HDH-00803GHD HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Couplers with Connectors (H Type) HDH Series I Features 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation. 2.Power Uniform Distribution and 90˚Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 90˚phase difference between the two outputs (or two inputs). 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. I Product Specifications Note: The frequency range and the maximum input power will differ depending on the products. G The test method conforms to MIL-STD-202. I Materials Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 2 to 50 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max. Item Standard Conditions 1.Contact resistance 4 mohms max . 1 A 2.Insulation resistance1000 M ohms min. 100 V DC 3.Vibration Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 4.Shock Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 5.Temperature cycle No damage, cracks, or parts dislocation Connector Body Stainless steel Passivated Connector female contactsBeryllium copper Gold plating Board Dielectric Gold plating Part Material Finish HDH-00803GHD HDH-01503GHD HDH-01503GH HDH-03003GHD HDH-06003GHD HDH-09003GHD HDH-12803CHD Temperature : -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç Time : 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes) 200 cycles No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation

Series Name: HD (Directional Couplers) Type of Connector H: Indicates the HRM (SMA) Series Center Frequency 008: 0.75GHz 015: 1.5GHz 017: 1.7GHz 020: 2.0GHz 030: 3.0GHz 040: 4.0GHz 060: 6.0GHz 090: 9.0GHz 128:12.8GHz I Ordering Information I Specifications HD H - 008 03 G H D 1 2 3 4 5 6 7 Coupling 03:3dB Frequency Relative Bandwidth B:From 5% to below 10% C:From 10% to below 15% D:From 15% to below 20% G:From 30% to below 35% Form H:H Type D:With Termination Frequency Range (GHz) Coupling (dB) Frequency Sensitivity Directivity (dB Min) Primary Line V.S.W.R. (Max) Secondary Line V.S.W.R. (Max) Weight (g) Power (W) Part Number G Directivity have had the coupling (nominal value of 3 dB) subtracted. G There is a phase difference of 90°between the output and the coupling.

Couplers with Connectors (I Type) HDH Series I Features 1.High Performance The high frequency characteristics feature. Extremely high degree of matching, and high isolation. 2.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 3.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. 4.Full Coupling Variations Full variations of coupling over 6 dB are available. I Product Specifications Note: The frequency range and the maximum input power will differ depending on the products. G The test method conforms to MIL-STD-202. I Materials Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 4 to 50 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max. Item Standard Conditions 1.Contact resistance 4 mohms max. 1 A 2.Insulation resistance1000 M ohms Max. 100 V DC 3.Vibration Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 4.Shock Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç 5.Temperature cycle No damage, cracks, or parts dislocation Time : 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes) 200 cycles Connector Body Stainless steel Passivated Connector female contactsBeryllium copper Gold plating Board Dielectric Gold plating Part Material Finish HDH-01510GID HDH-02249AI HDH-03020GID HDH-12806CID HDH-09010GID HDH-06020GID HDH-00810GID No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation

Series Name: HD (Directional Couplers) Type of Connector H: Indicates the HRM (SMA) Series Center Frequency 008 : 0.8GHz 009 : 0.9GHz 015 : 1.5GHz 017 : 1.7GHz 022 : 2.2GHz 030 : 3.0GHz 060 : 6.0GHz 090 : 9.0GHz 128 : 12.8GHz Coupling 06 : 6dB 10 : 10dB 20 : 20dB 30 : 30dB 37 : 37dB 49 : 49dB Frequency Relative Bandwidth C: From 10% to below 15% G: From 30% to below 35% Form I: I Type, H: H Type D: With Termination Isolation port with termination is designated as D at the end of each part No. Frequency Range (GHz) Coupling (dB) Frequency Sensitivity (dB) Insertion Loss (dB MAX) Directivity (dB MIN) Primary Line V.S.W.R. (MAX) Secondary Line V.S.W.R. (MAX) Weight (g) Power (W) HD H - 008 10 G I D 1 2 3 4 5 6 7 G The coupling loss component is not included in the insertion loss (unless the item is marked with an π symbol) _2.0 _1.5 Part Number