HDN1102W-TR

HDN1102W-TR STANLEY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 22

Technical content

Features

Page : 1 2014.10.28

NO. PART NAME MATERIALS QTY. ① LED die GaAlAs 1 ② Mold resin Epoxy resin 1 ③ Substrate Glass fabrics 1 Unit：mm Outline Dimensions Unit ：mm Weight ：7.8mg Tolerance ：±0.2 Recommended Pad Page : 2 2014.10.28

【 Absolute Maximum Ratings 】 Tstg mA/℃ -40 ～ +100 Soldering temperature "Reflow soldering" 0.67 V mA/℃ ℃260Tsld mW ITEM SYMBOL MAXIMUM RATINGS mA mA UNIT Operating temperature Storage temperature Forward current derating factor from 25℃ Δ IF -30 ～ +85 VR 4Δ IFRM Reverse voltage Repetitive peak forward current derating factor from 25℃ Topr Repetitive peak forward current "0.1ms,1/100duty" 300IFRM Power dissipation Forward current IF Pd Note1 Note1 Please refer to page 9, soldering Conditions. (Ta=25℃) Specifications Page : 3 2014.10.28

MAX. 3.2 6.4 MIN. A 4.42.2 IF = 20mA Ta = 25℃ Radiant Intensity (IE) Radiant intensity I E (mW/sr) B 【 Electro-Optical Characteristics 】 (Ta=25℃) IF = 20mA nmλ p - 100 1.80 1.25 Co 1.45 830 Total power Peak wavelength IE Po IF = 20mA ITEM SYMBOL CONDITION 6.4 VF Capacitance MIN. MAX. 2.2 IR IF = 20mARadiant intensity IF = 20mA V=0V, f=1MHz Reserve current VR = 5V -Cut-off Frequency IF = 20mADC +10mAp-p -3db from 1MHz Forward voltage fc UNIT V TYP. mW/sr - mW pF 850 870 μA MHz20 - 8.5 IF = 20mA2θ1/2Half intensity angle 60 (θ x) 60 (θ y) deg.-- Specifications LEDs shall be sorted out into the following chart. 【 Sorting Chart for Radiant Intensity 】 Page : 4 【 Shipment 】 The each shipping lot shall consist of mixed rank (A, B, ) and the quantity of LEDs in each rank can not be specified. 2014.10.28

-100 -50 0 50 100 -30 -60 -90 100 50 0 50 100 Spatial Distribution Conditions: Ta = 25℃, IF = 20mA 0.0 0.2 0.4 0.6 0.8 1.0 1.2 700 750 800 850 900 950 1000 Wavelength vs. Relative Intensity Conditions: Ta = 25℃, IF =20mA Wavelength : (nm) Relative Intensity Technical Data Relative radiant intensity : (%) Same shape for x , y Directions Page : 5 x y 2014.10.28

1,000 0.001 0.01 0.1 1 100 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 150 200 250 300 350 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Duty Ratio vs. Pulse Forward Current Condition : Ta = 25℃, tw ≦100μs Duty Ratio Ambient temperature vs. Power Dissipation Ambient Temperature : Ta (℃) Ambient Temperature vs. Pulse Forward Current Condition : tw ≦100μs, Duty ≦ 1/100 Ambient Temperature : Ta (℃) Ambient Temperature vs. Forward Current Ambient Temperature : Ta (℃) Forward Current : IF (mA) Technical Data Page : 6 Power Dissipation : Pd (mW) Pulse Forward Current : IFRM (mA) Pulse Forward Current : IFRM (mA) 2014.10.28

-30 -20 -10 0 10 20 30 40 50 60 70 80 90 Duty=1% Duty=5% Duty=50% DC Duty=20% Duty=10% 0.1 -40 -20 0 20 40 60 80 100 1.2 1.3 1.4 1.5 1.6 1.7 -40 -20 0 20 40 60 80 100 Ambient Temp. vs. Relative Radiant Intensity Condition : IF = 20mA Ambient Temperature : Ta (℃) Ambient Temperature vs. Maximum Forward Current Condition : tw =≦0.1ms Ambient Temperature : Ta (℃) Ambient Temperature vs. Forward Voltage Condition : IF = 20mA Ambient Temperature : Ta (℃) Forward Voltage : VF (V) Relative Radiant Intensity Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Voltage : VF (V) Forward Current : IF (mA) Maximum Forward Current : IFMAX (mA) Technical Data Page : 7 2014.10.28

-40 -20 0 20 40 60 80 100 0.1 100 1 10 100 1,000 0.1 1 10 100 100 1,000 Forward Current vs. Relative Radiant Intensity Condition : Ta = 25℃ Forward Current : IF (mA) Pulse Forward Current vs. Relative Radiant Intensity Condition : Ta = 25℃, tw ≦ 100μs, Duty ≦ 1/100 Pulse Forward Current : IFRM (mA) Pulse Forward Voltage vs. Pulse Forward Current Condition : Ta = 25℃, tw ≦ 100μs, Duty ≦ 1/100 Pulse Forward Voltage : VFM (V) Pulse Forward Current : IFRM (mA) Relative Radiant Intensity Technical Data Page : 8 Relative Radiant Intensity Ambient Temperature vs. Peak Wavelength Condition : IF = 20mA Ambient Temperature : Ta (℃) Peak Wavelength (nm) 2014.10.28

