HL3P-6xC0-000xx ABRACON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
Features
Available in Red/Yellow-Green and Yellow/Yellow- Green color combinations High brightness Low power consumption Support machine auto-insertion Available in ammo-packing
Applications
Status indicators Industrial/Consumer electronics Home appliances CAUTION! This product is Class 1B HBM ESD sensitive per JEDEC Standard. Observe appropriate precautions during handling and processing. Refer to Application Note 1142 for additional details. HL3P-6xC0-000xx 3-mm Round, 3-Leads Auto-Insertable Bicolor LED Lamp
Broadcom HL3P-6xC0-000xx-DS100 HL3P-6xC0-000xx Data Sheet 3-mm Round, 3-Leads Auto-Insertable Bicolor LED Lamp Figure 1: Package Drawing NOTE: 1. All dimensions in millimeters (mm). 2. Tolerance is ±0.3 mm unless otherwise specified. 3. Epoxy meniscus may extend up to maximum 1 mm down the leads. 4. Lead spacing is measured at where the leads emerge from the body. Device Selection Guide (TJ = 25°C, IF = 20 mA) Part Number Color Luminous Intensity, IV (mcd)a,b,c a. The luminous intensity, I V, is measured at the mechanical axis of the package, and it is tested with a single current pulse condition. b. The optical axis is closely aligned wi th the mechanical axis of the package. c. Tolerance is ±15%. Viewing Angle, 2θ½ (°)d d. θ½ is the off-axis angle where the luminous intensity is half of the peak intensity. Min. Typ. Max. Typ. HL3P-61C0-000xx AllnGaP Red 240.0 400.0 680.0 45 AllnGaP Yellow-Green 85.0 140.0 240.0 45 HL3P-62C0-000xx AllnGaP Yellow 140.0 250.0 400.0 45 AllnGaP Yellow-Green 85.0 140.0 240.0 45
Broadcom HL3P-6xC0-000xx-DS100 HL3P-6xC0-000xx Data Sheet 3-mm Round, 3-Leads Auto-Insertable Bicolor LED Lamp Absolute Maximum Ratings Optical and Electrical Characteristics (TJ = 25°C, IF = 20 mA) Parameters Rating Unit DC Forward Current a a. Derate linearly as shown in Figure 6. 25 mA Peak Forward Current b b. Duty factor = 10%, frequency = 1 kHz. 60 mA Power Dissipation 63 mW LED Junction Temperature 100 °C Operating Temperature Range –40 to +85 °C Storage Temperature Range –40 to +85 °C Parameter Symbol Min. Typ. Max. Unit Test Conditions Forward Voltage a Red Yellow Yellow-Green a. Forward voltage tolerance is ±0.1V. VF 2.1 2.0 2.1 2.5 2.5 2.5 VI F = 20 mA Reverse Voltage b b. Indicates product final test condition. Long-term reverse bias is not recommended. VR 5— — VI R = 100 μA Dominant Wavelength c Red Yellow Yellow-Green c. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. λd 615.0 584.5 564.5 620.0 591.0 570.0 630.0 597.0 576.5 nm I F = 20 mA Peak Wavelength Red Yellow Yellow-Green λ PEAK 628.0 594.0 571.0 nm I F = 20 mA Thermal Resistance d d. Thermal resistance from LED junction to pin RθJ-P — 560 — °C/W LED Junction-to-Pin
Broadcom HL3P-6xC0-000xx-DS100 HL3P-6xC0-000xx Data Sheet 3-mm Round, 3-Leads Auto-Insertable Bicolor LED Lamp Part Numbering System HL 3 P – 6 x 1 x2 0–000 x 3 x4 Code Description Option x1 Color Combination 1 Red/Yellow-Green
2 Yellow/Yellow-Green
x2 Pin Configuration C Common Cathode x3x4 Packaging Option 00 Bulk MC Ammopack with Dimension H 20.0 mm
HL3P-6xC0-000xx Data Sheet 3-mm Round, 3-Leads Auto-Insertable Bicolor LED Lamp Broadcom HL3P-6xC0-000xx-DS100 Application Precautions The drive current of the LED must not exceed the maximum allowable limit across temperature as stated in the data sheet. Constant current driving is recommended to ensure consistent performance. Circuit design must cater to the whole range of forward voltage (V F) of the LEDs to ensure that the intended drive current can always be achieved. The LED exhibits slightly different characteristics at different drive currents, which might result in a larger variation of performance (that is, intensity, wavelength, and forward voltage). Set the application current as close as possible to the test current to minimize these variations. The LED is not intended for reverse bias. Use other appropriate components for such purposes. When driving the LED in matrix form, ensure that the reverse bias voltage does not exceed the allowable limit of the LED. Avoid rapid changes in ambient temperature, especially in high-humidity environments, because they cause condensation on the LED. Eye Safety Precautions LEDs may pose optical hazards when in operation. Do not look directly at operating LEDs because it might be harmful to the eyes. For safety reasons, use appropriate shielding or personal protective equipment.
Copyright © 2024 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, go to www.broadcom.com. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Lead (Pb) Free RoHS Compliant Disclaimer Broadcom’s products and software are not specifically designed, manufactured, or authorized for sale as parts, components, or assemblies for the planning, construction, maintenance, or direct operation of a nuclear facility or for use in medical devices or applications. The customer is solely responsible, and waives all rights to make claims against Broadcom or its suppliers, for all loss, damage, expense, or liability in connection with such use.