HL01R MURATA-PS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
HL01R revE,12/08 Page 1 L BUILT IN STANDOFFS L INDUSTRY STANDARD PINOUT
DESCRIPTION
The HL01R Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01R Series with high frequency isolation amplifiers. Reduced parts count and all surface mount construction add to the reliability of the HL01R Series. The use of surface mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. NOMINAL RATED RATED INPUT CURRENT INPUT TYPICAL PERFORMANCE CURVES
FEATURES
L INTERNAL INPUT AND OUTPUT FILTERING LSHORT CIRCUIT PROTECTED
1 WATT REGULATED
*Note: Refer to Reflow Profile for SMD Models.
ORDERING INFORMATION
HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option HL01R xxyzz Y/Z /H Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. OBSOLETE PRODUCT Contact factory for replacement model
HL01R revE,12/08Page 2 Voltage Range 4.75 5 5.25 VDC 11.4 12 12.6 VDC 14.25 15 15.75 VDC 22.8 24 25.2 VDC Reflected Ripple Current 30 100 mAp-p ISOLATION Rated Voltage 500 VDC Test Voltage 60 Hz, 10 Seconds 500 Vpk Resistance 1 G 7 Capacitance 25 pF Leakage Current V ISO= 240VAC, 60Hz 2 10 μArms OUTPUT Rated Power 1 W Voltage Setpoint Accuracy ±3 ±5 % Temperature Coefficent ±0.01 ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 30 100 mVp-p BW =10Hz to 2MHz 1 10 mVrms Line Regulation High Line to Low Line ±0.1 ±0.3 % Load Regulation Rated Load to No Load ±0.3 ±0.5 % GENERAL Switching Frequency 125 kHz Package Weight 10 g MTTF per MIL-HDBK-217, Rev. F Circuit Stress Method Ground Benign 675 kHr TEMPERATURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT MIN LOAD RATED LOAD EFFICIENCY MODEL (VDC) (VDC) (mA) (mA) (mA) (%) HL01R05S05 5 5 200 50 400 58 HL01R05S12 5 12 83 50 400 52 HL01R05S15 5 15 67 50 400 52 HL01R12S05 12 5 200 40 160 58 HL01R12S12 12 12 83 40 160 52 HL01R12S15 12 15 67 40 160 52 HL01R15S05 15 5 200 30 130 58 HL01R15S12 15 12 83 30 130 52 HL01R15S15 15 15 67 30 130 52 HL01R24S05 24 5 200 20 80 58 HL01R24S12 24 12 83 20 80 52 HL01R24S15 24 15 67 20 80 52 HL01R05D05 5 ±5 ±100 50 425 45 HL01R05D12 5 ±12 ±41 50 400 53 HL01R05D15 5 ±15 ±33 50 400 53 HL01R12D05 12 ±5 ±100 40 185 45 HL01R12D12 12 ±12 ±41 40 160 53 HL01R12D15 12 ±15 ±33 40 160 53 HL01R15D05 15 ±5 ±100 30 145 45 HL01R15D12 15 ±12 ±41 30 130 53 HL01R15D15 15 ±15 ±33 30 130 53 HL01R24D05 24 ±5 ±100 20 90 45 HL01R24D12 24 ±12 ±41 20 80 53 HL01R24D15 24 ±15 ±33 20 80 53 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Note: Other input to output voltages may be available. Please contact factory. Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.COMMON SPECIFICATIONS
HL01R revE,12/08 Page 3 RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE SIDE VIEWS TOP VIEWS END VIEWS SMD PACKAGEDIP PACKAGE HL01RxxyzzY HL01RxxyzzZ PIN CONNECTIONS PIN# SINGLES DUALS 1 +VIN +VIN
2 NU -VOUT
3 NU Common
22 NU Common
23 NU -VOUT
NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo.
HL01R revE,12/08Page 4 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. USA: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com China: Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED