WING 0.40 (1.02) 0.18 (4.60) 0.50 (12.70) 2.40 (61.0) 1.50 (38.10) 1.20 (30.48) 0.90 (22.86) 0.50 (12.70) 0.20 (5.08) 0.10 (2.54) 2.28 (57.9) 1.90 (48.26) 0.19 (4.80) 1.40 (35.56) 1.00 (25.40) 0.40 (10.16) 0.50 (12.7) Bottom View PIN Function 1 -Vin

2 No Pin

3 Shutdown

6 Vout2RTN

7 Vout2 Trim

9 Vout1RTN

10 Vout1Trim

Units inches (mm) Tolerances Inches: (Millimeters) Pin: ± 0.002 ± 0.05 (Dimensions as listed unless otherwise specified.)

OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, HLS, HLD, LES, TTL "Low" Turns Module ON QBS, QES, QLS, TES, TQD TTL "High" Turns Module OFF Lucent-Compatible T HAS, HBD, HBS, HES, HLS, QBS, QES, QLS Terminal Strip TS XWS, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS Pin Length and Heatsink Options Standard Pin Length is 0.180" (4.6mm) 0.110" (2.8mm) Pin Length 8 All Units (Except SMS) 0.150" (3.8mm) Pin Length 9 All Units (Except SMS) 0.24" (6.1mm) Horizontal Heatsink 1H All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) 0.24" (6.1mm) Vertical Heatsink 1V All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) 0.45" (11.4mm) Horizontal Heatsink 2H All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) 0.45" (11.4mm) Vertical Heatsink 2V All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) 0.95" (24.1mm) Horizontal Heatsink 3H All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) 0.95" (24.1mm) Vertical Heatsink 3V All Units (All Units Except DIP , HLS, HLD, QLS, Includes Thermal Pad SIP , SM, TLD, and TKD Packages) When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. Example Options: HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems , equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Po wer-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change dependi ng on the date manufactured. Specifications are subject to change without notice. OPTIONS