HL18-A1G3BH SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
HYBRID PHOTOELECTRIC SENSORS
A B C D E F H I J K L M N O P Q R S T HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Illustration may differ
Ordering information
Type Part no. HL18-A1G3BH 1082987 Other models and accessories www.sick.com/H18_Sure_Sense Detailed technical data
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Dual lens Dimensions (W x H x D) 16.2 mm x 45.5 mm x 31.8 mm Housing design (light emission) Hybrid Thread diameter (housing) M18 Mounting system type M18, head/side (24.1 … 25.4 mm) Housing color Blue Sensing range 0.03 m ... 5 m 1) Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) 130 mm x 260 mm (6.5 m) Wave length 631 nm Adjustment Potentiometer, right Sensitivity Potentiometer, left Light/dark switching Special features Signal strength light bar 1) Reflector PL80A. 2) Average service life: 100,000 h at TU = +25 °C.
2 PHOTOELECTRIC SENSORS | SICK Product data sheet | 2024-03-12 16:10:49
Subject to change without notice
HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Mechanics/electronics Supply voltage 10 V DC ... 30 V DC Ripple < 5 Vpp 1) Current consumption ≤ 20 mA 2) Switching output PNP, NPN Switching mode Dark switching Switching output detail Switching output Q1 PNP, Dark switching Switching output Q2 NPN, Dark switching Output current Imax. ≤ 100 mA Response time ≤ 0.5 ms 3) Switching frequency 1,000 Hz 4) Connection type Cable open end, 2,000 mm Cable material PVC Conductor cross section 0.2 mm² Circuit protection A 5) B 6) D 7) Protection class III Weight 18 g Polarisation filter ✔ Housing material Plastic, VISTAL® Optics material Plastic, PMMA Enclosure rating IP67 IP69K Items supplied Fastening nut (1x), M18, plastic, black, flat Electromagnetic compatibility (EMC) EN 60947-5-2 (The sensor complies with the Radio Safety Requirements (EMC) for the indus- trial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.) Ambient operating temperature –40 °C ... +70 °C Ambient temperature, storage –40 °C ... +75 °C UL File No. E189383 1) May not exceed or fall below Uv tolerances. 2) Without signal strength light bar and load. 3) Signal transit time with resistive load. 4) With light/dark ratio 1:1. 5) A = VS connections reverse-polarity protected. 6) B = inputs and output reverse-polarity protected. 7) D = outputs overcurrent and short-circuit protected. Safety-related parameters MTTFD 730.1 years DCavg 0 % Classifications ECLASS 5.0 27270902 2024-03-12 16:10:49 | Product data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS ECLASS 5.1.4 27270902 ECLASS 6.0 27270902 ECLASS 6.2 27270902 ECLASS 7.0 27270902 ECLASS 8.0 27270902 ECLASS 8.1 27270902 ECLASS 9.0 27270902 ECLASS 10.0 27270902 ECLASS 11.0 27270902 ECLASS 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528 Connection/Pin assignment Connection type Cable open end, 2,000 mm Connection type Detail Conductor cross section 0.2 mm² Cable material PVC Pin assignment BN + (L+) WH Q2 BU - (M) BK Q1
4 PHOTOELECTRIC SENSORS | SICK Product data sheet | 2024-03-12 16:10:49
Subject to change without notice
HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Dimensional drawing (Dimensions in mm (inch)) 47.5 (0.30) 10.5 (0.41) 24.1 (0.95) 25.4 (1.00) 12.7 (0.50) 10.1 (0.40) 31.4 (1.24) 15 (0.59) M18 x 10.9 (0.04) 7.9 (0.31) 45.5 (1.79) 16.2 (0.64) A C B D ① LED indicator yellow: Status of received light beam ② LED indicator green: power on ③ M3 mounting hole ④ Snap Connection for flush ring (sold seperatly) ⑤ Potentiometer (if selected) or LED Indicators Dimensions in mm (inch) Receiver Sender A B C D HTB18L / HTF18L / HL18L / HSE18L Connection type Connection type. see table: Connection/PIN assignment Cable with flying leads, 4-wire, AWG26 0.15 mm² 2024-03-12 16:10:49 | Product data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Adjustments possible ① LED indicator yellow: Status of received light beam ② LED indicator green: power on ③ Signal strength light bar Characteristic curve 0 1 (3.28) (6.56) (9.84) (13.12) (16.40) (19.67) (22.97) 100 Operating reserve Distance in m (feet) 6 2 1 ① Reflector PL80A ② Reflector PL40A ⑥ Reflective tape IREF6000 (REF-IRF-56)
6 PHOTOELECTRIC SENSORS | SICK Product data sheet | 2024-03-12 16:10:49
Subject to change without notice
HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Light spot size mm (inch) Horizontal Vertical Dimensions in mm (inch) Horizontal (0.71) (1.57) 200 (7.87) 260 (10.24) Vertical (0.39) (0.79) 100 (3.94) 130 (5.12) Sensing range 0.5 m (1.64 feet) 1 m (3.28 feet) 5 m (16.40 feet) 6.5 m (21.33 feet) Distance in m (feet) (16.40) (19.69) (13.12) (9.84) (6.56) (3.28) (22.97) 200 (7.87) 100 (3.94) 300 (11.81) Sensing range diagram /c49 /c50 /c51 /c52 /c53 /c54 4.0 5.0 4.0 5.0 1.8 3.0 1.3 2.2 0.03 0.03 0.03 0.03 0.03 5.0 6.5 Distance in m (feet) 0 1 (3.28) (6.56) (9.84) (13.12) (16.40) (19.67) (22.97) Sensing range Sensing range max. 0.4/ 0.8 1.5 ① Reflector PL80A ② Reflector PL40A ③ Reflector P250 ④ Reflector PL30A, PL31A ⑤ Reflector PL20A ⑥ Reflective tape IREF6000 (REF-IRF-56) 2024-03-12 16:10:49 | Product data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 7
A B C D E F H I J K L M N O P Q R S T HL18-A1G3BH | H18 Sure Sense HYBRID PHOTOELECTRIC SENSORS Functions 0 % 100 % 0 % 100 % 0 % 100 % 0 % 100 % 0 % 100 % Recommended accessories Other models and accessories www.sick.com/H18_Sure_Sense Brief description Type Part no. Mounting brackets and plates Universal mounting bracket for reflectors, steel, zinc coated BEF-WN-REFX 2064574 Reflectors Rectangular, screw connection, 51 mm x 61 mm, PMMA/ABS, Screw-on, 2 hole mount- ing P250 5304812
8 PHOTOELECTRIC SENSORS | SICK Product data sheet | 2024-03-12 16:10:49
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com