HL6343G OPNEXT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Optical output power : 10 mW CW
  • Single longitudinal mode
  • Visible light output : 635 nm Typ
  • Low operating current : 35 mA Typ
  • Low aspect ratio : 1.2 Typ
  • Operating temperature : +50°C
  • TM mode oscillation LDPD 1 3 Internal Circuit
  • HL6344G Package Type
  • HL6343G/44G: G2 LDPD 1 3 Internal Circuit
  • HL6343G Absolute Maximum Ratings (TC = 25°C) Item Symbol Ratings Unit Optical output power P O 10 mW Pulse optical output power P O(Pulse) 12 * mW LD reverse voltage V R(LD) 2 V PD reverse voltage V R(PD) 30 V Operating temperature Topr –10 to +50 °C Storage temperature Tstg –40 to +85 °C Note: Pulse condition : Pulse width ≤ 1 µs, duty = 50% Optical and Electrical Characteristics (TC = 25°C) Item Symbol Min Typ Max Unit Test Condition Threshold current Ith — 20 35 mA — Slope efficiency ηs 0.5 0.8 1.2 mW/mA 6 (mW) / (I (8mW) – I(2mW)) Operating current I OP — 35 45 mA P O = 10 mW Operating voltage V OP — 2.4 2.7 V P O = 10 mW Lasing wavelength λp 630 635 640 nm P O = 10 mW Beam divergence parallel to the junction θ// 13 17 25 ° P O = 10 mW Beam divergence perpendicular to the junction θ⊥ 13 20 25 ° PO = 10 mW Aspect ratio θ⊥/θ// — 1.2 1.5 — P O = 10 mW Monitor current I S 0.06 0.14 0.24 mA P O = 10 mW, VR(PD) = 5 V Notes: 1. Care must be taken in laser diodes handling to prevent optical damage caused by forward surges as well as by ESD. 2. The beam has 12 deg offset against the package refe rence plane. Please take account it mounted on a board.

Rev.0 Jul. 01, 2005 page 2 of 5 Typical Characteristic Curves Slope Efficiency vs. Case Temperature Case temperature, TC (°C) Case temperature, TC (°C) –10 0 50 40302010 –10 0 50 40302010 Slope efficiency, ηs (mW/mA) 0.2 0.4 0.6 1.0 1.4 100 Threshold current, Ith (mA) Threshold Current vs. Case Temperature Optical output power, PO (mW) Forward current, I F (mA) Optical Output Power vs. Forward Current 8020 40 60 1.2 0.8 TC = -10°C 25°C 50°C 40°C 0.2 0.4 0.6 0.8 1.0 –40 –30 –20 –10 0 40 302010 Angle, θ ( ° ) Relative intensity Far Field Pattern PO = 10mW TC = 25°C Perpendicular Parallel Monitor Current vs. Case Temperature –10 0 10 20 30 40 Monitor current, IS (mA) 0.08 0.12 0.16 0.20 Case temperature, TC (°C) PO = 10mW VR = 5V 0.04 Wavelangth vs. Case Temperature Wavelangth, λp (nm) 625 630 640 645 635 –10 0 10 20 30 40 50 Case temperature, TC (°C) PO = 10mW

Rev.0 Jul. 01, 2005 page 3 of 5 Typical Characteristic Curves (cont.) 002 6 48 1 0 Astigmatism vs. Oprical Output Power Optical output power, PO (mW) TC = 25°C NA = 0.55 Astigmatism, AS (mm) 100 Survival rate (%) Applied voltage (kV) Electrostatic Destruction 01 2 304 0 0200 1000 100 Survival rate (%) Applied voltage (V) Electrostatic Destruction Forward (C : 100pF, R : 1.5kΩ) N=10pcs 5surges applied/voltage O ≤ 10% judgment Reverse (C : 100pF, R : 1.5kΩ) N=10pcs 5surges applied/voltage O ≤ 10% judgment 600 800 Polarization Ratio vs. Optical Output Power Optical output power, PO (mW) 06 428 1 0 Polarization ratio 100 150 200 250 TC = 25°C NA = 0.55

Rev.0 Jul. 01, 2005 page 4 of 5 Package Dimensions OPJ Code JEDEC JEITA Mass (reference value) LD/G2 1.1 g 1 2 3 9.0 +0 –0.025φ 1.0 ± 0.1 0.4+0.1 (0.65) (90°) 7.2+0.3 –0.2φ φ 6.2 ± 0.2 ( 2.0)φ Emitting Point 2.451.5 ± 0.1 9 ± 13 – φ 0.45 ± 0.1 3.5 ± 0.2 0.3 Glass φ 2.54 ± 0.35 The beam has 12 deg offset against the package reference plane. Please take account it mounted on a board. Note: 1. Unit: mm 12° *1 12° *1

Rev.0 Jul. 01, 2005 page 5 of 5 Cautions 1. Opnext Japan,Inc.(OPJ) neither warrants nor grants licenses of any our rights or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. OPJ bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to ch ange without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. OPJ makes every attempt to ensure that its products are of high quality and reliability. However, contact our sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by OPJ particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. OPJ bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating OPJ product does not cause bodily injury, fire or other consequential damage due to operation of the OPJ product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from OPJ. 7. Contact our sales office for any questions regarding this document or OPJ products. 1. The laser light is harmful to human body especially to eye no matter what directly or indirectly. The laser beam shall be observed or adjusted through infrared camera or equivalent. 2. This product contains gallium arsenide (GaAs), which may seriously endanger your health even at very low doses. Please avoid treatment which may create GaAs powder or gas, such as disassembly or performing chemical experiments, when you handle the product. When disposing of the product, please follow the laws of your country and separate it from other waste such as industrial waste and household garbage. 3. Definition of items shown in this CAS is in accordance with that shown in Opto Device Databook issued by OPJ unless otherwise specified. Sales Offices Device Business Unit Opnext Japan, Inc. Takagi Bldg., 3F, 1-3-9, Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032 Japan Tel: (03) 3865-5591 For the detail of Opnext, Inc., see the following homepage: ©2007 Opnext Japan, Inc., All rights reserved. Printed in Japan. Colophon 2.0 Japan (Japanese) http://www.opnext.com/jp/products/ Other area (English) http://www.opnext.com/products/