HL02RYC MURATA-PS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DESCRIPTION
The HL02RYC Series offers an extensive selection of input and output voltage combinations to choose from. These miniature, regulated DC/DC converters come in 24 pin DIP and SMD packages. This small size is pos- sible through the use of surface mount manufacturing technologies. The HL02RYC Series utilizes a 110 KHz push-pull oscillator in the input stage with low-drop regulators on the outputs, reducing the output noise and maintaining good efficiency. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. Product Data Sheet
ORDERING INFORMATION
HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant ABSOLUTE MAXIMUM RATINGS *Note: Refer to Reflow Profile for SMD Models. HL02R xxyzz Y C
FEATURES
N SURFACE MOUNT CONSTRUCTION N TEMPERATURE RANGE: -25 °C TO +70°C N INDUSTRY STANDARD PINOUT N ROHS COMPLIANT TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 50% 75% 100%0% 25% 50% 100%Efficiency Load TDC_HL02RYC.B02 Page 1 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL02RYC
2 WATT REGULATED DC/DC CONVERTER
Ḥ For full details go to www.murata-ps.com/rohs
PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.75 5 5.25 VDC 11.4 12 12.6 VDC 14.25 15 15.75 VDC 22.8 24 25.2 VDC Reflected Ripple Current 30 100 mAp-p ISOLATION Rated Voltage 500 VDC Test Voltage 60 Hz, 10 Seconds 500 Vpk Resistance 1 G 7 Capacitance 25 pF Leakage Current V ISO= 240VAC, 60Hz 2 μArms OUTPUT Rated Power 2 W Voltage Setpoint Accuracy ±0.5 ±5 % Temperature Coefficent ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 25 100 mVp-p BW =10Hz to 2MHz 10 mVrms 5V Output -- Singles Only 250 350 mVp-p Line Regulation High Line to Low Line ±0.5 ±1 % Load Regulation Rated Load to No Load ±0.5 ±1 % GENERAL Switching Frequency 110 kHz Package Weight 12 g MTTF per MIL-HDBK-217, Rev. F Circuit Stress Method Ground Benign T A = +25°C 1100 kHr T A = +70°C 20 kHr TEMPERA TURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. COMMON SPECIFICATIONS NOMINAL RATED RATED INPUT CURRENT INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT MIN LOAD RATED LOAD EFFICIENCY MODEL (VDC) (VDC) (mA) (mA) (mA) (%) HL02R05S05YC 5 5 400 70 640 62 HL02R05S12YC 5 12 166 70 580 69 HL02R05S15YC 5 15 134 70 580 69 HL02R12S05YC 12 5 400 40 280 60 HL02R12S12YC 12 12 166 40 250 67 HL02R12S15YC 12 15 134 40 250 67 HL02R15S05YC 15 5 400 30 230 58 HL02R15S12YC 15 12 166 30 200 67 HL02R15S15YC 15 15 134 30 200 67 HL02R24S05YC 24 5 400 15 135 62 HL02R24S12YC 24 12 166 15 120 67 HL02R24S15YC 24 15 134 15 120 67 HL02R05D12YC 5 ±12 ±83 70 640 62 HL02R05D15YC 5 ±15 ±67 70 640 62 HL02R12D12YC 12 ±12 ±83 40 270 62 HL02R12D15YC 12 ±15 ±67 40 270 62 HL02R15D12YC 15 ±12 ±83 30 220 61 HL02R15D15YC 15 ±15 ±67 30 220 61 HL02R24D12YC 24 ±12 ±83 15 135 62 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. HL02R24D15YC 24 ±15 ±67 15 135 62 Note: Other input to output voltages may be available. Please contact factory. TDC_HL02RYC.B02 Page 2 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL02RYC
PIN# SINGLES DUALS 1 +VIN +VIN
2 NU -VOUT
3 NU Common
22 NU Common
23 NU -VOUT
NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrier layer (5-40 microinches). These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maxi- mum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. THROUGH-HOLE SOLDERING INFORMATION SIDE VIEW TOP VIEW END VIEW DIP PACKAGE HL02RxxyzzYC TDC_HL02RYC.B02 Page 3 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL02RYC Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. USA: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Canada: Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com China: Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED