HDF0505 SHINDENGEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Voltage See Model Selection Table Max. Input Current Input Full Load Voltage Input Current 5V 1.1 to 0.6A 12V 0.55 to 0.27A 24V 0.26 to 0.14A 48V 0.15 to 0.07A OUTPUT Output Voltage See Model Selection Table Set Point ±5% Regulation Total ±5% (5% to 100% load change) Noise & Ripple, (peak-to-peak) 5V Output 100 mV max. +12V, ±12V Output 120 mV +15V, ±15V Output 150 mV Output Current See Model Selection Table Short-Circuit Protection Special constant-current circuit provides indefinite protection against overload or short circuit

FEATURES

n Compact, Single In-Line Package n Single and Dual Output n Wide-Range Input n Input and Output Filters Insulation Resistance 100 M V at 500 VDC Dielectric Strength 500 VDC for 1 minute ENVIRONMENTAL Operating Ambient Temp. –10 to +70°C (See Derating Chart) Storage Temp. –30 to +80°C

1500 VAC Isolation available on some models – consult the factory

5 0.6 HDF0505S HDF1205S HDF2405S HDF4805S 77 - 80% 12 0.26 HDF0512S HDF1212S HDF2412S HDF4812S 80 - 85% 15 0.21 HDF0515S HDF1215S HDF2415S HDF4815S 80 - 85% ±12 0.125 HDF0512D HDF1212D HDF2412D HDF4812D 74 - 77% ±15 0.1 HDF0515D HDF1215D HDF2415D HDF4815D 74 - 77% MODEL SPECIFICATIONS DERATING CHART

3 Watt HD Series

0 –30 –10 50 70 80 HDF12XX, HDF24XX + IN Input Capacitor Power Switching Circuit Feed back Dual Output Type Input Voltage Monitoring Cicuit Control Circuit

3 Terminals

Voltage Reg. Switching Circuit OUT COM Output Voltage Detector Cicuit BLOCK DIAGRAM

Weight 0.6 oz (16 g) 1.76 (44.5) 0.81 (20.5) HDF–0512D 0.09 (2.29) 13 X 0.10 = 1.3 1234567 Date Code Model No. 1401IN OUT + + – – + o – 0.44 (10.5) 0.23±0.02 (5.84) Face 0.25±0.04 (6.35) 7- 0.025 (0.64) Md lN PIN # 1 2 3 4, 5 6, 7 FUNCTION-D OUT– COM OUT+ IN– IN+ FUNCTION-S NC OUT– OUT+ IN– IN+ PIN DESCRIPTION Dimensions in inches; ( ) Dimensions in mm. 1.76 (44.5) 0.81 (20.5) HDF–0512D 0.24±0.04 (6.1)

234567 Date Code

Model No. 1401IN OUT + + – – + o – 0.44 (10.5) Face 0.08±0.02 (2.03) -5V +5V HDF -0505 IN: +5V OUT: –5V IN+ OUT + OUT –IN– -5V +5V HDF -0505 IN: –5V OUT: +5V IN+ OUT + OUT –IN– +10V +5V HDF -0505 IN: +5V OUT: +10V IN+ OUT + OUT –IN– +5V HDF -0512 IN: +5V OUT: +24V IN+ OUT + OUT – IN– +5V Load G +5V HDF -0512 IN: +5V OUT: +12V, +24V IN+ OUT + OUT – COM IN– +5V +12V Load G Load +5V HDF -0512 IN: +5V OUT: ±24V IN+ OUT + OUT – IN– HDF -0512 IN+ OUT + OUT – IN– +24V —24V Load Load G APPLICATION EXAMPLES 1. Reverse Polarity Output 3. Series Connection of Dual Output modules 2. Series Connection of Output with Input 4. Series Connection of Two or More Units n The output current capacity is the same as the output current capacity of the converter. (For example, an HDF-0505 connected as shown above has an output rating of 10 VDC at 600 mA. n The combined output regulation is: (Output regulation of HDF-0505) + (Input Voltage Fluctuation) n Because the current output from the OUT-terminal is the sum of the +24V and the +12V outputs, this value must not exceed the rated output current. In the HDF-0512D, this value is 125 mA. With optional formed leads available - use "-F suffix."