1. Heat stress during soldering will influence the reliability of LEDs, however that effect will vary on heating method. Also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount LED). 2. LED parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. Please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials. 3. Recommended temperature profile for the Reflow soldering is listed as the temperature of the resin surface. Temperature distribution varies on heating method, PCB material, other components in the assembly, and mounting density. Please do not repeat the heating process in Reflow process more than twice. Notes 1 Temperature Profile for the reflow should be set to the surface temperature of resin which is on the top of LED. This should be the maximum temperature for soldering. Lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability. Notes 2 The reflow soldering process should be done up to twice(2 times Max). When second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of LED. The second soldering process should not be done until LEDs have returned to room temperature (by nature-cooling) after first soldering process. 【Soldering Precaution】 (acc.to:EIAJ-4701/300) 【Recommended Reflow Soldering Condition】 40sec MAX. 150℃～180℃ +1.5～+5℃/s 260℃ MAX. -1.5～-5℃/s 90~120sec MAX. （Pre-heating） (Soldering） 230℃ MAX. Peak Temperature Page : 9 2014.10.28

1. If soldering manually, Stanley recommends using a soldering iron equipped with temperature control. During the actual soldering process, make sure that the soldering iron never touches the LED itself, and avoid the LED's electrode heating temperature reaching above the heating temperature of the solder pad. All repairs must be performed only once in the same spot, and please avoid reusing components. 5. In soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature before using. Also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 6. When using adhesive material for tentative fixatives, thermosetting resin or Ultraviolet radiation (UV) setting resin with heat shall be recommended. 《The curing condition, Temperature:150℃Max./Time:120sec.Max.》 7. Flow soldering (dip soldering) is not recommended for this product. 8. Isopropyl alcohol is recommended for cleaning. Some chemicals, including Freon substitute detergent could corrode the lens or the casing surface, which cause discoloration, cloud, crack and so on. Please review the reference chart below for cleaning. If water is used to clean (including the final cleaning process), please use pure water (not tap water), and completely dry the component before using. Cleaning with ultrasonic is not recommended. 【Recommended Manual Soldering Condition】 Temperature of Iron Tip 350℃MAX. Soldering Duration, Time 3sec.Max.,1 time Chemical Adaptability Isopropyl Alcohol ○ Trichloroethylene × Chlorothene × Acetone × Thinner × Page : 10 2014.10.28

【 Precautions 】 1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However, the performance may vary depending on usage conditions 2. Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature, current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously. 3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions should be taken it to account for designing. ( Derating of TYP., MAX Forward Voltage, etc.) 4. Please insert Protective Resistors into the circuit in order to stabilize LED operation and to prevent the device from igniting due to excess current. 5. Please check the actual performance in the assembly because the Specification Sheets are described for LED device only. 6. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision. 7. The products are designed to operate without failure in recommended usage conditions. However, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise. 8. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 9. The formal specification sheets shall be valid only by exchange of documents by both parties. Page : 11 2014.10.28

This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as shown below) to minimize moisture absorption during transportation and storage. However, with regard to storing the products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture-proof bag as the packaging is made of anti-static material but packaging box is not. The package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is 【maximum 72h】. If the device needs to be soldered twice, both soldering operations must be completed within 72h. If any components should remain unused, please reseal the package and store them under the conditions described in the 【 Recommended Storage Condition 】 above. This product must be required to perform baking process (moisture removal) for at 23h( MIN.) at 60±5 degrees Celsius if following conditions apply. 1.In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its blue color. 2. In the case of time passes for 72h after the package is opened once. Baking process should be performed after LED having been taken out of the package. Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it has returned to room temperature. Provided that, baking process shall be 2 times MAX. 【Time elapsed after Package Opening】 In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】. Please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. 【Recommended Storage Condition / Products Warranty Period 】 Temperature +5～30℃ Humidity Under 70% Page : 12 2014.10.28

【Moisture-proof Packaging Specification】 Fastener for re-storage after opening bag. Customer's opening position. Product Label Heat sealing position (after product being put in) Desiccant with indicator for moisture level is enclosed. A SYM. PART NAME MATELRIAL REMARKS ① Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection Yes No Yes No Yes No Baking LED under recommended condition Product Mounting Unused-product remained Return to moisture-proof package and seal Finished Reopen the moisture-proof package Flow chart：Package Opening to Mounting Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Discoloration of silica gel Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. 【Flow Chart-package Opening to Mounting】 Page : 13 2014.10.28

