HLC2705-001 HONEYWELL-ACC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
DESCRIPTION
FEATURES
Side-looking plastic package• TTL/LSTTL/CMOS compatible• On-chip quadrature logic which provides tach and direction outputs Linear or rotary encoder applications• Resolution to 0.018 in.(.457)• Sensitivity versus temperature compensation• Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes The HLC2705 detector is designed to sense speed and direction of mechanical motion. Applications include rotary and linear encoders; the device is especially well suited for the encoding function in an optical mouse. The detector is a monolithic IC, consisting of two narrow adjacent photodiodes, amplifier stages, and quadrature logic which provides two outputs. One is a fixed duration, low level active tachometer (counting) pulse. It is generated whenever the "A" channel illumination passes through the threshold level. The second is a direction output which is set to a logic high or a logic low depending upon which channel is illuminated first. The sensor also has sensitivity compensation circuitry for the output power versus temperature characteristic of an IRED. The IC is encapsulated in a molded, unlensed black plastic package which is transmissive to IR energy, yet provides shielding from visible light. The tachometer output is an NPN collector, internally connected to VÙÙ through a 10 kì (nominal) resistor. The direction output is a totem-pole configuration. Both are capable of directly driving TTL loads. The tachometer pulse is generated at both the increasing and decreasing illumination thresholds of the "A" channel, resulting in two tachometer pulses for each mechanical period of the interrupter. The HLC2705 is designed to work with a mechanical period as small as 0.036 in.(0.914 mm), providing resolution to 0.018 in.(0.457 mm). DIM_031.cdr INFRA-74.TIF OUTLINE DIMENSIONS in inches (mm) 3 plc decimals ±0.005(0.12)Tolerance 2 plc decimals ±0.020(0.51) Honeywell reserves the right to make changes in order to improve design and supply the best products possible.h212
ELECTRICAL CHARACTERISTICS
UNITS TEST CONDITIONSMINPARAMETER SYMBOL TYP MAX ABSOLUTE MAXIMUM RATINGS (25¡C Free-Air Temperature unless otherwise noted) Duration of Output Short to VÙÙ or Ground 1.0 sec. Operating Temperature Range -40¡C to 85¡C Storage Temperature Range -40¡C to 85¡C Soldering Temperature (5 sec) 240¡C Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 213
SCH_046.cdr OUTPUT TIMING DIAGRAM cir_012.cdr Responsivity vs Angular Displacement gra_066.ds4 Relative response - % 50% 60% 70% 80% 90% 100% -100 -80 -60 -20 0 20 60 80 100 Angular displacement - degrees -40 40 Fig. 1 Threshold Irradiance vs Temperature gra_060.ds4 Temperature - °C Relative irradiance 0.0 0.2 0.3 0.4 0.5 2.0 1.0 -40 -20 0 20 40 60 80 100 Fig. 2 All Performance Curves Show Typical Values Honeywell reserves the right to make changes in order to improve design and supply the best products possible.h214
Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 215