HDGLDLTE-LFF PCTEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- No tune, multi-band coverage: dual 4G LTE and GPS L1/Galileo, and GLONASS L1 frequencies
- Ruggedized UV-resistant, fiberglass reinforced housing for added impact shock absorption and integrity in high vibration installations
- IP67 compliant design provides maximum protection against water or dust ingress under severe environmental conditions*
- RF240 low loss pigtails for LTE and high quality connectors for maximum RF system efficiency
- Metal 1-inch stud mount with slotted jam nut provides single cable exit for easier installation and/or antenna replacement
- Proprietary filtering design allows wideband coverage while achieving superior out-of-band rejection for all GNSS frequencies Multi-Band L TE MIMO Antenna with High Rejection GPS/GLONASS, Heavy-Duty ELECTRICAL SPECIFICATIONS - RF ANTENNA Frequency Range Elements Polarization Nominal Impedance Gain* (typical) Maximum Power VSWR 698-960 MHz / 1710-2700 MHz 4G LTE Elements (2 each) Vertical, linear 50 ohms 2.5 dBi 50 watts < 2.0:1 STANDARD CONFIGURATION Model Cables Connectors Mounting Method HDGLDLTE-LFF Two 1-foot PFP240 low loss (LTE) One 1-foot RG-174/U (GNSS) Male SMA (LTE) Male SMA (GNSS) 1-inch OD, 3/4-inch long (.75”) zinc stud mount with jam nut for permanent mount installations Rhino Permanent Mount HDGLDLTE-LFF ELECTRICAL SPECIFICATIONS - GNSS ANTENNA Frequency Band Amplifier Gain Output VSWR DC Current DC Voltage Noise Figure: Out-of-Band Rejection: 1565-1608 MHz @ 3.0 VDC: 26 dB (typical) 2.0:1 (maximum) 25 mA (typical) 2.8-6.0 V (operating) ≤ 12.0 V (survivability) < 2.0 dB (typical) f0 = 1586 MHz f0 ± 50 MHz: ≥ 60 dBc f0 ± 60 MHz: ≥ 70 dBc RoHS COMPLIANT
PCTEL, Inc. WEB: www.antenna.com MOBILE ANTENNAS HDGLDLTE-LFF Multi-Band L TE MIMO Antenna with High Rejection GPS/GLONASS, Heavy-Duty MECHANICAL & ENVIRONMENTAL SPECIFICATIONS Dimensions Housing Material Gasket Design & Construction Temperature Range Ingress Protection 10.04 L x 3.9 H x 2.19 W in (255 x 100 x 55.8 mm) Off-White GFR-PC (Polycarbonate) Contour matching, conformable, thermoplastic-elastomer gasket designed to seal between radome and baseplate. Gasket flexes and conforms to contoured surfaces. Baseplate has a 3M™ VHB mounting pad for anti-rotation. -40°C to +85°C IP67** ELECTRICAL SPECIFICATIONS - GNSS ANTENNA Frequency Band Nominal Gain Polarization Nominal Impedance 1565-1608 MHz 3 dBic @ 90° -2 dBic @ 20° Right hand circular 50 ohms Rhino Permanent Mount ** When installed according to the manufacturer’s installation instructions. RoHS COMPLIANT