【 Packing box 】 ( RoHS・ELV Compliant) The above measure is all the reference value. The box is selected out of the above table by shipping quantity. Packaging Specifications Type A Material / box ： Cardboard C5BF Type B,C Material / box ： Cardboard K5AF Partition ： Cardboard K5AF Box Type Outline dimension L × W × H (mm) Capacity of the box Type A 280 × 265 × 45 (mm) 3 reels Type B 310 × 235 × 265 (mm) 15 reels Type C 440 × 310 × 265 (mm) 30 reels Page : 14 B No. PART NAME MATELRIAL REMARKS ② Packing Box Corrugated Cardboard without ESD protection 2014.10.28

【 Label Specification】 ( acc.to ; JIS-X0503(Code-39) Product label A. Parts number B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity E. Bar-Code for packed parts quantity F. Lot number & Rank (16 digits) G. Bar-Code for Lot number & Rank Opto device label A. Custmer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number <Remark> Bar-code font : acc.to Code-39(JIS-X0503) Packaging Specifications B A Page : 15 2014.10.28

Lot Number Notational System ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① - 1digit ： Production Location (Mark identify alphabet) ② - 1digit ： Production Year (Last digit of Production Year 2009→9,2010→0,2011→1,･･･) ③ - 2digits ： Production Month (Jan. to Sep. , should be 01,02,03,･････) ④ - 2digits ： Production Date ⑤ - 3digits ： Serial Number ⑥ - 2digits ： Tape and Reel following Number ⑦ - 2digits ： Luminous Intensity Rank. (If luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified intensity rank, "- -" is used to indicate.) ⑧ - 2digits ： Chromaticity Rank (If chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified intensity rank, "- -" is used to indicate.) ⑨ - 1digit ： Option Rank (Stanley normally print "-" to indicate) Page : 16 2014.10.28

Taping and Reel Specifications (acc.to ; JIS-C0806-03） 1. Appearance Note "-TR" means cathode side of LEDs should be placed on the sprocket-hole side. ITEMS SPECIFICATIONS REMARKS Leader area Cover-tape Cover-tape shall be longer than 200mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Carrier-tape Empty pocket shall be more than 10 pieces. Please refer to the above figure for Taping & reel orientation . Trailer area Empty pocket shall be more than 15 pieces. The end of taping shall be inserted into a slit of the hub. Page : 17 2014.10.28

Taping and Reel Specifications (acc.to ; JIS-C0806-03） 2. Qty. per Reel 3. Mechanical strength 2,500parts/reel Minimum Qty. per reel might be 500 parts when getting less than 2,500 parts. In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label. Cover-tape adhesive strength shall be 0.1～1.0N ( An angle between carrier-tape and cover-tape shall be165～180 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 25mm. 4. Others Page : 18 Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. Max qty. of empty pocket per reel shall be defined as follows. 1,500 500 2,500 1,000 RemarksMax.Qty. of empty pocket No continuance

2 No continuance

22,000 Qty./Reel 2014.10.28

② ① 5. Taping Dimensions 6. Reel Dimensions Taping and Reel Specifications (acc.to ; JIS-C0806-03） Unit ：mm SYMBOL PART NAME REMARKS Carrier-tape without ESD protection Cover-tape with ESD protection without ESD protectionCarrier-reel Page : 19 2014.10.28

Correspondence to RoHS・ELV instruction This product is in compliance with RoHS・ELV. Prohibition substance and it's criteria value of RoHS・ELV are as follows. ・RoHS instruction …… Refer to following (1)～(6). ・ELV instruction ………. Refer to following (1)～(4). Substance Group Name Criteria Value (1) Lead and its compounds 1,000ppm Max (2) Cadmium and its compounds 100ppm Max (3) Mercury and its compounds 1,000ppm Max (4) Hexavalent chromium 1,000ppm Max (5) PBB 1,000ppm Max (6) PBDE 1,000ppm Max Page : 20 2014.10.28

Reliability Testing Result 1. Reliability Testing Result 2. Failure Criteria Page : 21 Low temperature (Storage) Resistance to soldering heat Moisture Soak ： Ta=30℃, RH=70%, 72h Preheating ： 150～180℃ 120sec. Max. Soldering ： 230～260℃ 40sec. Max. 2 times 1,000hTa=25℃ IF=50mA Ta=100℃ 1,000h TEST ITEM Humidity (Steady state) Ta=60℃ Rh=90% TEST CONDITION DURATION 2h of each direction98.1m/s 2(10G) 100～2,000Hz 20min. Sweep XYZdirection Operating life Temperature cycling 1,000h 1,000h Ta=-40℃ Vibration fatigue High temperature (Storage)2014.10.28 Radiant Intensity IE IF=20mA Testing Min. Value ＜ Initial Value Min. × 0.5 Forward Voltage VF IF=20mA Testing Max. Value ≧ Initial Value Max. × 1.2 Cosmetic appearance - - Notable Discoloration, Deformation and Cracking Item Symbol Conditions Failure Criteria

1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en/ Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet Page : 22 2014.10.28