HH-109 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • 0° - 180° Hybrid with High Isolation
  • Usable from 500 KHz - 500 MHz
  • MIL-STD-202 Screening Available

Description

3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase differential and for Quadrature combining or performing summation/differential combining. FP-2 (HH-109) SF-1 (HHS-109) Pin Configuration (HHS-109) Pin No. Function Pin No. Function

1 A 3 B

2 C 4 D

Pin Configuration (HH-109) Pin No. Function Pin No. Function

1 A 5 B

2 GND 6 GND

3 GND 7 GND

4 C 8 D

C B D 180° A Hybrid Magic Tee

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Hybrid Junction, 5 - 200 MHz Rev. V3 HH- / HHS-109 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. 1. 0 0 1. 5 0 2.00 2.50 3.00 Frequency (GHz) All Ports Electrical Specifications1: TA = -55°C to +85°C Typical Performance Curves Isolation Insertion Loss Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 200 MHz dB — — 1.4 Isolation 5 - 100 MHz 100 - 200 MHz dB dB Amplitude Balance — 5 - 200 MHz dB — — 0.3 VSWR — 5 - 100 MHz 100 - 200 MHz Ratio Ratio 1.5:1 1.7:1 Phase Balance — 5 - 100 MHz 100 - 200 MHz Impedance — — Ohms — 50 — Input Power — — Watts — — 0.5 1. All specifications apply with 50 ohm source and load impedance.

Ordering Information

Frequency (MHz) Ports A- C, A- D 11251 0 2 0 5 0 1 0 0 2 0 0 5 0 0 Frequency (MHz) Ports A- B, C- D VSWR