HL01RZC MURATA-PS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
The HL01RZC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01RZC Series with high frequency isolation amplifiers. Reduced parts count and all surface mount construction add to the reliability of the HL01RZC Series. The use of surface mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. EFFICIENCY vs LOAD 30% 50% 75% 100%0% 25% 50% 40% 20% 10% 60% Load (mA) Efficiency (%) TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
FEATURES
/square6 LOW COST /square6 NON-CONDUCTIVE CASE /square6 INTERNAL INPUT AND OUTPUT FILTERING /square6 SHORT CIRCUIT PROTECTED /square6 BUILT-IN STANDOFFS /square6 INDUSTRY STANDARD PINOUT /square6 ROHS COMPLIANT
ORDERING INFORMATION
HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant ABSOLUTE MAXIMUM RATINGS *Note: Refer to Reflow Profile for SMD Models. HL01R xxyzz Z C RECOMMENDED LAND PATTERN 2423 22 1514 13 121110321 0.730" (18.54) 1.150" (29.21) 0.100" (2.54) 0.080" (2.03) 0.040" (1.02)
DESCRIPTION
HL01RZC.B02 Page 1 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL01RZC
1 WATT REGULATED DC/DC CONVERTER
Ḥ For full details go to www.murata-ps.com/rohs
Voltage Range 4.75 5 5.25 VDC 11.4 12 12.6 VDC 14.25 15 15.75 VDC 22.8 24 25.2 VDC Reflected Ripple Current 30 100 mAp-p ISOLATION Rated Voltage 500 VDC Test Voltage 60 Hz, 10 Seconds 500 Vpk Resistance 1 G Ω Capacitance 25 pF Leakage Current V ISO= 240VAC, 60Hz 2 10 μArms OUTPUT Rated Power 1 W Voltage Setpoint Accuracy ±3 ±5 % Temperature Coefficent ±0.01 ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 30 100 mVp-p BW =10Hz to 2MHz 1 10 mVrms Line Regulation High Line to Low Line ±0.1 ±1 % Load Regulation Rated Load to No Load ±0.5 ±1 % GENERAL Switching Frequency 125 kHz Package Weight 10 g MTTF per MIL-HDBK-217, Rev. F Circuit Stress Method Ground Benign 675 kHr Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-20 2 TEMPERATURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C PARAMETER CONDITIONS MIN TYP MAX UNITS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. COMMON SPECIFICATIONS ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. Note: Other input to output voltages may be available. Please contact factory. HL01R24D15ZC 24 ±15 ±33 20 80 53 NOMINAL RATED RATED INPUT CURRENT INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT MIN LOAD RATED LOAD EFFICIENCY MODEL (VDC) (VDC) (mA) (mA) (mA) (%) HL01R05S05ZC 5 5 200 50 400 58 HL01R05S12ZC 5 12 83 50 400 52 HL01R05S15ZC 5 15 67 50 400 52 HL01R12S05ZC 12 5 200 40 160 58 HL01R12S12ZC 12 12 83 40 160 52 HL01R12S15ZC 12 15 67 40 160 52 HL01R15S05ZC 15 5 200 30 130 58 HL01R15S12ZC 15 12 83 30 130 52 HL01R15S15ZC 15 15 67 30 130 52 HL01R24S05ZC 24 5 200 20 80 58 HL01R24S12ZC 24 12 83 20 80 52 HL01R24S15ZC 24 15 67 20 80 52 HL01R05D05ZC 5 ±5 ±100 50 425 45 HL01R05D12ZC 5 ±12 ±41 50 400 53 HL01R05D15ZC 5 ±15 ±33 50 400 53 HL01R12D05ZC 12 ±5 ±100 40 185 45 HL01R12D12ZC 12 ±12 ±41 40 160 53 HL01R12D15ZC 12 ±15 ±33 40 160 53 HL01R15D05ZC 15 ±5 ±100 30 145 45 HL01R15D12ZC 15 ±12 ±41 30 130 53 HL01R15D15ZC 15 ±15 ±33 30 130 53 HL01R24D05ZC 24 ±5 ±100 20 90 45 HL01R24D12ZC 24 ±12 ±41 20 80 53 HL01RZC.B02 Page 2 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL01RZC
PIN# SINGLES DUALS 1 +VIN +VIN
2 NU -VOUT
3 NU Common
22 NU Common
23 NU -VOUT
NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrier layer (5-40 microinches). The surface mount versions of the HL01RZC series are designed for SMT reflow soldering. During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device should not exceed 3 degrees C per second. SMT SOLDERING INFORMATION SIDE VIEWS TOP VIEWS END VIEWS Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò Ò (,2XXYZZ:# SMD PACKAGE These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. THROUGH-HOLE SOLDERING INFORMATION 10/10/08 HL01RZC.B02 Page 3 of 3 Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000www.murata-ps.com HL01RZC Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. USA: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Canada: Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com China: Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 10/10/08