HHS60ZE POWER-ONE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Open-frame design with Insulated Metal Substrate
  • Low profile – 12.7 mm height
  • Input/output isolation: 1500VDC, meets basic insulation requirements
  • Start-up into high capacitive load
  • Output back-drive capability
  • Low conducted and radiated EMI
  • Output overcurrent protection
  • Output overvoltage protection
  • Overtemperature protection
  • Remote sense
  • Set point accuracy ± 1.0%
  • Remote on/off, positive or negative logic
  • Output trim, positive or negative
  • UL 1950 Recognition, CSA 22.2 No. 950-95 certification, TUV IEC950

Description

HHS60 single-output DC/DC converters provide up to 60A output current in an industry-standard, half-brick package. This high-density product converts standard telecom and datacom input voltages to regulated, low output voltages. The HHS60's leading-edge technology provides high efficiency. Its thermal design enables delivery of full-rated power at 55°C ambient temperature by using only 200 LFM of forced-air cooling without the need of a heatsink. Selection Chart Model Input voltage VDC Input current max, ADC Output voltage VDC Output current ADC Output ripple/noise (mV p-p) Typical efficiency HHS60ZE 36-75 5.0 3.3 60 200 89.0 HHS60ZD 36-75 4.9 2.5 60 200 88.0 HHS60ZB 36-75 3.6 1.8 60 200 86.0 HHS60ZA 36-75 3.1 1.5 60 200 84.0 HHS60ZY 36-75 3.1 1.2 60 200 82.0

HHS60 Series – 60A Half-Brick DC/DC Converter 48V Input 3.3V, 2.5V, 1,8V, 1.5V, 1.2V Outputs Page 2 of 2 www.power-one.com Mechanical Drawing Tolerances: .xx ± .020 (.5) .xxx ± .010 (.25) Pin diameter ± .0.002 (.05)

Ordering Information

Options Suffixes to add to part number Positive- Standard, no suffix requiredRemote On/Off Negative- Add “N” suffix Negative- Standard, no suffix requiredTrim Lucent compatible- Add “T” suffix 0.18”- Standard, no suffix required 0.11”- Add “8” suffix Pin Length 0.15”- Add “9” suffix Notes 1. Consult factory for the complete list of available options. 2. Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. 3. Specifications are subject to change without notice. Pin Function 1- V i n 2C a s e 3O N / O F F 4+ V i n 5 -Vout 6- S e n s e 7T r i m 8+ S e n s e 9 +Vout