HDK3261 EUROQUARTZ | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE EURO QUARTZ
DESCRIPTION
Femtosecond integrated phase jitter (200fs typical) Superior phase noise (-144dBc/Hz at 100kHz) High performance and low price Supply voltage 2.5 or 3.3 Volts OUTLINE & DIMENSIONS Frequency Range: 13.5MHz to 200.0MHz Output Logic Differential LVDS square wave Phase Noise: Frequency Stability: Operating Temp Range Commercial: -10° to +70°C Industrial: -40° to +85°C Input Voltage: +2.5V±5% or +3.3VDC±5% Output Voltage High '1': 1.43V typ., 1.6V max., (RL = 100Ω) Low '0': 0.9V min., 1.1V typ., (RL = 101Ω) Integrated Phase Noise: 0.2ps typical, 0.5ps maximum Output Swing: 350mV minimum (Vdd = 2.5V) Load: 50Ω into Vcc-2V Rise/Fall Times: 0.3ns typical, 0.5ns typical. Duty Cycle: 50±10% Current Consumption: 30mA typical, 50mA maximum Enable/Disable (Pad 1) Enable: No connection or min. 70% Vdd is applied to pad 1. Disable: 30% Vdd max. applied to pad 1. Output: internal pull-up. Oscillation enable time is 2ms max. Start-up Time: 10ms max. Ageing: ±3ppm per year max., ±2ppm thereafter. At T amb +25°C ABSOLUTE MAXIMUM RATINGS ( ) Supply Voltage: Vss -0.5V min., 5.0V max. Input Voltage: Vss -0.5V min., Vdd +0.5V max. Input Voltage: Vss -0.5V min., Vdd +0.5V max. SPECIFICATION HDK3261 DIFFERENTIAL LVDS OSCILLATORS 3.2 x 2.5 x 1.0mm 6 pad SMD STABILITY OVER TEMPERATURE RANGE Stability Temperature Range Order Code ±ppm °C 25 -10 to +70 A 50 -10 to +70 B 100 -10 to +70 C 25 -40 to +85 D 50 -40 to +85 E 100 -40 to +85 F TYPICAL PHASE NOISE (156.250MHz) 13.50MHz to 200.0MHz Offset 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz dBc/Hz -75 -90 -120 -135 -142 -147 -155 'Green' Requirements: RoHS 6/6 (2002-95/EC) and WEEE (2002/96/EC) Compliant MSL Level: Level 1 per IPC/JEDEC J-STD-020D.1 Storage Temperature Range: -55°C to +125°C Humidity: 85% RH, 85°, 48 hours Hermetic Seal: Leak rate 2*10 -8 Atm-cm3/sec. max. Solderability: MIL-STD-202F Method 208E Reflow: 260°C for 10sec. max., 2 times max. Vibration: MIL-STD-202F Method 204, 35g 50 to 2000Hz Shock: MIL-STD-202F Method 213B test condition E, 1000g, ½ sine ESD Protection: 2kV max. Human body model Contact pad surface finish: Gold (Au) (0.3~1.0µm) on Nickel (N) (1.27~8.89µm) Weight per unit: 160mg typical ENVIRONMENTAL PERFORMANCE SPECIFICATION PART NUMBERS HDK5361 oscillator part numbers are derived as follows: Example: 25HDK5361-A-156.250 Supply Voltage 25 = 2.5VDC 3 = 3.3VDC Series Designation Temperature Stability Code A~F (See table) Frequency 25 HDK5361 - A - 156.250